Professional Documents
Culture Documents
Instructions
Launching BTS Site Manager
Purpose
You can launch BTS Site Manager in a connected mode, in create commissioning file mode, or in snapshot mode.
Before you start
Before you connect to the Flexi WCDMA BTS site, make sure the following conditions are fulfilled: If you want to establish a connection to the BTS site locally, connect the PC to the LMP port on the Flexi System Module (FSM) using 10baseT Ethernet cable with RJ-45 connector. In a remote connection, the connection is established via DCN network. If the PC is connected to the FSM LMP port, specify your PC's network settings to match the following settings: IP address: 192.168.255.130 and Subnet mask: 255.255.0.0.
Steps
Related information
Id:0900d8058055600c