This report plan is for a group project on liquefied natural gas in Nigeria. It will discuss manufacturing methodologies including the acid gas removal, dehydration, mercury removal, liquefaction, fractionation, and condensate stabilization units. It will also cover maintenance topics such as relief valve removal and installation, smith lock repair, MOV greasing, and mechanical seal replacement. The report will include a section on occupational health and safety addressing hazardous wastes, emissions, noise, discharges, and sewage. It will also describe the design of various areas. Keywords to be included are BOD, BCOT, LNG, HSE, HRA, HIA, HFE, ESD, and
Original Description:
1 Introduction
2 Manufacturing methodologies
Acid gas removal unit (U1100)
Dehydration unit (U1200)
Mercury removal unit (U1300)
Liquefaction unit (U1400)
Fractionation unit (U1500)
Common fractionation unit (U2500)
Condensate stabilization unit (U2000)
3 Maintenance
Removal and Installation of Relief Valves
Smith lock repair
MOV greasing
ERS hose replacement
Mechanical seal replacement
4 Occupational Health and Safety
Hazardous wastes
Emissions to air
Noise measurements
Discharges to water
Sewage treatment & disposal
This report plan is for a group project on liquefied natural gas in Nigeria. It will discuss manufacturing methodologies including the acid gas removal, dehydration, mercury removal, liquefaction, fractionation, and condensate stabilization units. It will also cover maintenance topics such as relief valve removal and installation, smith lock repair, MOV greasing, and mechanical seal replacement. The report will include a section on occupational health and safety addressing hazardous wastes, emissions, noise, discharges, and sewage. It will also describe the design of various areas. Keywords to be included are BOD, BCOT, LNG, HSE, HRA, HIA, HFE, ESD, and
This report plan is for a group project on liquefied natural gas in Nigeria. It will discuss manufacturing methodologies including the acid gas removal, dehydration, mercury removal, liquefaction, fractionation, and condensate stabilization units. It will also cover maintenance topics such as relief valve removal and installation, smith lock repair, MOV greasing, and mechanical seal replacement. The report will include a section on occupational health and safety addressing hazardous wastes, emissions, noise, discharges, and sewage. It will also describe the design of various areas. Keywords to be included are BOD, BCOT, LNG, HSE, HRA, HIA, HFE, ESD, and
Report Plan (relevant headings, sub-headings, keywords; use point forms; include references; etc)
Extend to next page if necessary. Submit Week 6 Tuesday 10:30 Liquied natural gas in Nigeria: Manufacturing methodologies, Maintenance, Design & Occupational Health and Safety Ibrahim Khalil Hussaini 4241606 Assen Aqthar Abdul Jabbar 4323927 x Manufacturing methodologies x Maintenance x Occupational Health and Safety x Design 1 Introduction 2 Manufacturing methodologies Acid gas removal unit (U1100) Dehydration unit (U1200) Mercury removal unit (U1300) Liquefaction unit (U1400) Fractionation unit (U1500) Common fractionation unit (U2500) Condensate stabilization unit (U2000) 3 Maintenance Removal and Installation of Relief Valves Smith lock repair MOV greasing ERS hose replacement Mechanical seal replacement 4 Occupational Health and Safety Hazardous wastes Emissions to air Noise measurements Discharges to water Sewage treatment & disposal 5 Design Area A Area B Area C Area D Area E 6 Conclusion Keywords:- BOD - Basis of Design BCOT - Bonny Crude Oil Terminal LNG - Liqueed natural gas HSE - Health, Safety And Environment HRA - Health Risk Assessment HIA - Health Impact Assessment HFE - Human Factors Engineering ESD - Emergency shutdown EDP - Emergency depressurisation