Professional Documents
Culture Documents
PDP TV Visual Troubleshooting Guide Book
PDP TV Visual Troubleshooting Guide Book
No Power
LED Off
No Raster
LED Green Red
[ p.1 ]
[ p.2 ]
[ p.3 ]
[ p.4 ]
[ p.4 ]
Reddish
[ p.5 ]
[ p.5 ]
[ p.6 ]
[ p.7 ]
[ p.8 ]
Screen Distortion
Screen Distortion
Mosaic
[ p.9 ]
[ p.9 ]
[ p.10 ]
[ p.10 ]
[ p.8 ]
Screen Distortion
Screen Smear
Flicker
Flicker
[ p.12 ]
[ p.12 ]
[ p.14 ]
[ p.15 ]
[ p.16]
Flicker
Flicker
Flicker
Flicker
[ p.18 ]
[ p.18 ]
[ p.19 ]
[ p.20 ]
[ P.17]
No Raster
[ P.13 ]
Check the Power Supplying status and Main Power S/W ON Check EMI Board Fuse
Fuse should be 15A
No Power No Power
Check
PSU
Fuse 15 A
[1]
Check
Module
: ALL : Check 10 register in front of COF IC : Black ADD BAR width 2~3 cm : Replace Module
[4]
Check
Film Connector
: ALL : Check Film connector between X-B/D and Control B/D : ADD Bar width 5~6 cm(specific color, magenta, cyan, yellow) : Replace Film Connector
[6]
Check
Module
Broken Film
: : : :
ALL Check Film connector between X-B/D and Control B/D Black ADD Bar Replace Module
[7]
Flicker Flicker
Check
Flicker
: M(X)-42PZ90 : Check the Control B/D and Micom Version : Flicker : Replace the Module control B/D
[ 15 ]
Flicker Flicker
Check
Y-B/D
Flicker
: M(X)-42PZ90 : Check the 15V Line falls to (8~9V) supplied to the module control B/D : No picture with Mal discharge : Replace the Y-B/D & Z-B/D
[ 20 ]
Dark Screen & Mal Discharge Dark Screen & Mal Discharge
Check
Z-B/D
: : : :
M(X)-42PZ90 Check the Cable or B+ port of Z-B/D Dark Screen and Heavy Noise Check the Z-B/D and Cable
[ 23 ]
Dont waste anymore time on searching the internet for the magic solution. Learn how to repair plasma tv and perform plasma tv repair like a professional right now!
http://www.Plasma-Television-Repair.com