Professional Documents
Culture Documents
Belt Conveyor Pulleys
Belt Conveyor Pulleys
and custom specifications in their Thetford Mines plant since 1963. The fully equipped, modern fabricating and machining facilities lend themselves well to the production of high quality, precision engineered products to serve the bulk material handling requirements of today's indus-
try.
This catalogue is designed to aid the conveyor pulley user in selecting the proper pulley for their particular application while at the same time allowing the flexibility of the hub system
The pulleys described herein are those meeting standard specifications. They are by no means a limit to Continental's abilities in the engineered class applications as custom pulleys are designed and fabricated to meet customers individual requirements whenever necessary.
VIEWS
BELOW
SHOW
MANUFACTURING
AND ASSEMBLY
AREA
Above are several views of the manufacturing process of a crowned faced pulley. Initially, the steel rim is rolled to a concentric circle in crown facing rolls specially constructed for the production of conveyor pulleys. Following this operation, end discs are precision flame cut on a specially constructed cutting machine. To assure perfect concentricity, the hub is first mounted in the end disc where upon the entire assembly is then cut to the required diameter. This process assures a negligeable deviation in diameter and thus a more concentric conveyor pulley. Large intermediate and center discs are used on all conveyor pulleys with the exception of those having small diameters and face widths.These
discs are welded to the interior of the rim. Following this operation, the end discs are mounted using a shaft with a continual keyway to assure perfect aligment of the bushing keyways. The entire assembly is then hydraulically drawn together and welded to form a concentric drum. In the final welding operation, the pulley is placed on a special machine that turns the pulley at a precise speed, depending on the diameter, to ensure a perfect, high penetration weld between end disc and rim. The pulley is then meticulously checked and verified to CEMA specifications prior to shipping to ensure complete customer satisfaction.
Continental welded steel conveyor pulleys are availa~ ble with CXTB, DODGE "taper lock" or O.D. hubs.
DETAILS BELOW SHOW DIFFERENCES HUB SYSTEM. IN CONSTRUCTION DEPENDING ON
Q. D. BUSHING
Split cast iron type with 3/4" taper per foot. Shaft keyed to bushing, bushing not keyed to pulley hub, torque transmitted through self locking taper.
CONTINENTAL CXTHHUBS
CXTB BUSHING
Split taper of either malleable or cast iron type, 2" taper per foot. Shaft keyed to bushing, bushing not keyed to pulley hub. Torque transmitted through bolts.
CONTINENTAL DODGEHUBS
~
CK-25 NO. UB
BUSHIN~ NO.
p
I
R* 1/8" 3/8"
1-1/8" 1-1/2" 1-7/8" 2-1/4" 2-5/8" 2-5/8" 2-5/8"
DODGE
"TAPER
LOCK"
25'i7
CK-30 CK-35 CK-40 CK-45 CK.50 CK-60 CK-70 CK-80 CK-l00
.Minimum
1/2" to 2.1/2" dia. 7/S" to 3" dia. 1.3/16" to 3.1/2" dia. 1.7/16" to 4" dia. 1.15/16" to 4.1/2" dia. 2.7/16" to 5" dia. 3.7/16" to 6" dia. 3-15/16" to 7" dia. 4.7/16"toS"dia. 7" to 1 0" dia.
.~BORE~ ~~NG~
1" 1" 1" 1" 1" 1" 2-1/4" 2-1/4" 2-1/4" 2-1/4"
1-3/4':
Z"
3-1/Z" 4"
4-1/Z"
5"
Split taper cast iron bushing 80 taper per foot. Shaft keyed to bushing, bushing not keyed to pulley hub. Torque transmitted through bolts.
5"
6" 6-1/Z"
8-1/Z"
puller required.
conveyor
with
The 2" per foot taper of the CXT provide a 12 to 1 locking ratio on the shaft. The advantages of the CXT system are its high lateral holding power and its minimuzation of end disc prestressing. Most torque however is transmitted through the bushing flange and cap screws.
,.-
c ~
~~
-juL
BUSHING AND KEYSEAT DIMENSIONS
.Key
furnished
BUSHING SPECIFICATIONS
HUBAND CORRESPONDING BUSHING HUB CXTH25 CXTH30 CXTH35 CXTH40 CXTH45 BUSHING CXTB25 CXTB30 CXTB35 CXTB40 CXTB45 HUB CXTH50 CXTH60 CXTH70 CXTH80 CXTH10G
BUSHING i
i
in. Ibs.
350 550 840 1200 1680
CXTH25
CXTH30 CXTH35 CXTH40 CXTH45
~lY
,J [~~
5
steel conveyor
pulleys
with a.D.
The 3/4" per foot taper of the 0.0. provides a 32 to 1 locking ratio on the shaft. The advantages of the 0.0. system are its superior holding power in both lateral and torsional directions, its ease of assembly and disassembly and its self locking taper. The large CJp screws provide enough force to lock the taper so that no external keys are required between mating sections.
~ulBUSHINGAND KEYSEATDIMENSIONS
BUSHING SPECIFICATIONS
in. Ibs.
15
In. IDS.
300 450 600 750
60
75 135 225
CHJ
CHM
,-
The 1-1/2" per foot taper of the "taper lock" provides a 16 to 1 locking ratio on the shaft. The advantages of the Dodge system are its availability, its superior torsional holding power when using a key and its greater load rating due to the small inset that is required.
"
.Key
BUSHING SPECIFICATIONS
HUBANDCORRESPONDING BUSHING
HUBBOLTTOROUE HUB
~
CK
CK CK CK
HUB CK 50 CK 60
CK 70 CK 80 CK 100
ft. Ibs.
25 30 35 40 45
258
652 652 652 1142 )./
~ L~
APPROXIMATE
PUllEY' DIA.
10
WEIGHTS
n.D.
HUB-- 12 tHK 47 51 60 51 61 69 14 64
68 77 82 i 75 79 88 94
IN POUNDS
20 61 65 74
74 78 86 91 83 87 96
101 i
Continental
HUB
CXTH25
CXTH 30
CXTH35 CXTH25 CXTH30 CXTH35 CXTH40 CXTH25 CXTH30 CXTH35 CXTH40 CXTH25 CXTH30 CXTH35 CXTH40 CXTH25 CXTH30 CXTH35 CXTH40 CXTH25 CXTH30 CXTH35 CXTH40 CXTH50 CXTH25 CXTH30 CXTH35 CXTH40 CXTH50 CXTH60 CXTH25 CXTH30 CXTH35 CXTH40 CXTH50 CXTH60 CXTH35 CXTH40 CXTH50 CXTH60 CXTH70 CXTH80 CXTH40 CXTH50 CXTH60 CXTH70 CXTH80 CXTH50 CXTH60 CXTH70 CXTH80
12
14
16
. . . .
tHE tHE tHF tHK tHE tHF
14 50 54 63 62 66 14 18
69 73 82 87 80 84 93 99 106 110 119 124
1& 18 53 57 6& 66 10 18 83 57 61 70
70 74 82 87 78 82 91 96 91 95 104 110 122 126 135 140
22 65 69 78 78 82 90 95
24 68 721 81
82 86 94 99
44
T32 136 145
46
139 143 158
51
54 158
60
63
66
88
90 94 103 107
85 89 98 103 101 116 120 123 121 135 181 144 148 157 162
95 102 108
121 131 135 146 150 159 163 175 179 187 207
~
155 165 5i.
162 172
CHK
157 168
161 170 174 188 192 200 220 172 181 185
199 207
i..
78 I 87 92 86 90
127
130 174
216 232 242 252 238 254 264 274 239 243 251 261
270 274 282 286 306 316 324 328 349 385 389 401 404 485 531 726 732 738 742 76\1 806
CHK
97
101
tHE tHF
CHK
18
99
105 114 118 127 132 131 135 144 149 170
155 161 159 165 165 174 173.179 212 216 225 229 245 249 258 262 283
302 306 316 320 340 386 484 488 504 508 521 567 221 225 234 238 254 260 267 271 292
258 262 270 280 290 294 302 306 329 339 347 351 372
412 416 428 431 519 565'
269 273 281 291 303 307 315 319 342 352 360 364 385
295 306
326 330 338 347 369 381 384 388 417 427 437 440 461
523 541 544 651 747 793
20
24
30
. . . .
142 150I
151 159 156 164 1
lBB 196 192 200 201 209 205 213 217, 226 221 230 230 239 234 243 255 264 270 274 284 288 308 354 433 437 453 457 465 511
281 285 295 299 319 365 450 454 470 474 487 533
140
144
149 158 153 162 162 171 167 176 188 197 188 198 192 202 199 210 204 215 225 236 271 282
1681 199 172 203 182 212 186 216 207 237
167 111 181 188 193 214 260 263 261 283 308 343 389
387 464 485 531 646 828
209 249 213 253 220 262 225 266 246 286 292 332 399 403 419 423 436 482
313 317 327 331 351 397 500 504 520 524 537 583
328
338 342 416 462 527 532 537 541 554 600
428 443 459 1 432 447, 477 4151 4931 445 4611 480 496; 448 464 580 600 540 560: 676 696 586 6061 722 142
!
CHK
280 297 314 284 301 318 3001 317 324 325 342 359 360 371 379 406 417! 425
407 488 509 555 670 952
m
783 789 793 811 851 950 1040 1058 1100 1202 1484 1303 1311 1353 1456 1928 2082 2084 2178 2276
841
887
892 983 8791 910 1001 849 8831 914 1005 853 901 i 932 1021 871 919! 950 1039 917 965 996 1085
835 8421
861
36
42
. .
427 446 551 591 611 651 671 744 817 890 512 537 649 698 722 771 795 819 867 980 533 558 668 717 741 790 814 838 886 998 579 604 712 761 785 834 858 882 930 1040 694 719 821 870 894 943, 967 991 1039 1142 976 1001 1103 1152 1176 122511249 1273 1321 1424 6~4 680 830 887 915 972 999 1030 659 6811 835 892 921 978 1006 1035 I 106 134[ 880 937 966 1023 1051 1080 820 848 988 1045 1014 1131 1159 1188 1121 1159 1326 1402 1440 1515 1553 1591 1239 1281 1383 1647 1272 1314 1416 1690 1376 1378 1480 1777 1409 1411 1513 1820 1442 1443 1545 1863 1087 1092 1137 1245 1667 1234 1240 1282 1385 1833
1094 1131
i 1167 1203 1136 1173 ! 1209 1245 1238 1275 1311 I 1341 1520 1557 1593 162!1
48
CHP CHW
597 625 602 630 649 677 763 791 1045 1083 854 899
1348
1354 1396 1797 1985 2147 2149 2243 2341
CHM
CHP
CHW
952 1174 932 964 991 1216 1042 1014 1101 1318 1300 1313 1561
887 919
.INDICATES
IS USED
When ordering shafting, please specify the following information and if possible include a sketch similar to the one appearing below. This additional data will help elliminate errors. ') Diameter and length. 2) Number and sizes of keyway required. 3) Shaft length on either side of the pulley, measured from the edge of rim. 4) Diameter and length of journal if required. Please note that excessive shaft deflection is the main cause of pulley failure. It is therefore recommended that one be generous when selecting shaft sizes. It is also important to remember that while alloy steel increases shaft strength, it should not be used to decrease shaft diameter.
The shafting specified for use with Continental conveyor pulleys is AISI 1045, a high carbon steel with a tensile strength of approximately 105,000 Ibs. per square inch. This material is particularly well suited for applications requiring high grade transmission as the carbon content makes it one of the strongest steels in the carbon range (excluding alloy steels) and it machines to an extremely smooth finish.
This quick reference source will enable the reader to select the right pulley and shaft for a conveyor system. It has been prepared and used by experienced pulley engineers who know the importance of preventing conveyor breakdown by properly matching pulleys and shafts to the system.
1. Find the appropriate Horsepower coll:Jmn on Table I. Look down F.P.M. (Feet Per Minute) column until belt speed of conveyor corresponds. Read across to Horsepower column. This number is Te (Effective Tension) of conveyor system. Also Te = HP x 33,000 F.P.M. 2. Find the appropriate K factor from Table II. The K factor has to do with the type of drive and take-up of the conveyor system. Take this K factor x (times) Te. This is T 2 or T J (Slack Side Tension) for the conveyor system. T 2 is associated with the Drive Pulley, and T J is associated with the Non-Drive Pulley(s). 3. For Non-Drive Pulley(s), determine the arc in degrees the belt contacts each pulley. Then using Table III for each Non-Drive Pulley, determine the individual factor for each. Take this factor times TJ. This gives the resultant load for each Non-Drive Pulley. 4. For Drive Pulley, add T 2 and Te. This equals T1 (Tight Side Tension) for the Drive Pulley. Then divide T1 by T 2' This equals ratio for Table IV. Determine the arc of contact the belt makes with the Drive Pulley. Read down the Ratio Column until corresponding ratio is found; thE:n go across to Arc of Contact Column. Take this new factor times T2. This gives resultant load for the Drive Pulley. 5. From Table V find the desired belt width. Recommended pulley width is given in corresponding column. 6. To determine shaft size, use Table VI (a), or VI (b), (allowable shaft load). The table is computed for Non-Drive Pulleys, (shafts with 8000 psi allowable bending stress). For Drive Pulleys, we multiply allowable load column by 0.75. In effect, this allows 6000 psi stress for Drive Pulleys. Still using Table VI (a or b), we take the bearing centers of the pulley and subtract the face width. This number is used in the "Bearing Centers-(Minus) Face" columns. Next, using the resultant load we go down the "Bearing Centers-(Minus) Face" column until the value for allowable load is greater than our computed resultant load. The corresponding shaft is listed horizontally in the shaft size column. this procedure for each pulley. We follow
7. Next, we divide Tl and T3 by the belt width. This gives us PIW for both the Drive {Tv and Non-Drive (T 3) Pulleys. Then using Table VII, we select a pulley diameter with an allowable PIW greater than our computed PIW for each pulley. 8. Using Table VIII we again select pulley diameter by finding a diameter with maximum shaft size as large or larger than our computed shaft size, doing this for each pulley. 9. Select the larger of the two diameters found in procedure 7 and 8 for each pulley.
EXAMPLE
KNOWN: 100 Horsepower 300 F.P.M. Head Drive Lagged Head Pulley Automatic
TO FIND: T3 Load for each Pulley Pulley
2100 wrap on head e 42" Belt 60" Bearing Centers Browning Hubs or O.D.
Take-up
for each
Diameter
1. From Table I: 100 H.P. @ 300 F.P.M.=ll,OOO# 100 x 33,000 (Te). Also 300 -= 11,000#. 2. From Table II: Snubbed Drive, Lagged Drive, Automatic Take-up, K Factor = 0.38. 0.38 x 11,000# = 4180# (T2or T3). 3. The Non-Drive Pulleys have the following degrees of wr?p: Snub: Tail: 30. 180. Bend No.1: Bend No.2: go. 90.
Take-up:
180.
From Table III, the Bend Pulleys have a factor of 1.41422.418Q# x 1.41422 = 5911#. This is the resultant load for the Bend Pulleys. Also from Table III, factor for the Tail and Take-up Pulleys is 2.00000. Therefore, 2.00000 x 4180# = 8360# (resultant). The Snub Pulley has a factor of 0.51764. 4180# x 0.51764= 2164# (resultant). 4. For the Drive Pulley, Te + T2=15,180# (TJ. T1 -:- T2 = 3.63 (ratio). From Table IV using 210. wrap column and 3.63 ratio, we get a new factor of 4.5238 by interpolation. Then take 4.5238 x 4180# = 18,909# (resultant).
5. Since we have a 42" belt we can see from the recommended pulley width in Table V that we should use a 44" wide pulley.
7. T1 = 15,180# (15,180# -7 42" = 361 Ib./in.) T3 = 4,180# ( 4,180# + 42" = 100 Ib./in.) Using Table VII, we need a 30" Pulley for the Drive and 6" for the Non-Drive. 8. By using Table VIII and maximum shaft sizes, we see we need a 24" pulley for the Drive, 14" for the Tail and Take-up; 10" for the Bends, and 6" for the Snub.
9:. Therefore, we would select a 30" Drive (when ttlere is a choice of diameters, always use the largest), 14" Tail and Take-up, 6" Snub and 10" Bends.
NOTE:
It is also
important
to examine
the
belt
pulley diPulley is
6. We have a distance of 16" for bearing centers minus face (60 -44 = 16). With a load of 5911# for the Bend Pulleys, Table VilA) indicates a 3-15/16" shaft is needed The Snub Pulley has a resultant of 2164# (16" bearing centers minus face). Use a 27-{6"shaft. .The Tail and Take-up have resultants therefore, 4-7/16" are selected. of 8360#;
designed to support these loads, the belt manufacturer may require a larger diameter pulley to lessen smaller should this inch would the belt bending If their to factor their imposed by the are In per pulley. recommendations belt damage.
prevent
if a belt rated
suggest minimums
We use a factor of 0.75 for designing the Drive Pulley shaft to 6000 psi. We divide the resultant by this factor. 18,909 -7- 0.75 = 25,212. A 6" shaft with bearing centers minus face of 16" has a load rating of 27697 which is the smallest available without dropping below this 25,212.
10
PULLEY
FACTOR
IIK11
NOTE: For wet belts and smooth lagging, use bare pulley factor. For wet belts and grooved lagging, use lagged pulley factor. If arc of contact is unknown, assume the following: Type of drive Plain
Snubbed
TAB L E Dual or tandem
3800
RESULTANT
NOTE: R = T 3 X Factor
LOAD FACTOR-NON-DRIVE
11
VI b
LOADS
~-
TAPER-LOCK U B S (i)H
MINUS) LACE '/0 '/2 30
I
BEARINGCENl
2
12
'4
16
32
3:
36
1302 1802 3092 5156 7749 10872 14903 18283 24563 30272 37809 46504 56438 65125 77307 90921 0604:
T!~MA. Vi.BELT LE
-I,
TE/\fSION
ES)
PUI
PULLEY DIAME1ER
DIAME1E.
HES}
--
NOTE: Above tension ratings may be used for any arc of belt contact.
TABLE
Vl
SHAFT SIZES
DATA
REQUIRED
TO DETERMINE
PULLEY SPECIFICATIONS
give the foil
1. Diameter and Face Width 2. Crown and Type of Pulley (wing or 3. Unlagged or Lagged (type lagging) 4. Shaft Diameter (if specified) 5. Hub Size and Type 6. Bearing Centers 7. Belt Width 8. Position of Pulley in the Conveyor or Elevator
10. T)o T, or T, (if not (A) Type of Ti .-(B) Drive Pulley ~-, .--
c \, or gravity) or Un lagged
1D) F.P.M.'
(E) I-iorsepower (if not known, give the following)
(1) T.P.H.
(2) Center to center (3) Lift in feet distance
9. Arc of Contact
13
Continental welded steel wing type self cleaning conveyor and elevator pulleys.
(
Continental Conveyor Wing Pulleys are ruggedly constructed with a heavy center tube taking the direct load from the wing plates and transmitting this load through hubs to the shaft. The sloping wing plates automatically shed the material to each side of the pulley thus preventing build-up on the pulley face which can cause considerable damage to the belt, Welded steel wing type pulleys are recommended for tail shafts of belt conveyors and the boot shaft of bucket elevators.
DODGE "TAPER
TYPE HUB AND
LOCK"
r ~FACE ~ --l TYPE
CXT
HUB BUSHING
AND
AND
C.D.
BUSHING
l
'\
.i
'\
""
DIA.
Q. D. BUSHING
Ill"" 10 2-1/2" dia. 3/4" 1.7/S" 1-5/8"
NO.
CH-K
NO.
SK
E F J M N P W S
7/8" 10 3.7/16.' dia. 1" 10 3-15/16" dia. 1-7/16" 10 4-1/2" dia. 2" 10 5-1/2" dia. 2-1/2." 10 6" dia. 2-15/16"107"dia. '4-7/16" 10 8-1/2" dil6" 10 10" dia.
Split cast iron type with 3/4" taper per foot. Shaft keyed to bushing, bushing not keyed to pulley hub, torque transmitted through self locking taper.
,.-
Split taper of either malleable or cast iron type, 2" taper per foot. Shaft keyed to bushing, bushing not keyed to pulley hub. Torque transmitted through bolts.
DODGE
"TAPER
LOCK"
Split taper cast iron type 1-1/4" taper per foot. Shaft keyed to bushing, bushing not keyed to pulley hub. Torque transmitted through bolts.
14
~I
Known:
210 Wrap on Head Pulley 300 F.P.M 42" Belt ~ . Head Drive 60"Bea rlng Centers on all Pulleys Lagged Head Pulley Automatic Take-up To Find: Te and T 3 Diameter of each Put!ey Width of Pu.1J.eys ResuftantLoad of each PuJley Shaft Size for each Pulley 100 Horsepower
F.P.M.
2. Find the K factor for the conveyor from Table II. The K factor has to do with the type of driv~ and take-up of the system. Take this K factor x (times) Te. This result is T 3 (Slack side tension) for the conveyor system. 3. Having found the maximum slack side tension (T 3)' divide T 3 by the belt width. This will be the calcul~ed tension in pounds per inch of belt width (P.I.W.). Select a pulley diameter from Table )11 (Wing Pulley Allowable Tensions) which has a P.I.W. rating that is equal to or larger than the calculated
P.I.W.
1. From Table I: 100 H.P. at 300 F.P.M.=11,OOO# (Te). Also 100 x 33,000 = 11 000# 300 ,. 2. From Table II: Snubbed Drive, Lagged Drive, Automatic Take-up, K Factor is 0.38. 0.38 x 11,000# = 4180# (T 3)' 3. Slack Side Tension (T 3) divided by belt width is 4180# + 42 = 100 P.I.W. Thus from Table III a 16" diameter pulley has a P.I.W. rating equal to for greater than calculted P.I.W. The belting manufacturer's recommendations for minimum pulley diameter must also be considered and the larger of the two should be selected. 4. Since we have a 42" belt we must have a pulley face width two inches wider. Therefore we use a 44" wide pulley. 5. The Non-Drive Pulleys have the following degrees of wrap: Snub: 30' Take-up: 180" Tail: 180" Bends: 90" From Table IV, the Snub Pulley has a factor of 0.51764. 4180# x 0.51764 = 2164#. This is the resultant load for the Snub Pulley. Also from Table IV, factor for the Tail and Take-Up is 2.00000, therefore, 4180# x 2.00000 = 8360# (resultant). The Bend Pulleys have a 1.41422 factor. 4180# x 1.41422 = 5911# (resultant). 6. Bearing Centers -(Minus) Face for all pulleys: 60" -(Minus) 44" = 16". From Table V the shaft size for the snub pulley would be 2-11/16" (Allowable Load of 2350# is greater than Calculated Load of2164#). FortheTail and Take-Up a 4-7/16" shaft is required. (9360# being greater than 8360#). For the Bend Pulleys a 3-15/16" shaft is required. (6690# being greater than 5911#).
4. Pulley width in most cases will be the same as that of the drive pulley in the system. (Two inches wider than the belt for belts up to 42" wide; three inches wider than the belt for belts over 42" wide). 5. To calculate the resultant load, first determine the arc in degrees the belt contacts each pulley. Then using Table IV (Resultant Load Factor) find the individual factor for each. Take this factor x (times) T 3. This givesthe resultant load for each of the pulleys in question. 6. To determine shaft size, use Table V (Wing Pulley Allowable Shaft Loads). The table is computed for shaft stresses of 6000 psi. For 8000 psi bending stress use a 1.33 multiplier. Still using Table V, take the bearing centers of the pulley and subtract the face width (See Figure 1). This number is used in the "Bearing Centers -(Minus) Face" columns. Next, using the resultant load obtained in step 5 go down the proper "Bearing Centers -(Minus) Face" column until the value for allowable load is greater than the computed resultant load. Select the corresponding shaft listed horizontally in the shaft size column.
15
EXAMPLE
EFFECTIVE
TENSION
Te
FACTOR
II KI1
NOTE: For wet belts and smooth lagging, u~.e bare pulley factor. For wet belts and grooved lagging, use lagged pulley factor. If arc of contact is unknown, assume the following:
Type of drive
Plain Snubbed Dual or tandem
ALLOWABLE
SHAFT
LOADS
IV
RESULTANT
NOTE: R = T 3 X Factor
LOAD FACTOR-NON-DRIVE
WING PULLEY
ALLOWABLE
TENSIONS
Allowable Shaft Loads for 6.000 psi Stress (Use Multiplier of 1.33 for 8.000 psi Stress)
TAB.LE
~
17
18
VULCANIZED
RUBBER
LAGGING
Vulcanized rubber lagging without cloth fabric is applied directly to the pulley face by the vulcanizing process. The finished rubber surface has a cloth impression left on it. Lagging is primarily used in conditions that necessitate increasing the tractive capacity of the pulley in drive applications or for resisting abrasive conditions on other pulley applications. Standard lagging is of 60 durometer shore A material and is available in thicknesses of 6, 10, 16, -20 and 25 mm. The tolerances of vulcanized lagging are 4 mm on the rubber thickness. Due to these tolerances, it is therefore possible that a pulley have a high crown, flat or even concave surface at certain points even though the pulley had a perfect crown prior to lagging. The fact that rubber displaces can also have on effect on the crown since in high tension application, a certain amount of the crown can be pressed out. If you have an application that requires exact tolerances, we suggest you specify a machined lagged pulley.
HERRINGBONE
RUBBER
LAGGING
Herringbone lagging is applied to increase the tractive capacity of the pulley under wet or dirty conditions in which plain lagging would not be sufficient for the task. The herringbone design helps avoid build up of foreign material between the belt and pulley surface thus lowering the belt wear and minimizing alignment problems. The minimum thickness that can be effectively grooved with the herringbone pattern is 10 mm. As with plain lagging, the same rubber specifications and limitations apply. Therefore if exact tolerances are necessary, a machined lagged pulley is advisable.
HOLZ SUDELAG
A quality rubber lagging is bonded directly to special traction pads which in turn are fitted to the pulley rim by special retaining bars. This system allows new lagging to be installed on the pulley without removing it from its position on the conveyor.
LAGGED
WING
PULLEYS
A lagged wing pulley is used in cases involving build up of material between the conveyor belt and pulley causing belt misalignment and excessive wear. It can also be used in cases requiring a greater tractive capacity between belt and pulley. The lagged wing pulley principle works as follows. Upon contact with the belt, the rubber on the wing tip compresses, when tension is releived it immediatly returns to its original shape thereby cleaning itself in the process. These wing tip rubber sections are easily replaceable.
19
SPIRAL.
DRUM
PULLEYS
This unique design reduces belt wear and misalgnment. As with all self cleaning pulleys, rotation automatically starts the cleaning action discharging foreign material to the sides of the conveyor. The Continental spiral drum pulley is formed by a pair of vertical steel flat bars helically wound around a drum, having both begun from the opposite extremities of the pulley and meeting in the middle. There is a uniform pitch to these helices and thus material is uniformly discharged. This design reduces the possibility of material build up between the belt and pulley in application where a self cleaning wing pulley is not practical.
SPIRAL
WING
PULLEYS
The spiral wing pulley is used in applications that necessitate reducing material build up between the belt and pulley while also utilising the wing principle of the self cleaning pulley. The cleaning action begins automatically when rotation begins and material is discharged to both sides of the conveyor. The spiral wing pulley is constructed by helically winding a pair of flat steel bars around the wing pulley; having begun at opposite extremities and r:neeting in the center. This design minimizes belt misalignment afld decreases belt wear. It can be supplied in either flat or crown face in most standard sizes.
\-I
SPECIAL
DRUM
TYPE pULLEYS
Special modifications can be made to standard pulleys in order to suit individual customers needs. To the right we see a pulley modified with retaining rims to assure belt alignment in the head section of a bucket elevator.
SPECIAL
SELF
CLEANING
PULLEYS
Continental will engineer pulleys for any special application that may be required. The pulley shown here to the right necessitated entire stainless steel construction and an entirely open design as it was to come in contact with an acidic bath.
20
21
Elevator
pulleys.
Continental welded steel elevator pulleys are manufactured to close tolerances and are designed to withstand high shock loads. A one piece single disc construction is used in which the rim is continuously welded, on both sides, to the center disc. This assures maximum strength with a minimum of deflection. Several models including split type and heavy duty are available in addition to the standard models. An engineered class is also available to suit any application. The standard range of single disc elevator pulleys incorporate either the 0.0. or the CXT hub and bushing systems. These ensure the greatest possible holding power for single hub applications. The Dodge "taper lock" however is available on request. Shaft size must be given careful consideration in the selection of single disc elevator pulleys since the load is concentrated at one particular point on the shaft. As with conventional welded steel conveyor pulleys, a variety of lagging including plain, herringbone and rough top is available.
* 8" FACE
DI~
HUB
tHK tHE tHF tHJ tHK tHE tHF tHJ tHK tHE tHF tHJ tHE tHF tHJ tHM tHE tHF tHJ tHM tHE tHF tHJ tHM A
9" FACE
IWT
A 3.3/8 2.31/32 2.13/1& 2.19/32 3-3/8 2.31/32 2.13/1& 2.19/32 3.11/32 2.15/1& 2-25/32 M/I& 2.15/1& 2-25/32 2.1/2 2 2.21/32 2.3/4 2.1/2 Z 2.21/32 2.3/4 2.11l 1.15/1& 2.21/32 2.3/4 2.1/2 1.15/1& 1-7/8 2.5/8 3-5/1 4.1/2 1.7/1 2.5/1 3-5/1 4-1/2 1.7/1 2.5/1 3.5/1 4-1/2 2.5/8 3-5/1 4-1/2 5-11l 2.5/1 3-5/1 4-11l 5-11l Z.5/I 3-5/1 4-11l 5-11l 1 5/1 3-5/1 4-11l 5-11l
"" FACE
0 Iwr
54 &0 && 7& &3 &8 75 84 77 82 89 98 4-3/8 3-31/32 3-13/16 3-19/32 4-3/8 3-31/32 3-13/16 3-19/32 4-11/32 3-15/16 3-25/32 3-t/16 3-15/16 3-25/32 3-1/2 3 3-29/32 3-3/4 3-1/2 3 3-29/32 3-3/4 3-1/2 2-15/16 3-29/32 3-3/4 3-1/2 2-15/16 1-1/8 2-5/8 3-5/8 4-1/2 1-1/8 2-5/8 3-5/8 4-1/2 1-1/8 2-5/8 3-5/8 4-1/2 2-5/8 3-5/8 4-1/2 5-1/2 2-5/8 3-5/8 4-1/2 5-1/2 2-5/8 3-5/8 4-1/2 5-1/2 2-5/8 3-5/8 4-1/2 5-1/2 4-3/4 1-15/32 4-13/32 2-5/16 3-8/16 2-5/8 2-29/32 2-29/32 4-3/4 1-15/32 4-13/32 2-5/16 3-8/16 2-5/8 2-29/32 2-29/32
WT
61 61 13 83 10 16 83 92
3-3/4 1.15/32 3-13/32 2.5/1& M/I& 2.5/8 1.21/32 2.29/32 3-3/4 1.15/32 3-13/32 2.5/1& M/I& 2.5/8 1.21/32 2.21/32 3-25/32 1.15/32 3-7/1& 2.5/1& 2.19/32 2.5/1 1.15/1& 2-29/32
4-25/32 1-15/32 85 4-1/16 2-5/16 91 3-19/32 2-5/8 91 2-15/1& 2-29/32 101 4-1/16 2-5/16 129 3-11/32 2-5/8 135 3 2-29/32 142 2-1/2 3-1/32 178 4-15/32 2-5/16 191 3-5/8 2-5/8 203 3 2-29/32 212 2-1/2 3-1/32 231 4-15/32 2-5/16 259 3-5/8 2-5/8 264 3 2-29/32 213 3-1/16 3-1/32 293 4-15/32 2-5/16 328 3-5/8 2-5/8 334 3 '2-29/32 343 3-1/16 3-1/32 362
3-7/1& 2.15/1& 11& 2.1913Z 2.5/1 122 2 2.21/32 132 1.11l 3.7/32 164 3.15/32 2.5/1& 181 2.5/1 2.5/1 18& 2 2.21/32 195 1.11l 3.7/32 215 3-15/32 2.5/1& 239 2.5/1 2.5/1 245 2 2.21/32 253 2.1/1& 3.7/32 273 3.15/32 2.5/1& 305 2.5/1 2.5/1 311 2 2-29/32 320 2.1/1& 3-7/32 339
41"
13"FACE
DIAl
HUB CHK CHE CHF CHJ CHK CHE CHF CHJ CHK CHE CHF CHJ CHE CHF CHJ CHM CHE CHF CHJ CHM CHE CHF CHJ CHM CHE CHF CHJ CHM 5-3/8 4-31/32 4-13/16 4-19/32 5-3/8 4-31/32 4-13/16 4-19/32 5-11/32 4-15/16 4-25/32 4-1/16 4-15/16 4-25/32 4-1/2 4 4-29/32 4-3/4 4-1/2 4 4-21/32 4-3/4 4-1/2 3-15/16 4-29/32 4-3/4 4-1/2 3-15/16 1-1/8 2-5/8 3-5/8 4-1/2 1-1/8 2-5/8 3-5/8 4-1/2 1-1/8 2-5/1 3-5/8 4-1/2 2-5/1 3-5/1 4-1/2 5-1/2 Z-5/I 3-5/1 4-1/2 5-1/2 2-5/1 3-5/1 4-1/2 5-1/2 2-5/8 3-5/8 4-1/2 5-1/2 5-3/4 1-15/3 19 5-13/32 2-5/16 85 4-1/16 2-5/8 91 3-21/32 2-21/32 101 5-3/4 1-15/32 91 5-13/32 2-5/16 91 4-1/16 2-5/8 103 3-21/32 2-29/32 113 5-25/32 1-15/32 108 5-1/16 2-5/16 114 4-11/32 2-5/1 120 3-15/16 2-21/32 129 5-1/16 2-5/16 142 4-18/32 2-5/8 148 4 2-21/32 158 3-1/2 3-1/32 201 5-15/32 2-5/16 234 4-5/1 2-5/8 240 4 2-29/32 249 3-1/2 3-1/32 268 5-15/32 2-5/16 303 4-5/1 2-5/8 301 4 2-21/32 318 4-1/16 3-1/32 331 5-15/32 2-5/16 380 4-5/1 2-5/8 386 4 2-29/32 395 4-1/16 3-1/32 414
A , .,
6-3/B 5-31/32 5-13/16 5-19/32 6-3/B 5-31/32 5-13/16 5-19/32 6-11/32 5-15/32 5-25/32 5-9/16 5-15/16 5-25/32 5-1/2 5 5-21/32 5-3/4 5-1/2 5 5-21/32 5-3/4 5-1/2 4-15/16 5-29/32 5-3/4 5-1/2 4-15/16
15" FACE
CI
D 'WI"
I
&-7/1 &-15132 &-5/16 &-3132 1.7/1 2.5/1 3.5/1 4-1/2 7.1/4 1.15/32 92 6.29/32 2.5/16 98 &-1116 2.5/1 104 5-13/32 2.21/32 114 7-1/4 1.15/32 105 &-21/32 2-5/16 111 6-1/16 2.5/1 III 513/32 2-21/32 127 79/32 6-15/16 6.3/32 5-7/16 6-15/16 6-3/32 5.1/2 5 6.31/32 I 6118 5.1/2 5 &-31/321 6-1/8 5.1/2 5.9/16 631/32 &-1/1 5.1/2 5.9/16 I 1.15/32 2.5/16 2.5/1 2.29/32 2.5/16 2-5/1 2-29/32 3.'7/32 25/16 2.5/1 2-29/32 3.7/32 2.5/16 2.5/1 2-29/32 3-7/32 2-5/16 2.5/1 2.29/32 3.7/32 124 130 136 146 163 181 178 231 264 269 278 298 339 344 353 373 422 427 436 456
ii::I
18'1
1-7/B 2-5/B 3-5/8 4-1/2 1-7/8 2-5/B 3-5/8 4-1/2 1-7/8 2-5/8 3-5/8 4-1/2 2-5/1 3-5/1 4-1/2 5-1/2 2.5/1 3-5/1 4-1/2 5-1/2 2-5/1 3-5/1 4-1/2 5-1/2 2-5/1 3-5/B 4-1/2 5-1/2
6-3/4 1-15/32 BB 6-13/32 2-5/16 93 5-1/16 2-5/8 100 4-21/32 2-21/32 109 6-3/4 1-15/32 100 6-13/32 2-5/16 106 5-1/16 2-5/8 113 4-29/32 2-29/32 122 6-25/32 1-15/32 119 6-7/16 2-5/11 125 5-11/32 2-5/B 131 4-15/16 2-21/32 140 6-7/16 2-5/11 156 5-11/32 2-5/8 162 5 2-21/32 171 4-1/2 3-7/32 223 6-15/32 2-5/16 254 5-5/1 2-5/1 259 5 2-21/32 26B 4-1/2 3-7/32 2BB 6-15/32 2-5/16 327 5-5/1 2-5/8 333 5 2-21/32 341 5-1/16 3-7/32 361 6-15/32 2-5/16 40B 5.5/B 2-5/1 414 5 2-29/32 422 5-1/16 3-7/32 442
6.718 1.7/8 &-15132 2-5/8 6.5/16 3-518 6-;;/32 4-1/2 6.27/32 6.7116 &-9132 6-1/16 1 17/8 2-5/1 3-5/1 4-1/2
20'1
24"1
6-7116 2.5/1 &-9132 3-5/1 6 4.112 5.1/2 5.1/2 6-13/321 2-5/1 6.1/4 3-5/8 6 4-1/2 5.1/2 5-112 &-13/32 1 6.1/4 6 5.7/161 6-13/32 6-1/4 6 5.7/16 I 2-5/1 3-5/1 41/2 5112 2518 3.5/1 4.1/2 5-1/2
30"1
36'
42"