Professional Documents
Culture Documents
If you cant find this icon, but you can see an icon looking a bit similar, you probably have software from a third party managing your wireless network connections. This manual however will only describe how to configure things in Windows. If you choose to follow this manual, make sure to disable or uninstall any third party software for managing wireless connections before you proceed. Note: this manual is made with the standard Windows Firewall switched on. 1. Open Network Connections from the Control Panel.
3. Select eduroam form the list, and click on Change the order of preferred networks.
4. Open the Wireless Networks tab and click Add. Make sure that: Use Windows to configure my wireless network settings is enabled.
5. Fill in the Network name (SSID): eduroam. Fill in the Network Authentication: WPA2 and the Data encryption: AES. Open the Authentication tab.
6. Enable the option: Enable IEEE 802.1x authentication for this network and select Protected EAP (PEAP). Disable: Authenticate as computer when computer information is available . Click on Properties.
7. In the following screen, enable Connect to these servers and enter the following server address: radius.tudelft.nl;radius2.tudelft.nl. Leave all the other settings as they are. Then click on Configure..
radius.tudelft.nl;radius2.tudelft.nl
9. Close all the tabs by pressing OK. In your system tray a balloon will appear. Click on this balloon:
10. Type in your NetID username followed by @tudelft.nl and fill in your NetID password:
11. Click on the second balloon that appears in your system tray:
13. After a succesful authentication you will be connected. You can check your connection at the wireless network list for your wireless network connection.