You are on page 1of 1

Name:________________________ Student ID: __________________

Design Problem 1
The microprocessor is about to execute the following instruction:

2000 STA 2065

• Assume that the accumulator has a value of 4FH in it. Show the bus
timing diagram and identify the T-States, and Machine-Cycles needed.
(Draw on the paper sideways, there are lots of states).

• Assume that the microprocessor is operating at a frequency of 2 MHz,


calculate the amount of time needed to execute this instruction.

Microprocessors & Interfacing - Spring 1999 Dr. Bassel Soudan 1

You might also like