You are on page 1of 5

FREQUENCY BASED ISLANDING SCHEME FOR ETPS

PRESENTED BY

S.BALAMURUGAN S.JAGADESH S.SRIDHAR


GUIDED BY

INTERNAL GUIDE:
MR.G.ARUNSANKAR,M.E.,M.B.A., HOD/EEE G.S.B.T

EXTERNAL GUIDE:
MR.B.MANOHAR,B.E(EEE) ASSTIANT EXECUTIVE ENGINEER ETPS

OBJECTIVE
In the conventional or existing scheme when the system frequency falls below the set frequency, the under-frequency relay provides a trip signal to the circuit breaker. Our project is aimed at replacing this relay with a frequency transducer and also automating the system using fuzzy logic and computers. Self generating power, power import from grid, consumption of generating station, load at each feeder and frequency are connected to the computer through suitable transducers. This PC based system runs continuously even when the grid collapses by safe islanding.

Simulation of Islanding Existing System

Simulation of Computer Based Islanding System

CONCLUSION
In the present system many of the times grid fault occurs leads to Over Islanding or Under Islanding or Un-Successful Islanding. After implementing the computer based islanding scheme if grid fault occurs definitely it leads to perfect islanding and frequency after islanding will be in the range of desired frequency.Pc based islanding will provide a better solution to the power generating stations to run continuously even when grid collapses by safe islanding and thereby feeding the base load with a required optimum frequency and the vital areas will be fed power continuously without interruption.

You might also like