Professional Documents
Culture Documents
Me Theory Exam Time-Table May-2012
Me Theory Exam Time-Table May-2012
(All Branches) Examinations, May, 2012 1. Candidates are required to be present at their respective places of the Examinations fifteen minutes before the time for paper. 2. Candidates are forbidden to take any material into the Examination Hall, with a view to prevent malpractices at the time of examinations. 3. Candidates are requested to see the Notice-Board at their respective places of examination regularly, for changes if any notified later, in the programme. 4. Candidates are requested to note the date, day, time and place of every paper on every day. 5. Candidates are permitted to use stencils at the time of examinations. 6. Candidates for the examination are expected to provide themselves with slide-rules. 7. The exchange or loan of slide-rules, drawing instruments or other materials used in the examination, is not permitted while the examination is in progress. Candidates must bring their own instruments and will not be allowed to borrow from each other under any circumstances. 8. The Term Work Assessment will be held at the respective Engineering College. 9. Use of non-programmble, battery operated Electronic Calculator of pocketsize is allowed. The Exchange of Calculator is not allowed. 10.No request for any special concession, such as change in time or day fixed for the University Examination on religious or any other ground, shall be granted. 11.University reserves right to make timely changes in examination time-table in an eventuality of a sudden announcement / declaration of a holiday by the Govt. and / or holding of MPSC / UPSC Competitive examinations by the Government. 12. Centre for the Examination will be as under Sr. No. College & Course 1. SSTS, College of Engineering, Bambhori 2. Govt. College of Engineering, Jalgaon 3. SGD.College of Engineering, Jalgaon 4. Raisoni.College of Engineering, Jalgaon 5. Godavari College of Engineering,Jalgaon 6. SSGB College of Engineering, Bhusawal 7. JTM College of Engineering, Faizpur 8. SSVPS, College of Engineering, Dhule 9. D.N.Patel College of Engineering,Shahada 10. RCP, College of Engineering, Shirpur The written examinations will be conducted in the following order TIME - TABLE Subject & Time 10.00 am. to 01.00 pm. Day & Date Wednesday 16.05.2012 SEM : I M. E. (Civil ) Building Science & Technology Elective-I 1. Operation Research 2. Environmental Risk Assessment and Hazard Management 3. Work Study and Incentive Management Elective-I 1. Environmental Sanitation 2. Remote Sensing, GIS and its Environmental Application 3. Rural Water Supply & Sanitation Elective-I 1. Advance Construction Technology - I 2. Infrastructure Development 3. Repairs, Rehabilitation, Retrofitting of Structure 4. Building Environment & Services Elective-I 1.Highway Projects Planning Designing & Economic Evaluation 2. Retrofitting and Rehabilitation of Structures 3.Ports & Harbor Structures. Centre SSTS, College of Engineering, Bambhori Govt. College of Engineering, Jalgaon SGD, College of Engineering, Jalgaon Raisoni.College of Engineering, Jalgaon Godavari College of Engineering, Jalgaon SSGB,College of Engineering, Bhusawal JTM College of Engineering, Faizpur SSVPS, College of Engineering, Dhule D.N.Patel College of Engineering,Shahada RCP, College of Engineering, Shirpur
M.E.(All Branches) Examinations May,2012 Day & Date Wednesday 16.05.2012 Subject & Time 10.00 am. to 01.00 pm. M. E. (Mechanical) Machine Design/ Design Engg. Elective-I 1. Instrumentation & Automatic Control System 2. Design of Pressure Vessel 3. Design of Material Handing Equipment Elective-I 1.Adavance Machine Design. 2.Measurement Techniques & Data Analysis 3.Internal Combustion Engine. 4.Analysis & Synthesis of Machanisms 5.Computer Aided Manufacturing 6. Theory of Elasticity & Plasticity. Elective-I 1.Design of Pressure Vessel. 2.Computer Aided Engineering. Elective-I 1. Embedded Software Design 2. Digital Image & Video Processing 3. Mathematical Foundations of Computer Science 4. Software Project Management Elective-I 1. Advanced Digital Signal Processing. 2. Computer Networks & Management. 3.Artificial Neural Networks & Fuzzy Systems 4. Wireless Communication System. Elective-I 1. Parallel Computing 2. Biomedical Instrumentation 3. Wireless & Mobile Communication Elective-I 1. Image Processing & Computer Vision 2. Advanced Computer Architecture 3.Artificial Intelligence & Neural Networks
M. E. (Mechanical) ( General)
M. E. (Mechanical) ( Computer Aided Analysis & Design ) M. E. ( Computer Science & Engineering )
Elective-I 1. Modeling and Simulation. 2. Advanced Telecomm. Network Management 3. Linear System Theory 4. Optimization Technique 5. Random Processes
M.E.(All Branches) Examinations May,2012 Day & Date Friday 18.05.2012 Subject & Time 10.00 am. to 01.00 pm. SEM : I M. E. (Civil ) Building Science *Advance Design of Concrete Structures & Technology *( Time : 10.00 am to 02.00 pm) M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M.E.(Mechanical)Machine Design/Design Engg. M. E. (Mechanical) (Computer Aided Analysis & Design ) M. E. ( Computer Science & Engineering ) M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) ( Digital Systems) M. E. ( Electronics & Tele. / Electronics & Communication ) (Communication Engg.) M.E.(Mechanical) ( General ) M. E. (Civil ) Infrastructure Engineering & Management M. E. ( E&T.C) VLSI & Embedded System Design. SEM : I Monday 21.05.2012 M. E. (Civil ) Building Science & Technology M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M. E. (Mechanical) Machine Design/ Design Engg. M. E. ( Computer Science & Engineering ) M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) ( Digital Systems) M. E. ( Electronics & Tele. / Electronics & Communication ) (Communication Engg.) M.E.(Mechanical) ( General ) M.E.(Mechanical) ( Computer Aided Analysis & Design ) M. E. (Civil ) Infrastructure Engineering & Management M. E.( E & T.C) VLSI & Embedded System Design.) Contracts & Valuations Design, Operation and Maintenance of Water Supply and Sewerage Systems Construction Cost & Quality Management Air Pollution Construction Safety Tribology Tribology (Elective- I )
Applied Algorithms
Advanced Heat Transfer Construction Planning Scheduling & Management Microprocessor & Microcontroller Interfacing.
Vibration Engineering Net Centric Computing Digital System Design Embedded Systems
M.E.(All Branches) Examinations May,2012 Day & Date Wednesday 23.05.2012 Subject & Time 10.00 am. to 01.00 pm. SEM : I M. E. (Civil ) Building Science Construction & Project Management & Technology M. E. (Civil ) Environmental Environmental Engineering Chemistry Engineering M. E. (Civil ) Construction Tech. & New Construction Materials & Techniques Management) M. E. (Mechanical) Machine Computer Methods in Mechanical Design Design/ Design Engg. M. E. ( Computer Science & Distributed Systems Engineering ) M. E. ( Electronics & Advanced Digital Signal Processing Telecommunication ) (Digital Electronics) M. E. ( Electronics & Signal Processing & Applications Telecommunication ) ( Digital Systems) M. E. ( Electronics & Tele. / Advance VLSI Design Electronics & Communication) ( Communication Engg.) M.E.(Mechanical) ( Computer Aided Analysis & Design ) M.E.(Mechanical) ( General ) M. E. (Civil ) Infrastructure Engineering & Management M. E.( E & T.C) VLSI & Embedded System Design. SEM : I Friday 25.05.2012 M. E. (Civil ) Building Science & Technology M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M. E. (Mechanical) Machine Design/ Design Engg. M. E. ( Computer Science & Engineering ) M. E. ( Electronics & Telecommunication ) ( Digital Electronics) M. E. ( Electronics & Telecommunication ) ( Digital Systems) M. E. (Electronics & Tele. / Electronics & Communication) ( Communication Engg.) M.E.(Mechanical) General M.E.(Mechanical) ( Computer Aided Analysis &Design ) M. E. (Civil ) Infrastructure Engineering & Management M. E.( E & T.C) VLSI & Embedded System Design Saturday 26.05.2012 M.E.(Mechanical) ( Computer Aided Analysis &Design ) Building Environment & Services Environmental Engineering Microbiology Management & Project Planning in Construction Advanced Mechanical Engineering Design of Equipment Advanced Software Engineering Advanced Instrumentation System Digital Integrated Circuits & Systems Mechanical Vibration.
Finite Element Analysis. Finite Element Analysis Irrigation Water Distribution Systems. VLSI.Testing & Verification. Machine Design (Sem-I)
M.E.(Mechanical) ( Computer Aided Analysis & Design ) M. E. ( Computer Science & Engineering )
M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) (Digital Systems) M. E. ( Electronics & Tele. / Electronics / Communication ) ( Communication Engg.)
Wednesday 30.05.2012
M.E.(All Branches) Examinations May,2012 SEM : II Friday 01.06.2012 M. E. (Civil ) Building Science & Technology M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M. E. (Civil ) Infrastructure Engineering & Management M. E. (Mechanical) Machine Design M.E.(Mechanical) General M. E. ( Computer Science & Engineering ) M. E.( E & T.C) VLSI & Embedded System Design M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) (Digital Systems) M. E. ( Electronics & Tele./ Electronics & Communication ) ( Communication Engg.) SEM : II Monday 04.06.2012 M. E. (Civil ) Building Science & Technology M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M. E. (Civil ) Infrastructure Engineering & Management M.E.(Mechanical) General M.E.(Mechanical) ( Computer Aided Analysis & Design ) M. E. ( Computer Science & Engineering ) M. E.( E & T.C) VLSI & Embedded System Design M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) (Digital Systems) M. E. ( Electronics & Tele./ Electronics & Communication ) ( Communication Engg.) *Earthquake Resistant Design of Buildings *( Time : 10.00 am to 02.00 pm) Industrial Water and Waste Water Management Construction Economics & Finance Advance Concret Technology Construction Techniques and Equipments
Watershed Management Advanced Construction Equipments Enviournment & Energy Management. Machatronic Product Design Advanced Fluid Mechanics Soft Computing Nano Electronics Advanced Computer Network Operating System
Parallel Computing
Mobile Communication
M.E.(All Branches) Examinations May,2012 SEM : II Wednesday 06.06.2012 M. E. (Civil ) Building Science & Technology M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M. E. (Civil ) Infrastructure Engineering & Management M. E. (Mechanical) Machine Design ) M.E.(Mechanical) General M.E.(Mechanical) ( Computer Aided Analysis &Design ) M. E. ( Computer Science & Engineering ) M. E.( E & T.C) VLSI & Embedded System Design M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) (Digital Systems) M. E. ( Electronics & Tele. / Electronics & Communication) ( Communication Engg.) M.E.(Mechanical) ( Computer Aided Analysis& Design) M. E. (Mechanical) Machine Design ) SEM : II Monday 11.06.2012 M. E. (Civil ) Building Science & Technology M. E. (Civil ) Environmental Engineering M. E. (Civil ) Construction Tech. & Management M. E. (Civil ) Infrastructure Engineering & Management M.E.(Mechanical) General M.E.(Mechanical) ( Computer Aided Analysis &Design ) M. E. ( Computer Science & Engineering ) M. E.( E & T.C) VLSI & Embedded System Design M. E. ( Electronics & Telecommunication ) (Digital Electronics) M. E. ( Electronics & Telecommunication ) (Digital Systems) M. E. (Electronics & Tele. / Electronics & Communication) ( Communication Engg.) *Please Note the Timing Post Box No. 80, Jalgaon 425 001, NMU / M.E../ 7B /1936/ 2012 Date : 17/04 / 2012 Offg. Dr. A.U. Borse Controller of Examinations Construction Cost Dynamics Advanced Water Treatment Technology Resource Management Construction Methods & Equipment Management Optimization Techniques Optimization Techniques Advanced Database Management Systems Real Time Operating System Image Processing & Pattern Recognition Low Cost Housing
Optimization Techniques in Design Instrumentation & Automatic Control System Dynamics & Simulation Web Engineering Embeded Networking & Wireless Sensor Network Embedded System Design. Digital Communication Systems
Friday 08.06.2012
Design & Synthesis of Mechanism ( Sem.II) Design & Synthesis of Mechanism (Sem.II)