Professional Documents
Culture Documents
B ENGINE
A
SECTION
ACC
CONTENTS
ACCELERATOR CONTROL SYSTEM ................. ..... 2 Removal and Installation ..................................... ..... 2 QR20DE ........................................................... ..... 2 YD22DDTI ........................................................ ..... 2 REMOVAL ........................................................ ..... 2 INSTALLATION ................................................ ..... 3 INSPECTION AFTER INSTALLATION ............ ..... 3 SERVICE DATA AND SPECIFICATIONS (SDS) ... ..... 4 Tightening Torque ................................................ ..... 4
ACC-1
KBIA0307E
YD22DDTI
SBIA0120E
REMOVAL
1. Remove harness connector. 2. Loosen nuts, and remove accelerator pedal assembly. CAUTION: G Do not disassemble the accelerator pedal assembly. Do not remove the sensors and the switches from the assembly. G Avoid impact from dropping etc. during handling. G Be careful to keep the assembly away from water.
ACC-2
Do not adjust the adjusting screw (painted white) of the accelerator work unit. (YD22DDTi) When the harness connector of the accelerator sensor is disconnected, perform Accelerator Pedal Released Position Learning. Refer to Basic Service Procedure in EC section.
INSTALLATION
Install in the reverse order of removal.
ACC
Check that the accelerator pedal moves smoothly within the whole operation range. Check that the accelerator pedal securely returns to the original position. For the electrical inspection of the accelerator pedal assembly, refer to EC-154, "DTC P0121 APP SENSOR" (WITH EURO-OBD) and EC-484, "DTC P0121 APP SENSOR" (WITHOUT EURO-OBD). (QR20DE) For the electrical inspection of the accelerator work unit, refer to EC-715, "DTC P0120 ACCELERATOR PEDAL POSITION SENSOR" and EC-783, "DTC P1510 ACCELERATOR PEDAL RELEASED POSITION SWITCH" . (YD22DDTi) Check that the drum of the accelerator work unit can be fully opened. (YD22DDTi)
ACC-3
SERVICE DATA AND SPECIFICATIONS (SDS) SERVICE DATA AND SPECIFICATIONS (SDS) Tightening Torque
Accelerator pedal assembly Accelerator pedal assembly (work unit) (YD22DDTi) Accelerator pedal bracket (YD22DDTi) 4.3 - 5.9 (0.44 - 0.60, 39 - 52) 4.3 - 5.9 (0.44 - 0.60, 39 - 52) 4.3 - 5.9 (0.44 - 0.60, 39 - 52)
PFP:00030
EBS003CI
ACC-4