Professional Documents
Culture Documents
R05 222104 Electrical & Electronics Engineering
R05 222104 Electrical & Electronics Engineering
No: 34046
R05 SET-1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
II .B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
ELECTRICAL & ELECTRONICS ENGINEERING
(AERONAUTICAL ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---
1.a) What are the different types of elements used in electrical circuit? Explain the
importance of each of them.
b) From the basic definitions obtain the expression for power & Energy. [8+8]
2.a) Explain the differences between cumulative compound generator & differential
compound generator.
m
b) A 440 V DC compound generator has an armature; series field & shunt field
co
resistance of 0.5 Ω, 1.0 Ω and 200 Ω respectively. Calculate the generated voltage
generator.
ld .
while delivering 40 A to external load, with generator connected as long shunt
[8+8]
o r
3.a) What is the maximum efficiency of transformer? Obtain the condition for same.
b) Explain the differences between efficiency & regulation of transformer. Give the
t u w
related equations. For an ideal transformer what will be values of these quantities?
[8+8]
jn
4.a) Explain various losses taking place in IM.
w .
b) A 4-pole, 3-Φ, 50 Hz, IM supplies a useful torque of 160 Nm at 5% slip. Calculate:
rotor input, motor input, efficiency if friction & windage losses are 500 W and
stator losses are 1000 W. [6+10]
w
5.a) What is the principle of operation used in attractive type and repulsive type of
6.a) Explain the operation of a PN- junction under forward and reverse bias condition
with neat diagram.
b) Explain diode as a half-wave rectifier with circuit diagram and necessary
waveforms. [8+8]
*********
co m
ld .
o r
t u w
w . jn
w w
Code.No: 34046
R05 SET-2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
II .B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
ELECTRICAL & ELECTRONICS ENGINEERING
(AERONAUTICAL ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---
1.a) What is the maximum efficiency of transformer? Obtain the condition for same.
b) Explain the differences between efficiency & regulation of transformer. Give the
related equations. For an ideal transformer what will be values of these quantities?
[8+8]
m
b) A 4-pole, 3-Φ, 50 Hz, IM supplies a useful torque of 160 Nm at 5% slip. Calculate:
co
rotor input, motor input, efficiency if friction & windage losses are 500 W and
stator losses are 1000 W.
ld . [6+10]
3.a) What is the principle of operation used in attractive type and repulsive type of
Moving Iron Ammeter and Voltmeter?
o r
b) Give the constructional details, working and deflecting torque of attractive type of
Moving Iron instrument.
t u w [8+8]
4.a) Explain the operation of a PN- junction under forward and reverse bias condition
jn
with neat diagram.
waveforms.
w .
b) Explain diode as a half-wave rectifier with circuit diagram and necessary
[8+8]
w w
5.a) Explain input and output characteristics of CE configuration with necessary
diagrams.
b) Define α, β and γ.
c) If in a transistor IC= 4.9mA and IE= 5mA, find α and β. [8+3+5]
7.a) What are the different types of elements used in electrical circuit? Explain the
importance of each of them.
b) From the basic definitions obtain the expression for power & Energy. [8+8]
8.a) Explain the differences between cumulative compound generator & differential
compound generator.
b) A 440 V DC compound generator has an armature; series field & shunt field
resistance of 0.5 Ω, 1.0 Ω and 200 Ω respectively. Calculate the generated voltage
while delivering 40 A to external load, with generator connected as long shunt
generator. [8+8]
*********
co m
ld .
o r
t u w
w . jn
w w
Code.No: 34046
R05 SET-3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
II .B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
ELECTRICAL & ELECTRONICS ENGINEERING
(AERONAUTICAL ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---
1.a) What is the principle of operation used in attractive type and repulsive type of
Moving Iron Ammeter and Voltmeter?
b) Give the constructional details, working and deflecting torque of attractive type of
Moving Iron instrument. [8+8]
co m
2.a) Explain the operation of a PN- junction under forward and reverse bias condition
ld . [8+8]
jn
b) Draw the Lissajous figures if
f H fV = 1 4
i)
ii)
w .
f H fV = 2 1 [8+8]
w
5.a) What are the different types of elements used in electrical circuit? Explain the
6.a) Explain the differences between cumulative compound generator & differential
compound generator.
b) A 440 V DC compound generator has an armature; series field & shunt field
resistance of 0.5 Ω, 1.0 Ω and 200 Ω respectively. Calculate the generated voltage
while delivering 40 A to external load, with generator connected as long shunt
generator. [8+8]
7.a) What is the maximum efficiency of transformer? Obtain the condition for same.
b) Explain the differences between efficiency & regulation of transformer. Give the
related equations. For an ideal transformer what will be values of these quantities?
[8+8]
8.a) Explain various losses taking place in IM.
b) A 4-pole, 3-Φ, 50 Hz, IM supplies a useful torque of 160 Nm at 5% slip. Calculate:
rotor input, motor input, efficiency if friction & windage losses are 500 W and
stator losses are 1000 W. [6+10]
*********
co m
ld .
o r
t u w
w . jn
w w
Code.No: 34046
R05 SET-4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
II .B.TECH II SEM SUPPLEMENTARY EXAMINATIONS FEBRUARY - 2010
ELECTRICAL & ELECTRONICS ENGINEERING
(AERONAUTICAL ENGINEERING)
Time: 3hours Max.Marks:80
Answer any FIVE questions
All questions carry equal marks
---
co m
ii) f H fV = 2 1
ld . [8+8]
o
b) From the basic definitions obtain the expression for power & Energy. [8+8]
u w
4.a) Explain the differences between cumulative compound generator & differential
compound generator.
t
generator.
w . jn
b) A 440 V DC compound generator has an armature; series field & shunt field
resistance of 0.5 Ω, 1.0 Ω and 200 Ω respectively. Calculate the generated voltage
while delivering 40 A to external load, with generator connected as long shunt
[8+8]
w w
5.a) What is the maximum efficiency of transformer? Obtain the condition for same.
b) Explain the differences between efficiency & regulation of transformer. Give the
related equations. For an ideal transformer what will be values of these quantities?
[8+8]
7.a) What is the principle of operation used in attractive type and repulsive type of
Moving Iron Ammeter and Voltmeter?
b) Give the constructional details, working and deflecting torque of attractive type of
Moving Iron instrument. [8+8]
8.a) Explain the operation of a PN- junction under forward and reverse bias condition
with neat diagram.
b) Explain diode as a half-wave rectifier with circuit diagram and necessary
waveforms. [8+8]
*********
co m
ld .
o r
t u w
w . jn
w w