This document provides specifications for a hammer-type pulverizer to be used for minimizing garbage size. It should be tractor-mounted with a capacity of 50-60 HP, include 40 hammers and 2 blades to pulverize garbage into pieces no larger than 6 inches in diameter. The pulverizer must be capable of processing materials like banana trunks and coconut leaves. It must have a variable-speed conveyor with an output of 5-8 cubic meters per hour and dimensions not exceeding 3.5m in length, 1.5m in width and 2m in height. The supplier must provide training to municipal operators and service support through local centers to address issues promptly.
This document provides specifications for a hammer-type pulverizer to be used for minimizing garbage size. It should be tractor-mounted with a capacity of 50-60 HP, include 40 hammers and 2 blades to pulverize garbage into pieces no larger than 6 inches in diameter. The pulverizer must be capable of processing materials like banana trunks and coconut leaves. It must have a variable-speed conveyor with an output of 5-8 cubic meters per hour and dimensions not exceeding 3.5m in length, 1.5m in width and 2m in height. The supplier must provide training to municipal operators and service support through local centers to address issues promptly.
This document provides specifications for a hammer-type pulverizer to be used for minimizing garbage size. It should be tractor-mounted with a capacity of 50-60 HP, include 40 hammers and 2 blades to pulverize garbage into pieces no larger than 6 inches in diameter. The pulverizer must be capable of processing materials like banana trunks and coconut leaves. It must have a variable-speed conveyor with an output of 5-8 cubic meters per hour and dimensions not exceeding 3.5m in length, 1.5m in width and 2m in height. The supplier must provide training to municipal operators and service support through local centers to address issues promptly.
No. 1 Suitability Suitable for minimizing the size of Garbage using chopping hammer and pulverizing blades 2 Technical Specification Supply of Tractor mounted pulverizer of capacity of 50 HP to 60 HP with 40 nos. of hammers and 2 nos. of blades & counter blade to make the size of Garbage not more then 6” dia including the facility of Variable speed conveyor with an output of 5-8 cu.m./hr. The length, width, height should not exceed more than 3.5 m, 1.5m and 2 m respectively. The machine must be capable of shredding banana trunk, coconut tree leafs and other bio-degradable waste. 3 Usage of Solid waste Plays major role in compost yard Management 4 DGS & D priced vehicle Not available 5 Service Center Should be enable to complete the fault and repairs immediately in the local centers. The Urban Local Bodies staff who is allotted to operate this machine may be trained up to rectify the fault then and there. 6 Response time for service The supplier should provide AMC details for the machine supplied by them 7 Annual O&M Cost The comparative statement should be prepared on cost per tonne per hour basis 8 Taxes The Entry tax and other tax should be included in basic cast of machine to calculate O&M 9 Training The supplier should give training to the operators recommended by Municipality
http://sikailash.wordpress.com Mail to:-kailasasundaram@gmail.com