You are on page 1of 3

Name of Candidate

Jan 2012 TEE

Enrolment no. College Code Sign. Of Candidate Sign of Invigilator

CAT

Location

ATDC-IGNOU Community College


7. Sewing Techniques Set-I
Certificate APMC PQC AEM KMT(Found) Sem-I

Diploma AMTD FDTD APMD AQAD KMTD

Sem-I

Sem-II

Associate Degree AMA FDA

Sem-I

Sem-II

Sem-III

Sem-IV

Note: Objective question to be attempted in this sheet only M.M. 50 Time : 3Hrs Part -A (Theory) Q .1 Identify and give the name of skirt terminology (1Mark X5) =5Marks

1. ____________________________________ 2._____________________________________ 3._____________________________________ 4______________________________________ 5. _____________________________________


1

2 3

Q .2 Match the following:1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Pin tucks Needle Dart On grain Facing Edge Neatening seam SPI French Seam DDL -8300N Presser Foot 1

(1/2Mark X5)=5Marks a. Parallel to selvedge b. SNLS Machine c. Short Groove d. Class - 6 e. Stitch per inch f. Class -1 g. Decorative seam h. Used in fitted garments i. Holds Fabric j. Neckline finishing

Q . 3 Draw the symbols :1. Bound seam 2. Lapped seam 3. Pin Tucks 4. Off Grain 5. Piped seam Part -B (Practical) Q .4 Make the Samples ( Any Two) :-

(1 MarkX5) = 5 Marks

(10MarkX2) =20 Marks

5 8

4 1/4

1. Square Sleeve Placket

1/8 6

2. Side Pocket (slant)


8

4.5

3. Square Neck with shaped facing

Q .4 Make seam mock ups of 8x8Fabrics( Any Three) :-

(5MarkX3) =15 Marks

1. French seam 2. Pipe seam 3. Lap - Felled seam 4. Pin tucks (1 spacing)

You might also like