Professional Documents
Culture Documents
Out of Paper!: Build Your Own Oval Beetle
Out of Paper!: Build Your Own Oval Beetle
out of paper!
Simply print out the following pages onto a stiff paper, cut out the parts with scissors, then glue together! Below are some simple assembly instructions, use some white wood glue for fast results and a strong final model.
1. Start with the floorpan and fold in the 4 places 2. Cut out the sides and glue the running boards to the floorpan 3. Cut out and assemble the roof section 4. Next cut out the front windscreen and glue the upper edge to the roof section 5. Now glue the roof and windscreen onto the two sides 6. Assemble all four wings and glue the headlights and taillights onto them 7. Glue the front and rear valences to the floorpan and sides, remember to cut the bumper bracket slots. 8. Now glue the wings onto the sides 9. Fold the bumper brackets and carefully insert and glue into the valence slots 10. Next assemble and attach the front bonnet (hood) and rear decklid 11. Add the rear licence plate and licence plate light to the rear decklid 12. Make up the four wheels 13. Make up the two axles 14. Glue one wheel onto one end of the axle, then position through the sides under the wing and glue the wheel on the other side. Glue the axle to the floorpan and make sure the spacing is even on each side 15. Repeat for the other two wheels 16. Glue the over-riders onto the backs of the bumpers, then glue the bumpers to the brackets 17. Finally, assemble the two exhaust pipes and insert into the two holes in the rear valence.
www.pre67vw.co.uk
left side
right side
www.pre67vw.co.uk
floorpan
front wing
front headlights
front wing
www.pre67vw.co.uk
57 OVAL
decklid
front valence
rear valence
rear wing
roof
windscreen
front bumper
rear bumper
standard wheels
axles
rear tailpipes