Professional Documents
Culture Documents
Edition 1, 2003
Identification no.
02 05 03 01 004 0 000001
Version no. 0010
Igas-K
Igas - K
Construction
Uses
Igas-K is used in particular for the sealing joint of concrete pavement. Where fuel
resistance is required, such as :
Aircraft hardstandings
Parking aprons and hangars
Concrete roads and parking areas
Multi storey car parks
Re-fuelling areas
Stores for fuel oils
Advantages
Joint Configuration
All surfaces must be clean, dry and free from all loosely adhering particles.
Priming is not required
Igas-K should be heated in controlled oil bath to a temperature of 150oC - 160oC.
(Note: Do not heat with direct flame)
Application
After heating, installation is carried out by the melter-pourer and for small areas with
a lipped bucket.
Cleaning
Clean all tools and equipment immediately after use with Colma-Cleaner.
Limitations
Back
Table of Contents
Igas -K
1/2
Construction
Technical Data
Basis
Colour
Black
Density
Movement Capacity
+120 C to +140 C
Service Temperatures
-20oC to 70oC
Shelf life
Storage
Packaging
30 kg pails
Legal Notes
The information, and, in particular, the recommendations relating to the application and end-use of Sika
products, are given in good faith based on Sikas current knowledge and experience of the product when
properly stored, handled and applied under normal conditions in accordances with Sikas
recommendations. In practice, the differences in materials, substrates and actual site conditions are such
that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising
out of any legal relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the product must test the products
suitability for the intended application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which will be supplied on request.
Branches
Surabaya :
Puri Niaga Blok G No. 29, Jl. Raya Rungkut Menanggal 11, Surabaya
Tel : 031-8690202 ; Fax : 031-8682123
Medan :
Kawasan Industrial " Medan Star ", Tanjung Morawa Km.19,2
Jl. Pelita Raya Blok R No.32, Deli Serdang 20362
Tel : 061-7941200 ; Fax : 061-7940822
Batam :
Jl. Laksamana Bintan,Komp. Bumi Riau Makmur Blok E No.3,
Sungai Panas, Batam
Tel : 0778-424928 ; Fax : 0778-450189
Igas -K
2/2