Professional Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK , SC . 29445 STYLE NUMBER: KRA5103WT
www . quoizel . com
H 6” Rod 2 pcs
D
I 12” Rod 2 pcs
E
J Ceiling Canopy 1 pc
F
M
K Socket Collar 3 pcs
L Steel Collar 3 pcs
G
M Shade 3 pcs
1 OF 5
PREPARATION STYLE NUMBER: KRA5103WT
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (3) 100W A19 medium base bulbs .
● Helpful Tools (not included): Wire strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a. Refer to the Bottom View, unfold the Support Arms to
proper locations.
Support Arm
Bottom View
Support Arm
2 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: KRA5103WT
STEP 2:
a. Determine the Rods to be assembled according to your
desired hanging height.
6” Rod
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Fixture 6” Rod
Assembly together as shown. Hand-tighten until snug.
12” Rod
12” Rod
Fixture Assembly
Upper Rod
3 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: KRA5103WT
Outlet Box
Outlet Box Screw
STEP 5:
Use Wire Connectors (not supplied) to connect the
WHITE OR RIBBED WHITE OR RIBBED
wires.
a. Connect the House Ground Wire to the Fixture Ground FROM HOUSE FROM FIXTURE
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side). BLACK (OR RED) WIRE BLACK OR SMOOTH
c. Connect the House Black (or Red) Wire to the Fixture FROM FIXTURE
FROM HOUSE
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the GROUND WIRE GROUND WIRE
Outlet Box.
FROM HOUSE FROM FIXTURE
STEP 6:
a. Place the Ceiling Canopy over the Mounting Screws
and secure with the Mounting Balls. Hand-tighten until Outlet Box
snug.
Mounting
Screw
Ceiling
Canopy
Mounting Ball
4 OF 5
INSTALLATION INSTRUCTIONS STYLE NUMBER: KRA5103WT
STEP 7:
a. Place the Shade and the Steel Collar over the Socket
as shown. Secure them by threading the Socket Collar
onto the Socket. Hand-tighten until snug.
Socket
Shade
Steel Collar
Socket Collar
STEP 8:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
5 OF 5