Professional Documents
Culture Documents
Motherboard Manual 7vm400m-Rz e
Motherboard Manual 7vm400m-Rz e
User's Manual
Rev. 1005 12ME-VM400MRZ-1005
Copyright
2005 GIGABYTE TECHNOLOGY CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein.
Motherboard 7VM400M-RZ
Feb. 20 ,2004
Feb. 20, 2004
English
Table of Contents
Chapter 1 Introduction ................................................................................................. 5
Features Summary ................................................................................................................. 5 7VM400M-RZ Motherboard Layout ........................................................................................ 6 Block Diagram ........................................................................................................................ 7 Hardware Installation Process ................................................................................................ 8 Step 1: Set System Jumper (JP1) .......................................................................................... 8 Step 2: Install the Central Processing Unit (CPU) ................................................................. 9
Step 2-1: CPU Installation ........................................................................................................... 9 Step 2-2: CPU Cooling Fan Installation ...................................................................................... 9
Step 3: Install Memory Modules ........................................................................................... 10 Step 4: Install AGP Card ....................................................................................................... 11 Step 5: Install I/O Peripherals Cabels .................................................................................. 11
Step 5-1: I/O Back Panel Introduction ....................................................................................... 11 Step 5-2: Connectors Introduction ............................................................................................. 12
7VM400M-RZ Motherboard
-4-
Chapter 1 Introduction
Features Summary
CPU Socket A for AMD Sempron / Athlon XP / Athlon / Duron processor 200/266/333MHz FSB Supports 1.4GHz and faster Northbridge : VIA KM400 Southbridge : VIA VT8235 / VT8237R 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports DDR333/DDR266/DDR200 DIMM Supports only 2.5V DDR SDRAM 1 AGP slot supports 8X/4X(1.5V) mode 3 PCI slots support 33MHz & PCI 2.2 compliant 2 IDE controller provide IDE HDD/CD-ROM(IDE1, IDE2) with PIO, Bus Master (Ultra DMA33/ATA66/ATA100/ATA133) operation modes Can connect up to 4 IDE devices 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytes 1 Parallel port supports Normal/EPP/ECP mode 1 Serial port (COMA), 1 VGA port, COMB on-board 6 USB 2.0/1.1 ports (2 x Rear, 4 x Front by cable) 1 Front Audio connector 1 PS/2 Keyboard 1 PS/2 Mouse Built-in VIA KM400 Builit-in VIA VT6103 chipset 1 RJ45 port VIA VT1617 Supports 2/4/6-channel Line Out / Line In / Mic In SPDIF Out CD In / Game connector Licensed AWARD BIOS Supports Q-Flash ITE8705 CPU/System fan revolution detect CPU/System temperature detect System voltage detect CPU/System fan fail warning Supports @BIOS Supports EasyTune Over clock (CPU/DDR) by BIOS Over voltage (DDR/AGP) br BIOS Micro ATX size form factor, 24.4cm x 22.3cm
English
Chipset Memory
-5-
Introduction
English
KB_MS
CPU_FAN
ATX FDD
COMA LPT
7VM400M-RZ
VGA
SOCKET A
VIA KM400
USB LAN
IT8705
IDE1
LINE_OUT
LINE_IN
MIC_IN
DDR1
DDR2
F_AUDIO
BIOS AGP
AGP 8X
PCI1
SYS_FAN CLR_CMOS
VT6103
JP1
PCI3 GAME
7VM400M-RZ Motherboard
-6-
IDE2
24.4 cm
Block Diagram
AMD-K7TM Host CPU AGP 4X/8X VGA Port CPUCLK+/- (100/133/166MHz)
English
200/266/333MHz DDR
AGPCLK 66MHz
RJ45
66MHz V_Link
3 PCI
VT6103
48 MHz
LPC BUS
24 MHz 6 Channel CODEC PCICLK (33MHz) 6 USB Ports ATA33/66/ 100/133 IDE Channels 33 MHz
2 COM Ports
PS/2 KB/Mouse
LINE-OUT
MIC LINE-IN
CLK GEN
-7-
Introduction
English
Step 2
Step 3
Step 5 Step 5
Step 4 Step 1
Short: 100MHz
1
Open: 133/166MHz
1
100MHz : Fix FSB 200MHz CPU 133/166MHz : Supports FSB 266/333MHz CPU If you want to use a CPU with 200MHz FSB, please set JP1 to 100MHz.
JP1
7VM400M-RZ Motherboard
-8-
English
Figure 2. Locate Pin 1 in the socket and look for a cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then move the socket lever to the locked position while holding pressure on the center of the CPU.
Figure 1. Apply the thermal tape(or grease) to provide better heat conduction between your CPU and cooling fan.
Figure 2. Fasten the cooling fan supporting-base onto the CPU socket on the motherboard.
Figure 3. Make sure the CPU fan is plugged to the CPU fan connector, than the install completely.
-9-
English
Notch
DDR
1. The DIMM socket has a notch, so the DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module. Reverse the installation steps when you wish to remove the DIMM module.
7VM400M-RZ Motherboard
- 10 -
English
3. Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/ uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot. Make sure your AGP card is locked by the small white-drawable bar.
VGA port
Monitor can be connected to VGA port.
LAN port
LAN is fast Ethernet with 10/100Mbps speed.
USB port
Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also make sure your OS supports USB controller. If your OS does not support USB controller, please contact OS vendor for possible patch or driver upgrade. For more information please contact your OS or device(s) vendors.
Line In jack
Devices like CD-ROM, walkman etc. can be connected to Line In jack.
- 11 -
English
MIC In jack
Microphone can be connect to MIC In jack. After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In" jack and connect "Center/Subwoofer" to "MIC In" jack.
3 15
11 9
16
10 12
13
14
1) 2) 3) 4) 5) 6) 7) 8)
7VM400M-RZ Motherboard
- 12 -
English
Pin No. 1 2 3 4 5 6 7 8
Definition 3.3V 3.3V GND VCC GND VCC GND Power Good
5V SB (stand by +5V)
Pin No. 11 12 13 14 15 16 17 18 19 20
Definition 3.3V -12V GND PS_ON(soft on/off) GND GND GND -5V VCC VCC
20
10
9 10
+12V
Pin No. 1 2 3
Pin No. 1 2 3
- 13 -
English
IDE1
IDE2
6) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.
Pin No. 1 2 3
7VM400M-RZ Motherboard
- 14 -
English
SPEAK+
1
Pin 1: LED anode(+) Pin 2: LED cathode(-) Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data(-)
RES (Reset Switch) PW (Power Switch) MSG (Message LED/ Power/ Sleep LED) NC
Open: Normal Operation Close: Reset Hardware System Open: Normal Operation Close: Power On/Off Pin 1: LED anode(+) Pin 2: LED cathode(-) NC
HD+ HDRESRES+ NC
Reset Switch
1 2
5 6 7 8 9 10
- 15 -
19 20
1 2
SPEAK-
MIC_BIAS Power Front Audio (R) Rear Audio (R) Reserved No Pin Front Audio (L) Rear Audio (L)
English
1 2 3 4 5 6
5 6
Pin No. 1 2 3 4
7VM400M-RZ Motherboard
- 16 -
English
2 3 4 5 6 7 8 9 10
Pin No. 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
15
Definition Power Power USB DxUSB DyUSB Dx+ USB Dy+ GND GND No Pin NC
1 2 3 4 5 6 7 8 9 10
- 17 -
English
Open: Normal
1
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you want to erase CMOS... 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery, wait for 30 seconds. 3. Re-install the battery. 4. Plug the power cord and turn ON the computer.
7VM400M-RZ Motherboard
- 18 -
English
ENTERING SETUP
Powering ON the computer and pressing <Del> immediately will allow you to enter Setup. If you require more advanced BIOS settings, please go to "Advanced BIOS" setting menu. To enter Advanced BIOS setting menu, press "Ctrl+F1" key on the BIOS screen.
CONTROL KEYS
< >< >< <Enter> <Esc> <+/PgUp> <-/PgDn> <F1> <F2> <F5> <F6> <F7> <F8> <F9> <F10> >< > Move to select item Select Item Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu Increase the numeric value or make changes Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Item Help Restore the previous CMOS value from CMOS, only for Option Page Setup Menu Load the file-safe default CMOS value from BIOS default table Load the Optimized Defaults Q-Flash utility System Information Save all the CMOS changes, only for Main Menu
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
: Select Item F10: Save & Exit Setup Time, Date, Hard Disk Type...
- 19 -
BIOS Setup
English
If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. Standard CMOS Features
This setup page includes all the items in standard compatible BIOS.
Integrated Peripherals
This setup page includes all onboard peripherals.
PnP/PCI Configuration
This setup page includes all the configurations of PCI & PnP ISA resources.
PC Health Status
This setup page is the System auto detect Temperature, voltage, fan, speed.
Frequency/Voltage Control
This setup page is control CPU clock and frequency ratio.
7VM400M-RZ Motherboard
- 20 -
English
Drive A Drive B Floppy 3 Mode Suport Halt On Base Memory Extended Memory Total Memory : Move Enter: Select F5: Previous Values
Date
The date format Week Month Day Year is <week>, <month>, <day>, <year>. The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1999 through 2098
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.
- 21 -
BIOS Setup
English
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25" 5.25 inch AT-type high-density drive; 1.2M byte capacity (3.5 inch when 3 Mode is Enabled). 720K, 3.5" 3.5 inch double-sided drive; 720K byte capacity 1.44M, 3.5" 3.5 inch double-sided drive; 1.44M byte capacity. 2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity.
Halt on
The category determines whether the computer will stop if an error is detected during power up. No Errors The system boot will not stop for any error that may be detected and you will be prompted. All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other errors. (Default value) All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors. All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all other errors.
Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system. The value of the base memory is typically 512K for systems with 512K memory installed on the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU's memory address map.
Total Memory
This item displays the memory size that used.
7VM400M-RZ Motherboard
- 22 -
English
Password Check
- 23 -
BIOS Setup
English
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals OnChip IDE Channel0 OnChip IDE Channel1 AC97 Audio VIA Onboard LAN USB 1.1 Controller USB 2.0 Controller USB Keyboard Support USB Mouse Support On-Chip LAN Boot ROM Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode Game Port Address Midi Port Address x Midi Port IRQ [Enabled] [Enabled] [Auto] [Enabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [SPP] [201] [Disabled] 10 Item Help Menu Level If a hard disk controller card is used, set at Disabled [Enabled] Enable onboard IDE channel [Disabled] Disable onboard IDE channel
AC97 Audio
Enabled Disabled Enabled Disabled Enable onboard AC'97 audio function. (Default value) Disable this function. Enable onboard LAN function. (Default value) Disable this function.
7VM400M-RZ Motherboard
English
- 25 -
BIOS Setup
English
Soft-off by PWR-BTTN
Instant-off Delay 4 Sec. Press power button then Power off instantly. (Default value) Press power button 4 sec to Power off. Enter suspend if button is pressed less than 4 sec. Always in Off state when AC back to the system. (Default value) Always power on the system when AC back. System power on depends on the status before AC lost. Disable this function. (Default value) Enter from 1 to 5 characters to set the keyboard power on password. If your keyboard has a "POWER Key" button, you can press the key to power on your system. Disabled this function. (Default value) Power on system by mouse event. - 26 -
AC BACK Function
Soft-Off Full-On Memory Disabled Password Keyboard 98
Keyboard Power On
Mouse Power On
Disabled Enabled 7VM400M-RZ Motherboard
English
ModemRingOn/WakeOnLan
An incoming call via modem or an input signal comes from the other client server on the LAN can awake the system from any suspend state. Disabled Disable Modem Ring on function. Enabled Enable Modem Ring on function. (Default value)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. Disabled Disable this function. (Default Value) Enabled Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Date (of Month) Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
KB Power ON Password
Enter Input password (from 1 to 5 characters) and press Enter to set the keyboard power on password.
PnP/PCI Configurations
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PnP/PCI Configurations PCI 1 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] Item Help Menu Level Device(s) using this INT: Display Cntrlr -Bus 1 Dev 0 Func 0
English
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Vcore 25VSTR +3.3V +12V Current System Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU FAN Fail Warning SYSTEM FAN Fail Warning OK OK OK O K 32 oC 45 oC 4687 RPM 0 RPM [Disabled] [Disabled] Item Help Menu Level
7VM400M-RZ Motherboard
- 28 -
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Frequency/Voltage Control Auto Detect PCI/DIMM Clk Spread Specturm CPU Host Clock Control x CPU Clock DRAM Clock(MHz) AGP OverVoltage Control DIMM OverVoltage Control [Enabled] [Enabled] [Disabled] 133MHz [By SPD] [Auto] [Auto] Item Help Menu Level
English
Incorrect using these features may cause your system broken. For power End-User use only!
Spread Spectrum
Disabled Enabled
CPU Clock
133MHz ~ 165MHz Set CPU Host Clock from 100MHz to 165MHz.
- 29 -
BIOS Setup
English
Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance.
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects.
7VM400M-RZ Motherboard
- 30 -
English
When you select this function, the following message will appear at the center of the screen to assist you in creating a password. Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password. To disable password, just press <Enter> when you are prompted to enter password. A message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely. The BIOS Setup program allows you to specify two separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS Setup program function. When enabled, the Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the User password is required to access only basic items. If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be prompted for the password every time the system is rebooted or any time you try to enter Setup Menu. If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only when you try to enter Setup.
- 31 -
BIOS Setup
English
Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS. Type "N" will return to Setup Utility.
Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility.
7VM400M-RZ Motherboard
- 32 -
English
The "Xpress Install" uses the"Click and Go" technology to install the drivers automatically. Just select the drivers you want then click the "GO" button. The will finish the installation for you automatically.
Massage: Some device drivers will restart your system automatically. After restarting your system the "Xpress Install" will continue to install other drivers.
- 33 -
Driver Installation
English
Item Description
VIA 4IN1 Driver For INF, AGP, IDE and DMA driver. VIA KM400 VGA Driver For KM400 drvier. USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP. VIA Lan Driver For VIA Phy family Lan driver. VIA AC97 Audio Driver Audio driver for VIA codec chipset. VIA USB 2.0 Controller For VIA VT8233 (VT6203) / VIA VT8235 / VIA VT8237 / VIA VT8237R south bridge.
For USB2.0 driver support under Windows XP operating system, please use Windows Service Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus controller" under "Device Manager". Please remove the question mark and restart the system (System will auto-detect the right USB2.0 driver).
7VM400M-RZ Motherboard
- 34 -
English
Contact Us
Taiwan (Headquarters) GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan. TEL: +886 (2) 8912-4888 FAX: +886 (2) 8912-4003 Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address (English): http://www.gigabyte.com.tw WEB address (Chinese): http://chinese.giga-byte.com U.S.A. G.B.T. INC. Address: 17358 Railroad St, City of Industry, CA 91748. TEL: +1 (626) 854-9338 FAX: +1 (626) 854-9339 Tech. Support : http://www.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.com Germany G.B.T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg Deutschland TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech.) FAX: +49-40-25492343 (Sales) +49-1803-428329 (Tech.) Tech. Support : http://de.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.de Japan NIPPON GIGA-BYTE CORPORATION WEB address : http://www.gigabyte.co.jp Singapore GIGA-BYTE SINGAPORE PTE. LTD. Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp U.K. G.B.T. TECH. CO., LTD. Address: GUnit 13 Avant Business Centre 3 Third Avenue, Denbigh West Bletchley Milton Keynes, MK1 1DR, UK, England TEL: +44-1908-362700 FAX: +44-1908-362709 Tech. Support : http://uk.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://uk.giga-byte.com The Netherlands GIGA-BYTE TECHNOLOGY B.V. TEL: +31 40 290 2088 NL Tech.Support: 0900-GIGABYTE (0900-44422983) BE Tech.Support: 0900-84034 FAX: +31 40 290 2089 Tech. Support : http://nz.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.nl
- 35 -
Driver Installation
China NINGBO G.B.T. TECH. TRADING CO., LTD. Tech. Support : http://cn.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.com.cn Shanghai TEL: +86-021-63410999 FAX: +86-021-63410100 Beijing TEL: +86-010-82886651 FAX: +86-010-82888013 Wuhan TEL: +86-027-87851061 FAX: +86-027-87851330 GuangZhou TEL: +86-020-87586074 FAX: +86-020-85517843 Chengdu TEL: +86-028-85236930 FAX: +86-028-85256822 Xian TEL: +86-029-85531943 FAX: +86-029-85539821 Shenyang TEL: +86-024-23960918 FAX: +86-024-23960918-809
Australia GIGABYTE TECHNOLOGY PTY. LTD. Tech. Support : http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.giga-byte.com.au France GIGABYTE TECHNOLOGY FRANCES S.A.R.L. Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.fr Russia Moscow Representative Office Of Giga-Byte Technology Co., Ltd. Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.ru Poland Representative Office Of Giga-Byte Technology Co., Ltd. POLAND Tech. Support : http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.pl
English
7VM400M-RZ Motherboard
- 36 -