Professional Documents
Culture Documents
WB Series
Features
Push-to-Connect allows for quick, easy connections by eliminating the need to retract the sleeve to couple Locking collets in the female half maintain 360 degree contact with male half to evenly distribute load and reduce brinelling. Zinc plating with yellow chromate finish resists corrosion. Straight through design allows for excellent flow with low pressure drop. Sleeve Lock design prevents accidental disconnects. Two knurled bands on the sleeve provide good gripping for operation of sleeve to disconnect. Stainless steel collets resist corrosion and provide smooth latching action.
Applications
Parkers WB Series couplings are designed for equipment used for cleaning applications such as paint removal or mill scale. The 10,000 psi operating pressure of the WB series makes it ideal for applications that require a high pressure coupling with minimal pressure drop.
Polymyte backup washer ensures sealing integrity at high pressure. Heat treated components to reduce wear and brinelling. Sleeve guard prevents accidental disconnect and protects the opening between the sleeve and the body from the environment.
Materials Of Construction
Body: Finish: Valve: Seal: Steel Zinc plated with yellow chromate finish NoneStraight through Buna-N (Nitrile) with backup washer (female half only)
Pressure Drop in PSID
100
Performance
WB Series (1/2")
Test Fluid: Oil - SUS 200
100
Specifications
Body Size (in.) Max Operating Pressure (PSI) Rated Flow (GPM) Temperature Range (std seals) 1/2 10,000 45 -40 to +250F
10
1/2"
10
1 1 10
1 100
Flow in USGPM
Coupler
A
Part Number
Thread Size
Overall Length
Hex Size
Largest Diameter
B 1.25
C 1.62
Nipple
Body Size (in.) Part Number Thread Size Overall Length Exposed Length Hex Size Largest Diameter
F E D
1/2
D 2.35
E 1.26
F 1.12
G 1.62
B-59
Optional Seals Suffix* No suffix is required when ordering products with the standard Buna-N (Nitrile) seals. When specifying an optional seal, refer to the following chart to determine the appropriate suffix.** Coupling Series 60 Series 6600 Series SM Series HP Series 4000 Series 4200 Series NS Series NC Series FF Series
Std. is E49 (BFT)
Ethylene Propylene W W E5 E5 W W E5 E5 E5 E5 E5 E5 W W W W
Fluorocarbon Y Y E4 E4 Y Y E4 E4 E4 E4 E4 STD Y Y Y Y
Neoprene Perfluoroelastomer Z Z E12 E12 Z Z E12 E12 E12 E12 E12 E12 Z Z Z Z -264 -264 E47 E47 N/A N/A E47 E47 E47 E47 E47 E47 N/A N/A N/A N/A
FE Series FH Series FS Series 6100 Series 5000 Series 8200 Series 9200 Series 3000 Series TC Series 1141 Series ST Series Water Service WB Series HO Series Moldmate Series
Std. is Silicone
Available with Polyurethane only (no suffix needed) Available with Fluorocarbon only (no suffix needed) Available with Polyurethane only (no suffix needed)
W E5 E5 N/A
Y E4 E4 Y***
*To select proper seal materials, see Fluid Compatibility Chart in Appendices section, or contact your Parker Quick Coupling Distributor. **N/A = Not Available; STD = Standard (No Suffix Needed) *** Viton seal available for use only with oil based media, not water glycol.
B-64