Professional Documents
Culture Documents
Hilti TE 7-A
cordless rotary hammer
Products/Services
Measuring systems
Page 5-6
Page 7-8
Page 9-10
Page 11-12
Powder-actuated fastening
Page 13
Page 14
Page 15-16
Anchor systems
Page 17-18
Installation systems
Page 19
Our dedicated Hilti Team can guide you through our extensive range of tools and consumables. Offering advice and support you can trust; application training, technical literature; on-site testing and after-sales service.
Quick, easy and toll free 08000 23331
Hilti Customer Service is a quick contact when you would like to arrange a face to face meeting with your Hilti representative or when you have a specific question for our team of technical specialists. Get in touch with us for: Competent advice. Tenders and quotations. Answers to questions about products and applications. Placing orders and obtaining delivery information. Information about availability of individual Hilti products. Making suggestions and complaints. Information on repairs and maintenance. Information regarding your local Hilti Centre.
Should you require professional advice or a product demonstration, on a building site, at your office or in a workshop your Hilti representative is your face to face contact. Our field-based technical sales people or field engineers can assist you by: Supplying the right Hilti product for each application. Providing professional advice and sales assistance when selecting Hilti products for your individual needs. Calculating the most productive or least expensive solution in each case. Offer solutions to identified problems at your premises or on your jobsite. Demonstrating the latest, innovative Hilti products.
Hilti representatives are your source of professional know-how and can facilitate your success by ensuring that you are always a step ahead.
At Hiltis specialised shops, we display Hilti products in a way that makes it quick and easy to find the right product and applicable accessories for your specific application. Our well trained staff offer: Advice and assistance with your purchases. Product demonstrations under conditions close to those met in practice. Assessments and try-outs on all Hilti products. Minor service/repairs on tools. Arranging repairs and disposal of equipment.
At Hilti we are committed to helping you save time and money. Visit our website for a comprehensive view of our products and services.
www.za.hilti.com
Hilti Online
Measuring systems
Application
Product
Technical data
PD 4 Range Meter
Measuring of distances. Setting out via tracking setting. Water resistant and Dust tight. Measurement range: 0.05m up to 70m for interior and exterior applications. Accuracy: Typically +/- 2mm over 70m.
PD 40 / PD 42 Range Meter
Measuring of distances, areas, volume, painters square and more. Measuring to inaccessible points using Pythagoras. Setting out using Tracking. Add and Subtract measurements. Minimum / Maximum function. Saves the last 30 measurements with functions. Measurement range: 0.05m up to 200m. 0.05m to 100m without target plate. 100m to 200m with target plate. Accuracy: Typically +/- 1mm over 200m.
Functions: Measuring of distances, areas, volume, radius, circumference and more. Measuring to inaccessible points using Pythagoras. Setting out using Tracking. Add and Subtract measurements. Minimum / Maximum function. Data transfer via bluetooth from PD 38 to PDA. Unlimited number of measurement storage. Transfer distances to pictures taken. Auto CAD function (line draw). Transfer measurements to excel spreadsheet. Measurement range: 0.05m up to 200m. Accuracy: Typically +/- 1.5mm over 200m. Functions: Setting out drywall tracks. Installing out drywall partitions. Erecting steel structures. Plumb. 90 degrees angles. Vertical alignment. Horisontal alignment. Range: Up to 30m. System Accuracy: 3mm over 30m.
Functions: Self leveling horisontal line. Self leveling vertical line. Combination of horisontal and vertical lines. Lines can be detected with laser receiver. Can be used indoors and outdoors. Range: Up to 30m with PMA 30 Laser Receiver. System Accuracy & exterior app: 3mm over 30m.
PMC 36 Combilaser
Functions: Combination of PMP 34 and PML 32 - R lasers. Horisontal and vertical lines. Plumb. 90 degrees in both directions. Range: Up to 30m with PMA 30 Laser Receiver. System Accuracy: 3mm over 30m.
Measuring systems
Application
Product
Technical data
Functions: Suspended ceilings. Cladding. Faade installation. Steel construction. Mechanical and electrical installations. Formwork. Range: Up to 300m radius . System Accuracy: 1mm at 10m.
PR 20 Rotating Laser
Functions: Excavation work. Concrete formwork. Landscaping / Slopes. Leveling of concrete slabs. Range: Up to 400m radius . System Accuracy: 0.05mm at 10m.
PP 11 Pipe Laser
Functions: Aligning all types of pipes. Set out slopes for pipes. Remote control up to 60m. Range: Up to 400m. System Accuracy: 3mm over the range.
PX 10 Transpointer
Functions: Locate the exit point when drilling through holes. Determine the wall thickness. No more upside down coring. Range: 1 to 135cm. System Accuracy: 1mm over the range.
PS 200 Ferroscan
Functions: Obtain concrete cover info over large areas for acceptance inspections. Cableless connection between monitor and scanner Includes powerful PC software for office analysis and report creation. More than scanner could be used simultaneously. Range: 180mm cover.
Product
Technical data
Power in W 400
TE 2-A
Total Mobility for drilling anchor holes Drilling anchor holes in concrete, stone and masonary. Drill bit diameter 4-16mm dia. (Masonery 4mm10mm dia). Drilling in wood and steel using a quick release chuck and a TEC adaptor. Screwdriving using a special bit holder. Choice of batteries with capacities of 2.0 Ah or 3.0 Ah.
2
TE 2 TE 2-M
A special for anchor holes in concrete and masonry Drilling anchor holes in concrete and masonry, 4-12 mm dia. (max. 20 mm) Drilling anchor holes in brittle materials, 4-12 mm dia. (max. 20 mm) Drilling through-holes / penetrations in concrete and masonry, 4-12 mm dia. (max. 20 mm) Drilling wood, up to 20 mm dia. Drilling solid metal, 3-13 mm dia. and sheet metal up to 20 mm dia. Driving in and removing screws
2,3/2,6
650
0-4600
TE 6 S DRS
Easy and powerful drilling of anchor holes Drilling anchor holes in concrete, stone and masonry Drill bit diameter range: 4 mm to 24 mm (6mm14mm optimal in concrete) Rec. drill bit diameter range: 5 mm to 12 mm Drilling in wood and steel, using quick release chuck and cylindrical shank twist drills up to 13 mm dia. Srewdriving using a special bit holder Dust removal system
2,8
650
0-5100 0-2700
TE 7-A
36 Volt power for peak performance Drilling anchor holes in concrete and masonry Drilling 4-28mm Rec 5-16mm Dust removal system Chipping function Li-ion batteries
4.9
720
0-4000
TE 7-C
The Rotary Hammer for Anchor hole Drilling Drilling anchor holes in concrete and masonry Drilling 4-28mm Rec 5-16mm Dust removal system Chipping function
3,2
720
0-4020
TE 16
The Rotary Hammer for Anchor hole Drilling Drilling anchor holes in concrete and masonry (10mm-20mm optimal in concrete) Drilling in wood and metal Driving anchor screws and concrete screws
3.8
800
0-4080
Product
Technical data
Weight in kg 4,05
Power in W 850
TE 16-M
The Multifunctional Rotary Hammer Drill Drilling anchor holes and through holes in concrete and masonry Mixing materials and paint Drilling in wood and metal Driving anchor screws and concrete srews Light chiseling on masonry and finishing or cleaning up on concrete
2
TE 40 The universal combihammer Drilling anchor holes in concrete and masonary. Optimal diameter of 16mm. Drilling range 4-24mm. Drilling into wood and steel using a quick release chuck. 5,5 1010 0-3180
TE 56 TE 56-ATC
The convenient lightweight Hammer drilling in concrete and masonry with carbide tipped drill bits, 12-40 mm dia (16mm-22mm optimum). Hammer drilling in concrete with breach bits, 40-80 mm dia. Hammer drilling in masonry with percussion core bits, 40-150 mm dia. Chiselling using pointed, flat, wide flat, hollow, channel, round and mortar chisels and bushing tools
5,9
1100
0-2880
TE 76 TE 76-ATC
Mega power with revolutionary operator protection Hammer drilling in concrete and masonry with carbide tipped drill bits, 12-40 mm dia (22mm- 40mm optimum). Hammer drilling in concrete and masonry with breach bits, 45-80 mm dia. Hammer drilling in concrete and masonry with percussion core bits, 45-150 mm dia. Chiselling using pointed, flat, wide flat, hollow, channel, round and mortar chisels and bushing tools ATC (Active Torque Control) version available
7/7,9
1300
0-2770
TE 706 TE 706-AVR
For top chiselling performance Medium to heavy-duty chiseling applications including breaches, demolition and corrective work, mainly on walls. Ideal for use in renovation and the plumbing trade Chiseling openings <20x20> cm forpipes and cable trays Chiseling openings <20x20> cm for windows and doors Removing plaster and rendering AVR (Active Vibration Reduction)
7,2
1200
TE 905-AVR
The gentle giant Removal and demolition work with concrete, masonry, stone and asphalt Chiseling performance for a breach in medium-hard concrete approx. 1300 cm /min Vibration reduction of about 50% by revolutionary AVR system (intergrated vibration damping)
3
11,3
1600
0-2200
Product
Technical data
Features/Benefits
DD 100 MEC Hand held coring machine Power input: 1700 W Weight 6,2 kg
DD-BI corebits Anchor holes in concrete (wet) 8-42 mm dia. (hand held) 8-87 mm dia. (using the drill stand) DD-BI corebits Penetration in masonry (dry) 16-162 mm dia.
Wet drilling in concrete (8-42 mm dia.) hand held (using the water swivel) Dry drilling in masonry (16-162 mm dia.) hand held (Using the extraction head)
DD 130 Hand held coring machine Rig mounted coring rig Power input: 1900 W Weight 7,7 kg Rig 13 kg
DD-BI corebits Concrete (wet) 12-62 mm dia. (hand held) 12-152 mm dia. (using the drill stand) Penetration in masonry (dry) 16-162 mm dia.
Wet drilling in concrete (12-62 mm dia.) hand held (12-152 mm using drill stand) Dry drilling in masonry (16-162 mm dia.) hand held
DD 200 Diamond drilling systems Rig mounted coring machine Nominal power: 2600 W Weight 46 kg including stand
Making breaches for supply and disposal lines. Making breaches for fresh and exhaust air ducts Drilling perforations Drilling holes for house/building supply lines Removing test cores
Core bit change system requiring no tool Four speeds Mechanical safety (slip) clutch Oil lubrication with circulation pump Electronic speed stabiliser Electronic starting current regulator Electronic overland protector Service indicator Automatic cut-out brushes
Slitting tool for installing electric cables and conduits on concrete, sand-lime block, etc. Simultaneously cutting of two slits in one operation Chase up to 46mm wide and 40mm deep
Very high cutting performance with specially designed diamond dics Almost dustless sitting operation with VCU40 vacuum cleaner Slit depth, can be adjusted easily, precisely and securely
DCH 300/230
Can be used to cut reinforced concrete, granite curbstones, slabs, brick and masonry blocks. Accessories available
10
Application
Product
Technical data
DAG 115 Max. disc diameter: Speed: Power input: For steel cutting & grinding 115 mm 11000 r.p.m. 670 w
AG 125-S Max. disc diameter: Speed: Power input: Weight: Spindle thread connection: Cutting depth: approx. For steel cutting & grinding 125 mm 11000 r.p.m. 1020 w 1.6 kg M 14 30 mm
AG 230-S Max. disc diameter: Speed: Power input: Weight: Spindle thread connection: Cutting depth: approx. For stell cutting & grinding 230 mm 6500 r.p.m. 2100 w 4,3 kg M 14 60 mm
DCG 125-S
Max. disc diameter: Speed: Power input: Weight: Spindle thread connection: Cutting depth: approx. For stone/concrete cutting Smart power Anti kick back
DC 230-S
Max. disc diameter: 230 mm Speed: 6500 r.p.m. Power input: 2500 w Weight DC 230S: 5,1 kg Weight DC 230S-EX: 6.0 kg Spindle thread connection: M 14 Cutting depth: DC 230S-EX: approx. 65 mm Cutting depth: DC 230S-EX up to 60 mm adjustable in 5 mm increments without tool For stone/concrete cutting & grinding
Diamond Cutting Disks (125mm and 230mm diameter) C1 Concrete / Cement Products C2 Concrete / Hard Aggregates M1 Masonry Sand lime blocks M2 Bricks / Tiles U10 Universal T10 Tiles Abrasive Cutting & Grinding disks 115mm Steel cutting disk 115mm Grinding disk 230mm Steel cutting disk 230mm Masonary cutting disk 230mm Grinding disk Various specification 350mm & 400mm discs 11
Application
Product
Technical data
Power: Speed under no load: 1st gear: 2nd gear: Max. torque: Weight:
Hammer dilling in masonry: (never concrete) Drill bits with smooth shanks 3-16mm dia. Rotary drilling in steel/metal: Drill bits with smooth shanks 1.5-13mm dia. Rotary drilling in softwood: Rotary drilling in hardwood: SF 121-A cordless screwdriver (2.0Ah) (3.0Ah) Power: 2.0 Ah on 12 V = 24 Wh 3.0 Ah on 12 V = 36 Wh 1st speed: 0 - 400 r.p.m. 2nd speed: 0 - 1300 r.p.m. Max. torque: (flexible screw fastening in wood); 25 Nm Torque regulation: 1.5 Nm - 10 Nm in 15 increments Chuck range: 1.5-13 mm Weight incl. battery and chuck 1.95 kg
Power: 1st speed: 2nd speed: Torque settings: Max. torque: Chuck range: Weight:
3.0 Ah on 15.6 V = 46.8 Wh 0 - 450 r.p.m. 0 - 1450 r.p.m. 2.0-12 Nm in 15 increments (screws in hard material) 34 Nm 1.5-13 mm 2.18 kg
SD 5000 Nominal power: No load speed: Max. torque: Weight: SMD 57 Weight: Length: Length incl. SD5000: Screwdriving depth: Contact pressure: Suitable drywall screws (length): Constant-on switch: Power Max. speed no load Max. torque: Reversing switch: Supply cord length: Weight:
710 W 0-5000 r.p.m. 9.5 Nm 1,4 kg 0,33 kg 180 mm 410 mm steplessly adjustable up to 45N (4,5 kp) 9-57 mm Yes 450W 4000rpm 7 Nm Yes 5m 1.3 kg
SF 4000
12
Application
Product
Technical data
ST 2500
Constant-on switch: Power Max. torque: No load speed: Reversing switch: Supply cord length: Variable speed switch: Weight:
SFH 144
Voltage/battery capacity: 14.4 V/2.6 AH Li-ion No load speed (gears): 350/1360/1900U/min. (3) Max. screwdriving torque-soft joint/hard joint: 33/70 Nm Torque regulation: 2 to 12 Nm in 15 steps Keyless chuck: Tungsten carbide jaws, 1.5 to 13mm Weight (incl. battery and chuck): 2.4kg Hammering speed (rpm) 34200
SIW 144
SI 100
13
Powder-actuated systems
Application
Product DX 36 M
Technical data
Uses: A modern tool having sophisticated technological features for economical repetitive fastening.
DX 460
Uses: Fully automatic universal tool. Making universal fastenings in concrete, brick and steel for nails/studs up to 47mm length.
DX 460 MX 72
Uses: Fully automatic tool for repetitive fastenings to steel, concrete and sand stone with collated nails up to 72mm.
DX 462HM
Uses: Fully automatic tool for marking and identification stamping. Stamping on finished/semifinished metal and castings.
DX 462CM
Uses: Fully automatic tool for marking and identification stamping. Stamping on cold metal and castings.
DX 460 GR
Uses: Fully automatic universal tool for fixing grating & floor traps
DX 76 F15
Uses: Approved method of fastening profile metal sheets to steel substructures. The approval covers the coordinated system of components consisting of the 6.8/18M cartridge, X-ENP nail for profile metal sheets and the DX 76 powder-actuated fastening tool.
X-BT system
The X-BT system consists of X-BT 4000-A battery operated drill. DX 351 BT/BTG powder-actuated tool and X-BT fasteners.
Uses: X-BT is an innovative way of fastening to pre-painted steel without damaging the surface. X-BT is designed to work on construction steels as thin as 8mm without through-penetration.
Uses: Fast installation in masonary/concrete of: X-EKS Conduit clips, X-ET Trucking fasteners, X-HS M8 rod hangers, X-FB Metal Coduit clips, X-ECT Cable Tie fastener, X-DFB Double Conduit clips, X-EKSC Closed snap-in conduit clip
14
Application
Product
Features/Benefits
WSC 255-KE Power input 1300 W Cutting depth 0-55 mm Weight 4.3 kg
Ripping, cross-cutting and mitre cuts Cut-outs in kitchen work tops Cutting panelled ceiling edge gaps Square-edging of rough planks
Ripping, cross-cutting and mitre cuts Cut-outs in kitchen work tops Cutting panelled ceiling edge gaps Square-edging of rough planks Cutting boards in timber yards or for concrete forming
WFE 450 Power input 450 W Sanding plate 150 dia. Weight 2.1 kg
On flat and curved surfaces where a high rate of removal is required Fine surface finishing For sanding Softwood and hardwood All wood materials Paint and varnish Hardened filler
WFO 280 Power input 350 W Sanding plate dimensions 223x112 mm Weight 2.8 kg
On flat and curved surfaces where a high rate of removal is required Fine surface finishing For sanding Softwood and hardwood All wood materials Paint and varnish Hardened filler
Suitable for everyday uses on sites for: Curved cuts Mitre and bevel cuts up to 45 Precise square cuts Cutting close to edges Cut-outs, cutting from the underside
Sheet metal, stainless steel, aluminium Softwood / hardwood, square timber, nail-ridden wood Plastic materials Composites Gas concrete Drywall / gypsum panels Forming boards Technical data Power input: No-load stroke rate: Stroke length: Weight:
Hilti Solution
Technical data
Features/Benefits
Passive fire prevention Fire rated closing of openings with approval systems from Hilti
sodf
Z8Z iJdjf iwhr 4i5k 23awp3i iuh. irdw 4e0 NoWE iloi4 u9+ 288u 12oe jtf-x-.vbv 27 oo uze bvh, ireiv
fen
m,ev
dsc
hutz
stop
Temporary closing of penetrations cored during construction Sealing individual cables and bunched cables in small breaches Bunched cables and cable runs / trays in medium sized penetrations Temporary or permanent sealing of openings during construction
CP
655 Bra nds sodf chu Z8Z m,ev tzst iJdjfi e 4i5k 23aw whri irdw p3i uh. u9+ iloi4j 4e0 No 12oe tf-x 288u WE oo -.vbv 27 bvh, ire
One solution for various openings Ideal for difficult to reach openings Impervious to smoke
l sodfm,ev iJdjfiwhriuh Z8Z 23awp3i4 . NoWE 4i5kirdwilo e0288u2 u9+12oe i4jtf-x-.vbvbvh, 7 uze oo ireiv
Very good integrity / fire rating Excellent working properties due to adjustable consistency; Can be pumped
CP 671
chtung sodfm,ev iJdjfiwhriuh. Z8Z 23awp3i4e NoWE 4i5kirdwiloi4 0288u27 u9+12oeo jtf-x-.vbvbv uze h, ireiv o
Brandsch utzbeschi
Cable runs / trays in large openings Cable coating to delay the spread of fire
7
Sealing cable/ pipe penetrations CP 611-A Intumescent Firestop mastic
CP 611 A Bra nds
sod chu tzm Z8Zfm,ev ass iJdj 4i5k 23a e wpfiwhriuh u9+ irdwiloi4 3i4e . 12 02 No oeo jtf-x-.v 88u WE o bvb 27 uze vh, ireiv
Single cables and bunched cables in small penetrations Plastic pipes up to 50 mm dia. Metal pipes
642 CP
16
Building joints
Expansion joints and connection joints subjected to expansion in fire rated walls and floors Metal pipes
Product
Features/Benefits
CF 125-50
Insulation and filling Foam yield up to 50 litres Work breaks possible Application with dispensing gun No CFCs Building material class B2, DIN 4102 Approval for mining uses tamping and sealing
CF-DS1 dispenser
Dispenser for filling and insulating with CF 125-50 foams Precise application and easy working Important! Once used, always leave the foam can on the dispenser Clean dispenser internally with CFR 1 every 3 months at the most
CF 116-45
Filling and insulation Foam yield 45 litres No CFCs May be applied using the CF-FA1finger adaptor
CF-FA1
CFR1 cleaner
17
Anchor systems
Application
Technical data
Guide load
A4 316
Base Material Concrete, in the tension or compression zone Hard natural stone Use Fastening through in-place parts e.g. angles Tracks, channels, machines, wooden beams etc. Material Steel, galvanised by 5 microns A4 stainless steel (material 1,4401 / AISI 316) Features A safety wedge sleeve for reliable anchoring and certain follow up expansion Short and simple setting operations Fire resistance A stud anchor for different anchorage depths Small anchorage depth for low tensile loads; large anchorage depth for high tensile loads Base Material Concrete, in the compression zone Use Versatile fastening through in place parts like wood beams, metal sections, columns, brackets etc. Features Two anchorage depths for optimised use and high efficiency Safety from blue ring indicating large anchorage depth Special uses permitted by a long thread e.g. stand-off fastenings Base Material Concrete Hard natural stone Use For the medium load range; fastenings with bolts and threaded rods for plumbing; heating, air- conditioning and ventilation installations, pipe suspension, air ducts etc. forsecuring channels, rails, plates, brackets and suspended ceilings Material Bright galvanised steel
tension: from 3,2 to 21 kN shear: from 2,4 to 20,5 kN tension: from 1,9 to 8 kN shear: from 2,4 to 14,5 kN
A4 316
A4 316
Base Material Solid materials: concrete, bricks, sand lime blocks, P4.6 lightweight concrete Hollow materials: Bricks, sand lime blocks, cement ceilings slabs, lightweight concrete blocks Use Fastening pipes and cables, wood battens and components for electrical and pipefitting / plumbing installations Material High grade polyamide plastic Galvanised, steel drive screw, also available in A2 stainless steel (material 14303 / AISI 304 Base Material Concrete, solid bricks, sand-lime blocks Use Fastening through in place parts e.g. handrails, angles, brackets, timber parts Material Steel galvanised to 5 microns Features Bridging of gaps Wide range of applications in concrete, bricks etc.
HLC Sleeve anchors For general medium duty fastenings range from M6 to M20
A2 304 18
Base Material Concrete Hard natural stone Use Heavy duty fastening with small spacing and edge distances System Consisting of adhesive in a foil capsule and an anchor rod or internally threaded sleeve Features A strong foil capsule, adapts flexibility to fit in irregular holes. Capsules dont drop out of overhead holes
tension: from 10,9 to 194,1 kN shear: from 2,2 to 43,4 kN (solid brick)
Anchor systems
Concrete
Solid brick
Hollow brick
Type of cartridge
Hilti HIT-HY 150 for concrete, natural stone and brickwork Fastening without expansion pressure Versatile User friendly A complete system of matched component
Hilti HFX for everyday concrete, masonary & natural stone fixing
HAS
A4 316
HIS-N
HIT-IG
Hilti HY 70
HIT-AM
HIT-S
Installation systems
Application
Product
Trade
MP-HI
Band hanger for sprinklers pipe rings Quick locking systems with 3 stage safety closure Screw with combination cross recess, secured against loss
MP-SP
ML-C-20
ML-C-30
MQ-41
MQ-41D
ON SPECIAL REQUEST
Simple, compact and time saving Racking systems
ON SPECIAL REQUEST
20
Hilti Lifetime Hilti Lifetime Hilti Lifetime Hilti Lifetime Service Service Service Service
1Year
NO COSTS Lifetime
MANUFACTURERS
Hilti tools last. Our service too. First-class service for all Hilti tools.
WARRANTY
The main advantages of Hilti Lifetime Service are Maximum cost control Absolutely no costs for up to 1 year A clear repair cost limit thereafter Quick, straightforward procedure The annoying and time-consuming process of obtaining cost estimates becomes a thing of the past.
Hilti (South Africa) (Pty) Ltd I 72 Gazelle Avenue I Corporate Park I Midrand I T(011) 237 3000 Toll Free Fax 08000 119390 I www.za.hilti.com
I really do not know what I pay for repairs, but Im sure its a small
fortune and always unplanned
I pay everything upfront, but I do not get paid until three months
later
Up to 3 years
Guaranteed no additional costs for repair or replacement for up to 3 years Elimination of administrative work related to tool purchasing, repair quotations and accounting Clear tool assignment to employees, cost centres or job-sites, gives you more control and reduces unnecessary purchasing
Customized services for more productivity and flexibility Tool tracking efficient tool management Loan tools keeps you always productive in the event of a breakdown
Get started right away. Hilti high performance power tools plus the top service in the construction industry.
Hilti presents you a trade-specific selection of tools. Feel free to evaluate our offer and tailor the tools according to your needs. All tools are available under the Hilti Fleet Management program. Once you get started, you can easily add tools anytime. Building construction 1 Hilti TE 905 AVR breaker 1 Hilti TE 76 combi hammer 1 Hilti DC 230-S angle grinder 1 Hilti TE 16-M rotary hammer 1 Hilti DX 460 powder actuated fastening tool 1 Hilti WSC 85 1 Hilti PR 20 rotating laser 7 tools Monthly fee: R3,510* Mechanical / Electrical 1 Hilti TE 706 AVR breaker 1 Hilti TE 56 combi hammer 1 Hilti GX 100-E gas system 1 Hilti SF 151-A 3.0 Ah battery screwdriver 1 Hilti TE 6-S rotary hammer 1 Hilti DC 125-S angle grinder 1 Hilti PD 30 laser range meter 7 tools Monthly fee: R2,605*
* Prices are subject to change
Steel and Metal 1 Hilti DC125-S angle grinder 1 Hilti SF 151-A 3.0 Ah battery screwdriver 1 Hilti SR 16 power drill 1 Hilti TE 76 combi hammer 1 Hilti DC 230-S angle grinder 1 Hilti PD 32 laser range meter 6 tools Monthly fee: R1,854*
Interior finishing 1 Hilti SF 4000 drywall screwdriver 1 Hilti DX 460 powder actuated fastening tool 1 Hilti TE 2 rotary hammer 1 Hilti WSJ 750-EB jig saw 1 Hilti PD 30 laser range meter 1 Hilti PR 16 rotating laser 6 tools Monthly fee: R1,942*
All inclusive:
Hilti (South Africa) (Pty) Ltd I 72 Gazelle Avenue I Corporate Park I Midrand I T(011) 237 3000 Toll Free Fax 08000 119390 I www.za.hilti.com
Centres
Bloemfontein 120a Nelson Mandela Drive City Centre Westdene, Bloemfontein Contact No: 082 645 0458 Tel: (051) 430 3714 / Fax: (051) 430 4188 Toll Free: 08000 23331
Eco-Park - Centurion Eco Decor Shop 15B 300 Witch Hazel Street Highveld Park Ext 69 Centurion Contact No: 083 645 0465 Tel: (012) 661 3936 / Fax: (012) 661 3935 Toll Free: 08000 23331
Pietermaritzburg 332 Boom Street Pietermaritzburg Contct No: 083 669 8139 Toll Free: 08000 23331
Cape Town - Kenilworth 321 Main Road Kenilworth Contact No: 083 678 9055 Tel: (021) 761 3650 / Fax: (021) 761 3654 Toll Free: 08000 23331
George Shop 2 Bloemhof Centre York Street George Contact No: 078 802 8396 Tel: (044) 874 4279 / Fax: (044) 874 6027 Toll Free: 08000 23331
Port Elizabeth 28 West Street Newton Park, Port Elizabeth Contact No: 078 800 3087 (Ylando) 078 802 8390 (Bramley) Tel: (041) 364 3201 / Fax: (041) 364 3279 Toll Free: 08000 23331
Cape Town - Milnerton Marconi Centre Koeberg Road Milnerton, Cape Town Contact No: 083 645 0456 Tel: (021) 551 8606 / Fax: (021) 551 8605 Toll Free: 08000 23331
Hillfox Shop 23 Hillfox Power Centre Cnr Hendrick Potgieter & Alberts St Weltevreden Park Contact No: 083 645 0462 Tel: (011) 475 8792 / Fax: (011) 475 8392 Toll Free: 08000 23331
Richards Bay 83 Bullion Boulevard Richards Bay Contact No: 078 802 8392 Tel: (035) 789 4861 / Fax: (035) 789 4861 Toll Free: 08000 23331
Durban 2 Intersite Avenue 6a Umgeni Business Centre Umgeni Business Park, Durban Contact No: 082 886 5857 Farhaad 082 941 5127 Fax: (031) 263 1908 Toll Free: 08000 23331
Meadowdale C/R Hyperama Superlink & Herman Streets Shop 05A, Value Centre Meadowdale Contact No: 083 678 9067 Tel: (011) 454 6020 / Fax: (011) 454 6021 Toll Free: 08000 23331
Sandton Unit 2 Cnr Katherine & Grayston Drive Sandton 2146 Contact No: 011 262 3740 Toll Free: 08000 23331
East London 17 Bowls Road Arcadia East London Contact No: 082 941 5120 Tel: (043) 743 6382 / Fax: (043) 722 7723 Toll Free: 08000 23331
Nelspruit 10 Silvia Street Nelspruit Contact No: 078 802 8395 Toll Free: 08000 23331
Hilti (South Africa) (Pty) Ltd I 72 Gazelle Avenue I Corporate Park I Midrand I T(011) 237 3000 Toll Free Fax 08000 119390 I www.za.hilti.com