Freecall: 1800 679 922 www.nulon.com.au info@nulon.com.au 75W-85 Smooth Shift Manual Gearbox & Transaxle Oil Nulon Full Synthetic75W-85 Smooth Shift Manual Gearbox & Transaxle Oil (SYN75W85) is an extreme pressure API GL-4 fully synthetic gear oil, with superior high temperature stability when compared to conventional mineral gear oils. Ideal for use in transaxle applications with combined manual gearbox and differential. Nulon SYN75W85 is formulated using hydrofnished base fuids with superior additive packages to enhance wear protection, corrosion protection, seal compatibility and low temperature characteristics. The optimized formulation has optimum oxidation and thermal stability to ensure fuid durability and performance during its life time. The hydrofnished base oils used in SYN75W85 are Very High Viscosity Index (VHVI) base fuids that have advantages of low volatility for better oil consumption, low wax content for improved low temperature fuidity, high saturates level for excellent thermal and oxidation stability, and low sulfur and aromatic compounds for better environment friendliness. Nulon SYN75W85 is designed mainly for manual transmission and transaxle application where API GL-4 is recommended. It is intended for use in axles with spiral bevel gears under moderate to severe speed and load conditions. It can also be used for axles with hypoid gears under moderate speeds and load conditions. Nulon SYN75W85 may be used in selected manual transmission and transaxle application where API MT-1 lubricants are not suitable. For enhanced anti-wear performance use Nulon G70 Manual Gearbox & Diff Treatment. Benefts and Features Reduces gearshift baulking in cold temperatures Excellent wear reduction and good friction behaviour High thermal and oxidation stability for longer life Superior oil flm strength for excellent protection Better low temperature performance High viscosity index for better performance at high operating temperature Good corrosion protection and rust prevention for longer component life Applications Transaxles with combined manual gearbox and hypoid differential where API GL-4 is required. Passenger cars, towing vehicles, 4x4, light commercial vehicles Spiral bevel gears and hypoid gears operated under moderate speed and moderate load Manual transmissions experiencing gearshift baulking during cold temperature when using mineral based API GL-4 gear oil. Selected manual transmissions and transaxles where API MT-1 are unsuitable Typical Characteristics SYN75W85 SAE Viscosity Grade 75W-85 KV @ 100C, cSt 12.50 KV @ 40C, cSt 73.00 Viscosity Index 173 Density @ 15C, kg/l 0.8650 Pour Point, C -42 Brookfeld Viscosity @-40C, cP 105000 Due to continued product research and development, the information contained in this Product Bulletin is subject to change without notifcation Health and Safety Avoid prolonged skin contact with used oils. Wear suitable gloves. If skin contact occurs wash immediately with soap and water. Protect the environment. Do not pollute drains, ground or water with used oils. Dispose of container as per local EPA guidelines. Do not use this container for fuel or solvents. Suitable for use where the following specifcations are required American Petroleum Institute GL-4 US Military MIL-L-2105 Ford ESW-M2C-83A/B, ESP- M2C-83, WSD M2C200-C General Motors HN 1046, 1070, 1820, 1855, 2276 Mercedes Benz 235.1 Packaging: 1 litre bottle (6 bottles per carton) * Part No: SYN75W85-1 4 litre bottle (3 bottles per carton) * Part No: SYN75W85-4 20 litre drum (single units) * Part No: SYN75W85-20 Full Synthetic Full Synthetic