The experiment tested the corrosion rates of carbon steel, copper, and stainless steel by submerging samples of each metal in a saltwater solution for two weeks. As hypothesized, the carbon steel corroded the most with a weight loss of 6g, followed by copper which lost 2g. The stainless steel sample only lost 1g and showed no visible corrosion, demonstrating it had the lowest corrosion rate of the three metals tested.
The experiment tested the corrosion rates of carbon steel, copper, and stainless steel by submerging samples of each metal in a saltwater solution for two weeks. As hypothesized, the carbon steel corroded the most with a weight loss of 6g, followed by copper which lost 2g. The stainless steel sample only lost 1g and showed no visible corrosion, demonstrating it had the lowest corrosion rate of the three metals tested.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online from Scribd
The experiment tested the corrosion rates of carbon steel, copper, and stainless steel by submerging samples of each metal in a saltwater solution for two weeks. As hypothesized, the carbon steel corroded the most with a weight loss of 6g, followed by copper which lost 2g. The stainless steel sample only lost 1g and showed no visible corrosion, demonstrating it had the lowest corrosion rate of the three metals tested.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online from Scribd
The Experiment To test the Corrosion Rates of Different Metals was the experiment I was to complete. Aim:To test the corrosiveness of Stainless Steel, carbon Steel and Copper in a container with a solution of table salt dissolved in water over a period of 2 weeks in the same environment, weighing the objects before and after the experiment. Phase 1 Materials: carbon steel, copper and stainless steel will be used in this experiment The Hypothesis: the copper will rust will have the fastest corrosion rate followed by carbon steel and finally stainless steel which should not rust. Execution Place all objects into containers the same size and shape. Fill each container with salt water solution. In 2 weeks the experiment will be finished. Results At the start of the experiment: The carbon steel weighed 215 g The copper weighed 164 g The stainless steel weighed 157 g At the end of this experiment: Carbon steel weighed 209 g Copper weighed 162 g Stainless steel weighed 156 g Observations After 4 days Carbon steel and copper start to change colour. Stainless steel shows no change. After 8 days Carbon steel and copper continue to corrode Stainless steel is beginning to go a rusty colour at a hole in the top. Observations Conclusion From this experiment it is possible to conclude that the corrosion rate of carbon steel is higher than copper, but stainless steel has the least corrosion rate. Evaluation I would have made the objects the same weight and surface area, to ensure the testing was even more fair I would have gotten a more sensitive scale to more accurately measure