Professional Documents
Culture Documents
Design
Utilities
For
Optimum
Efficiency
Reduce
Time
To
Market
The P.T.E.Consultancy
Run by a team of specialized engineers, P.T.E. operates in the field of design and m anufacturing, covering
all aspects of m anufacturing process At P.T.E. Consultancy, we do detail engineering
plant utility
of all
needs.O ur scope includes:
• Feasibility A nalysis.
• A ssessm ent of plant utility needs.
• D esign & Selection of adaptors and m odifications of cable box for H V cable system s.
• Equipm ent layout drawings with equipm ent specifications .
• Detailed Bill of M aterials and specification data sheets.
• M anufacturing of C ustom er based product design.
• M anufacturing for fabricated equipm ent such as S teel S tructures, S teel S upports, C lam ps, Link B oxes, A daptors, Take O ff B olt & C orona S hield.
Product Range
LINK BOX Features
• Compact design
Link boxes are used with cable joints and
• Stainless steel
terminations to provide easy access to
• Hermetically sealed
shield breaks for test purposes and to
• 1-phase and 3-phase boxes
limit voltage build up on the sheath.
• Sheath voltage limiters (SVL)
Lightning, fault currents and switching
operations can cause overvoltages on
the cable sheath. The link box optimizes
loss management in the cable shield on
cables grounded both sides.
Mechanical design
• Made of stainless steel
• Compact design
• 1-phase and 3-phase link boxes
• Hermetically sealed
- Resists water pressure up to 1 bar
(20 psi)
- Lugs and bonding cables are
heatshrink
sealed inside and outside
ADAPTORS
Design & Manufacturing as per clients
requirement.
Application in GIS and Transformer cable
boxes.
SPARE ACCESSORIES
We also undertake design and manufacturing of special products
for batch spares including bushings, take off bolt, corona shield
and other products as per Client Specifications.
STEEL STRUCTURES
We design and manufacture all types of
steel supports and steel structures and
also commission installation works for
power plants and transmission
substations.
CABLE TRAYS
• Manufactured by new technology of
punching, drawing and continuous
rolling of production line.
• Main features is the low weight and
high strength saving 30% as compared
to traditional products.
• Made of common steel sheet or as per
client requirement.
• Inner packing of thin PE bag or as per
client requirement.
At PTE the process begines with design engineers equipped by state of the
art CAD/CAE softwares ensuring a successful manufacturing process with
close concern to quality of the product. Our Quality and Laboratory Testing
division closely monitors procedures and calibration records for test
equipments which are timely updated at par with IEC Standards.
P.T.E
Address : P.O. Box 8234, Jeddah 21482
Tel : 02 – 6095203
Fax : 02 – 6095165
Email : sales@pte-sa.com