Professional Documents
Culture Documents
Table of contents
Topic 1, Main (158 Questions)............................................................................................4
When setting up a data center, how would you install an HP Modular Cooling System?
Select TWO.
A. as an option inside an existing HP 10000 G2 series rack
B. as an option inside a new HP 5000 series rack
C. in a datacenter with at least 59" (150cm) clearance around the rack
D. adjacent to any third party rack
E. as a stand alone solution
Answer: D,E
QUESTION NO: 9
Which online utility changes the cache read/write ratio settings on a SmartArray 6404
controller?
A. Array Diagnostic Utility (ADU)
B. Array Configuration Utility (ACU)
C. Array Management Utility (AMU)
D. Options ROM Configuration for Arrays (ORCA)
Answer: B
QUESTION NO: 10
Your customer complains that even during idle time the server Ultra320 SCSI hard drives
are working. They are worried that it may cause performance problems. What will you
tell this customer?
A. The hard drive activity is caused by the Dynamic Sector Repair feature and it has no
impact on performance.
B. The hard drive activity is caused by the internal backup process of RAID configuration
and the impact on performance is minimal.
C. The server has postponed writes from previous day which causes hard drive activity
and huge impact on performance.
D. The server is performing Drive Protection System tests and, depending on drive speed
and type, the impact on performance might be huge.
Answer: A
QUESTION NO: 11
Which ProLiant servers are covered by HP pre-failure warranty? Select TWO.
A. DL380
B. DL580
C. ML150
D. DL145
Answer: A,B
QUESTION NO: 12
Where do you install the ProLiant Support Pack when using the Linux Deployment
Utility?
A. on all Linux servers on the network
B. on all servers on the same subnet
C. on both local and remote Linux servers
D. only on the local server
Answer: D
QUESTION NO: 13
Which components are installed when you remotely deploy the HP ProLiant Support
Pack from the HP SmartStart CD? Select THREE.
A. WBEM agent for operating system
B. HP Systems Insight Manager
C. System Management Homepage
D. Insight Management Agents
E. HP Instant Support Enterprise Edition
F. Adapters drivers and utilities
Answer: C,D,F
QUESTION NO: 14
Which operating system is required to configure Microsoft Cluster Services (MSCS)
solutions?
A. Microsoft Windows 2003 SBS Edition
B. Microsoft Windows 2003 Web Edition
C. Microsoft Windows 2003 Enterprise Edition
D. Microsoft Windows 2003 Standard Edition
Answer: C
QUESTION NO: 15
What provides Windows support to WBEM applications?
Your customer is looking for an ultra dense High Performance Cluster. Which ProLiant
family should the cluster be based on?
A. ML
B. DL
C. CL
D. BL
Answer: D
QUESTION NO: 20
Which tool allows you to manage HP SmartArray Controllers and HP StorageWorks
MSA500?
A. CommandView MSA
B. Array Configuration Utility
C. SmartArray Manager
D. CommandView SA
Answer: B
QUESTION NO: 21
Your customer is looking for an ultra dense High Performance Cluster. Which ProLiant
family should the cluster be based on?
A. DL
B. BL
C. CL
D. ML
Answer: B
QUESTION NO: 22
Which tool is used to compare different server configuration snapshots?
A. Inspect utility
B. Insight Diagnostics Online edition
C. Insight Diagnostics Offline edition
D. Integrated Management Log viewer
Answer: B
QUESTION NO: 23
You want to install an HP StorageWorks DAT72 drive into the internal media bay of an
HP ProLiant ML370. Which feature is now available to the customer if an operating
system disaster happens?
A. One Button Disaster Recovery
B. Snapshot backup and restore
C. Fast Recovery option
D. Zero Downtime Backup and Restore
Answer: A
QUESTION NO: 24
Which remote management capability is available in the HP ProLiant series to enable
customers to access, control and troubleshoot server hardware?
A. Windows Management Interface
B. Web-based Enterprise Management
C. Remote KVM switch
D. Integrated Lights Out (iLO) or iLO 2
Answer: D
QUESTION NO: 25
What differentiates the HP BladeSystem from HP ProLiant DL-series servers?
A. easier deployment with a higher cost for management
B. distributed infrastructure architecture
C. consolidation of processors and memory for a scalable SMP system
D. consolidation of power, cooling, network and management
Answer: D
QUESTION NO: 26
The administrator of HP Systems Insight Manager (HP SIM) informs you that no traps
arrived into HP SIM after installing HP Management Agents on your new ProLiant
DL380 G4 running SuSE Linux. Why didn't the traps arrive into HP SIM? Select TWO.
A. The version of the Management Agents you installed do not match the HP SIM
version.
B. The HP SIM server is not licensed to receive traps from SuSE Linux servers.
C. The SNMP community name is not configured.
D. The trap destination is set incorrectly.
QUESTION NO: 34
Which settings provide secure access to the HP System Management Homepage from the
management LAN? Select TWO.
A. Public and Private Key
B. IP Binding List
C. Local SSL certificate
D. IP Access Restriction
E. Public SSL certificate
Answer: B,D
QUESTION NO: 35
Which product provides the tools needed to receive proactive notification of potential
bottleneck conditions and debug existing performance issues?
A. Workload Management Pack
B. HP Insight Diagnostics
C. Performance Management Pack
D. Vulnerability and Patch Management Pack
Answer: C
QUESTION NO: 36
You want to connect an HP StorageWorks MSA20 enclosure directly to your HP ProLiant
DL385 system. Which SmartArray controller do you need?
A. SmartArray 5i Plus
B. SmartArray 641
C. SATA RAID Controller
D. SmartArray 6404
Answer: D
QUESTION NO: 37
After an array expansion you discover some problems with the storage subsystem. Which
HP tool diagnoses the Smart Array controller and all disks connected to it?
A. ROM Based Setup Utility (RBSU)
B. Array Configuration Utility (ACU)
C. Array Diagnostic Utility (ADU)
D. Option ROM Configuration for Arrays (ORCA)
Answer: C
QUESTION NO: 38
Where can you check the system ROM version of a ProLiant DL580 G3, prior to
upgrading to the latest version?
A. ROM Based Setup Utility (RBSU)
B. Management Processor (MP)
C. Server Configuration Utility (SCU)
D. Option ROM Configuration for Arrays (ORCA)
Answer: A
QUESTION NO: 39
Which utilities can be used to identify an outdated firmware version of a SmartArray
controller? Select TWO.
A. Array Configuration Utility
B. System Erase Utility
C. Array Diagnostics Utility
D. System Management Homepage
E. Integrated Management Log
Answer: A,C
QUESTION NO: 40
Which ProLiant Essentials Pack gathers utilization statistics to support your
recommendation for additional processors?
A. Vulnerability and Patch Management Pack
B. Rapid Deployment Pack
C. iLO Advanced Pack
D. Performance Management Pack
Answer: D
QUESTION NO: 41 DRAG DROP
You are designing a server-storage solution using a single SmartArray 6404 in a ProLiant
DL380 G4. The customer wants the highest availability, performance and protection
against single SCSI bus failure; with utilization of total raw capacity above 70%.
Logical Volume: C:\ for Windows OS - Size: 20GB usable capacity on RAID 1+0 on
internal storage
Logical Volume: D:\ for DVD-ROM
Logical Volume: E:\ for swapfile (pagefile.sys) - Size: 32GB usable capacity on RAID
1+0 on internal storage
Logical Volume: F:\ for applications program - Size: 35GB usable capacity on RAID
ADG
Logical Volume: G:\ for application data - Size: 350GB usable capacity on RAID 1+0
Using drag and drop, match the correct types of RPM and capacity with the internal and
external storage locations for the above scenario.
QUESTION NO: 42
Which tool should you use to deploy a new version of a ProLiant Support Pack (PSP) to a
server that can only be rebooted during a scheduled maintenance period?
A. Remote Deployment Utility (RDU)
B. Remote Batch Utility (RBU)
C. Platform Administration Tool (PAT)
D. Pre-operating system eXEcution (PXE)
Answer: A
QUESTION NO: 43 DRAG DROP
HP developed a six-step troubleshooting methodology.
Place the steps in the correct order.
QUESTION NO: 44
A Site Survey is useful to determine which options? Select TWO.
A. the load placed on the current electrical system
B. the type of disk storage needed in the server
C. the Operating System to be installed on the Server
D. the memory requirements of the server
E. the location of where the server will be installed
Answer: A,E
QUESTION NO: 45
Which feature differentiates the HP SmartArray 6404 from the HP SmartArray 6i on a HP
ProLiant DL380?
A. Online migration
B. Online expansion
C. RAID 1+0
D. RAID 6 (ADG)
Answer: D
QUESTION NO: 46
Which tools can be used to set a SmartArray controller as a bootable controller? Select
TWO.
Answer: C
QUESTION NO: 54
Which component is required in an HP Rack to control the power source to each ProLiant
server by segmenting them to a smaller section? For example, you have 40 units of
DL145 in a 42U rack, segmenting them into a smaller segment of 6-8 servers each.
A. Power Distribution Unit (PDU) Management Module
B. Earth Leakage Circuit Breaker (ELCB)
C. Easy Access Button (EAB) software
D. Power Distribution Module (PDM)
Answer: D
QUESTION NO: 55
Which TCP port is used as the default port to access the System Management Homepage?
A. 50000
B. 3257
C. 80
D. 2381
Answer: D
QUESTION NO: 56
You have just added an HP RILOE II remote management adapter into the ML350 server.
What must you change in order to enable it to integrate into Microsoft Windows Server
2003?
A. Configure SNMP community name on SNMP services on Windows.
B. Install Remote IPMI Agent on Microsoft Networking services in Windows Control
Panel.
C. Remove Remote WMI support on Microsoft Windows operating system.
D. Activate Remote Insight Information Agent under HP Management Agents in
Windows Control Panel.
Answer: D
QUESTION NO: 57
Which feature in HP Systems Insight Manager (HP SIM) will allow you to update
multiple servers with Version Control Agent (VCA) settings?
QUESTION NO: 61
Your customer wants to implement a storage solution where disk performance is as
important as data availability. Which RAID level should you recommend?
A. RAID 6 (ADG)
B. RAID 0
C. RAID 5
D. RAID 1+0
Answer: D
QUESTION NO: 62
Which HP Premium Software/Hardware support Care Pack provides on-site hardware
support and over-the-phone software support; 13 hours per day and 5 days per week?
A. Support Plus 24
B. Support Plus
C. Critical Service
D. Proactive 24
Answer: B
QUESTION NO: 63
You need to deploy an array set with 2 logical volumes across a total of 35 disk drives
using MSA30 storage enclosures. Which HP SmartArray controller would you use to
support the array set with maximum protection?
A. SmartArray P600
B. SmartArray 642
C. SmartArray 6404
D. SmartArray 6402
Answer: C
QUESTION NO: 64
Which features does HP Intelligent Networking Pack provide? Select TWO.
A. Automatic Virus cleaning
B. Fast Path failover
C. Fabric Tree support
D. Dual Channel teaming
E. Fast EthernetChannel
Answer: B,D
QUESTION NO: 65
Which RAID level would you suggest when I/O performance and fault tolerance are very
important?
A. RAID 5
B. RAID 0
C. RAID 1+0
D. RAID 6 (ADG)
Answer: C
QUESTION NO: 66
When setting up disks on a SmartArray controller, when should you change the default
stripe size setting to a larger value? Select TWO.
A. when the application is performing an equal number of reads and writes
B. when the application is primarily writing to disk on RAID 5
C. when the application is performing random read/write to disk
D. when the application is primarily writing to disk on RAID 1+0
E. when the application is primarily performing sequential reads
Answer: D,E
QUESTION NO: 67
How do you configure Online Spare Memory in the ProLiant 300 series?
A. by setting the correct switch on the system board
B. by installing the correct driver from the ProLiant Support Pack
C. by entering the license key for Online Spare Memory in RBSU
D. by enabling the option in the ROM Based Setup Utility (RBSU)
Answer: D
QUESTION NO: 68
You want to add an external storage enclosure to your ProLiant ML370 and there is only
1U of space available in your rack. Which enclosure would you select?
A. MSA50
B. MSA500
C. MSA30
D. MSA20
Answer: A
QUESTION NO: 69
What are the advantages of software-based RAID over hardware-based RAID? Select
TWO.
A. lower cost to deploy
B. support for online spare drives
C. better performance
D. the ability to span multiple host controllers (duplexing)
E. faster and more reliable
Answer: A,D
QUESTION NO: 70
The System Management Homepage uses which type of user interface?
A. web-based
B. console
C. serial
D. command line
Answer: A
QUESTION NO: 71
You are not able to modify the thresholds on the file system space used on your ProLiant
server using the HP Insight Management agents. The server is running Windows 2003.
What could be the cause?
A. The SNMP community is set to READ only.
B. The management agent account is not linked to the administrative account of the OS.
C. The file system is created on dynamic disks.
D. The management agents are configured as READ only.
Answer: A
QUESTION NO: 72
Which tool identifies the reason for a bottleneck on a ProLiant DL385?
Answer: C
QUESTION NO: 80
What is the best location to install a R3000XR UPS in a rack?
A. below the keyboard drawer for easier access
B. in the rack, at the top to save space for heat dissipation
C. the bottom of the rack for more stability
D. above the keyboard drawer for easier cable installation
Answer: C
QUESTION NO: 81
You need to deploy a solution that will enable you to proactively monitor and receive
failure alerts through email for 45 ProLiant servers, 15 Modular Smart Array's and a few
HP LaserJet network printers. Which software components enable you to do this? Select
THREE.
A. HP Workload Management Pack
B. HP ProLiant Support Pack
C. HP GlancePlus Pack for Windows
D. SMTP Mail Server
E. HP Systems Insight Manager
Answer: B,D,E
QUESTION NO: 82
An IT administrator is considering using Instant Support Enterprise Edition (ISEE). What
are some features of ISEE? Select THREE.
A. continuous event monitoring
B. remote diagnostic and troubleshooting
C. forwarding alerts to multiple HP SIM servers
D. automatic download of patches from HP website
E. automated event notification to HP
Answer: A,B,E
QUESTION NO: 83
Your customer is looking for an economic backup solution. They currently have 6GB of
data and data growth is about 1% per year. Which technology should you recommend to
this customer?
A. SDLT
B. DAT
C. AIT
D. LTO
Answer: B
QUESTION NO: 84
Your customer bought a new DL580 ProLiant server. What is the standard warranty for
this server?
A. 1-0-0
B. 1-1-1
C. 3-3-3
D. 3-1-1
Answer: C
QUESTION NO: 85
How can you verify a processor upgrade is functional on a ProLiant BL p-series server
before you return it to service?
A. Use Rapid Deployment Pack.
B. Use the blade diagnostics station.
C. Use the System Management Homepage.
D. Use HP Insight Diagnostics Offline Edition.
Answer: B
QUESTION NO: 86
Your customer is looking for a shared storage solution that supports up to four different
servers. Two servers are clustered and two are standalone servers. What is the best
solution for this customer?
A. MSA20
B. MSA30
C. MSA500 G2
D. MSA50
Answer: C
QUESTION NO: 87
What should you do if you want to attach 20 small form factor (SFF) SAS or SATA
drives to your ProLiant DL380?
A. cascade two MSA50
B. cascade two MSA20
C. cascade two MSA30
D. cascade one MSA20 and one MSA50
Answer: A
QUESTION NO: 88
Which tool helps to isolate a performance bottleneck in the network subsystem on a
Microsoft Windows Server?
A. System Monitor
B. mpstat
C. System Management Homepage
D. iostat
Answer: A
QUESTION NO: 89
A ProLiant server locks up and restarts frequently. What should you do before replacing
any parts?
A. Update the system and options ROM.
B. Restore the last known good backup.
C. Disable ASR in the ROM Based Setup Utility (RBSU).
D. Re-install the server's operating system.
Answer: A
QUESTION NO: 90
How does HP Systems Insight Manager receive detailed event messages about MSA
storage devices? Select TWO.
A. Fibre Channel signaling
B. PPP communications
C. SMTP messaging
D. SNMP traps
E. WBEM events
Answer: D,E
QUESTION NO: 91
Which level of indication in the Version Control Agent (VCA) log file shows that a
feature of VCA might be incorrectly configured?
A. Major
B. Warning
C. Informational
D. Normal
Answer: B
QUESTION NO: 92
The operating system utilization monitor indicates that there is high utilization on the
system processor. Which action should you take next?
A. Remove any unnecessary applications.
B. Upgrade to a faster processor.
C. Add a second processor to balance the CPU utilization on the ProLiant server.
D. Use Performance Management Pack (PMP) to check memory and network utilization.
Answer: D
QUESTION NO: 93
Which utility is used to download new drivers, firmware and ProLiant Support Pack from
the Internet?
A. HP Insight Softpaq Manager
B. HP System Management Homepage
C. Version Control Repository Manager
D. HP ProLiant Insight Downloader
Answer: C
QUESTION NO: 94
Your customer is looking for a ProLiant server to run Microsoft SQL Server. Which HP
tool can be used to select the best hardware platform for this application?
A. Microsoft SQL Configurator
B. HP Best Practices and Solution website
C. Solution Sizer from ActiveAnswers
D. memory
E. hard disk drive
Answer: A,D,E
QUESTION NO: 103
What type of remote management capability is offered as an add-on to the HP ProLiant
DL-series and BL-series servers?
A. RILOE II with only DHCP support license
B. Standard iLO
C. RILOE II Advanced Pack license
D. iLO Advanced Pack license
Answer: D
QUESTION NO: 104
Your customer wants to utilize his existing SCSI drives and IP network infrastructure to
implement a small SAN. Which storage solution would you recommend?
A. MSA1000
B. MSA 30
C. MSA1510i
D. MSA1500cs
Answer: C
QUESTION NO: 105
What information is saved in the Integrated Management Log (IML)?
A. installed firmware
B. memory configuration
C. network link status
D. raid configuration
Answer: C
QUESTION NO: 106
Which HP software solution is used to find potential security problems within Windows
or Linux operating systems and applies the appropriate hot-fixes from the operating
system vendor?
Prior to installing the Fibre Channel Adapter (FCA) into the ProLiant server, what should
you gather from the adapter in order to simplify the installation and security
implementation for the SAN environment?
A. FCA chipset
B. ALPA address
C. World-wide name (WWN)
D. adapter serial number
Answer: C
QUESTION NO: 115
You are installing HP SIM on an HP workstation running Windows XP Professional. All
the managed servers are running Red Hat Enterprise 3.0. Which additional software must
be installed?
A. Linux interface layer for XP
B. HP Management Agents for workstations
C. WMI Mapper
D. MSDE 2000 SP3a
Answer: D
QUESTION NO: 116
Which combination of tools should be used to provide information to support an HP
ProLiant prefailure warranty claim? Select THREE.
A. HP Insight Management Agents for HP ProLiant
B. HP Insight Diagnostic (Online and Offline)
C. HP Smart Setup Enterprise Edition
D. HP OpenView Network Node Manager
E. HP System Management Homepage
Answer: A,B,E
QUESTION NO: 117
What would be your next step after installing Microsoft Windows Server 2003 on your
ProLiant DL380 G4 using the newest version of SmartStart?
A. upgrade the system and options ROMs
B. install the HP approved drivers for the Operating System
C. test all fault tolerant features like NIC teaming, redundant power supplies, etc
D. write the scope of work
Answer: C
QUESTION NO: 118
What happens on a SATA disk when you click the "flash LED" button in the "Status" tab
of Insight Diagnostics?
A. It will update the LED firmware of the hard drive.
B. It will turn on the drive's front panel blue LED.
C. It will turn on all drive's front panel LEDs.
D. It will turn on the drive's front panel amber LED.
Answer: B
QUESTION NO: 119
Your customer requires a 3U rackmount server with AMD processors with internal RAID
5 capability. Which HP ProLiant system would you recommend?
A. ML570
B. DL580
C. BL35p
D. DL385
Answer: D
QUESTION NO: 120
Which pre-project document is crucial for ensuring a mutual understanding between you
and your customer?
A. Scope of Work
B. Bill of Materials
C. Statement of Work
D. Build Instructions
Answer: A
QUESTION NO: 121
Where can you get the most updated BIOS firmware for a ProLiant Server?
A. Firmware CD included with ProLiant Server
B. HP PartSurfer on HP website
C. SmartStart CD included with ProLiant Server
In a single server environment, which tool is best for setting thresholds on disk or
processor utilization?
A. HP Workload Management Pack
B. HP Performance Management Pack
C. HP System Management Homepage
D. HP Systems Insight Manager
Answer: C
QUESTION NO: 130
Which controller supports serial-attached SCSI (SAS) disk drives in the HP ProLiant
DL385 G1 server?
A. SmartArray 6i
B. HP 6-ports SATA/SAS controller
C. SmartArray 6404
D. SmartArray P600
Answer: D
QUESTION NO: 131
You installed 2GB of memory into a ProLiant server but during POST only 1GB is
detected. What should you do to resolve this problem?
A. Check if the Intel Xeon processor with HT support is installed.
B. Check if Advanced Memory Protection is enabled in RBSU.
C. Check if dual bank memory configuration is enabled in RBSU.
D. Install the latest firmware on the memory controller board.
Answer: B
QUESTION NO: 132
What is an advantage of the ProLiant ML-series servers?
A. cooling efficiency
B. rapid deployment and provisioning
C. power efficiency
D. internal expansion
Answer: D
When performing a manual update of the version control repository, which step should be
performed next to ensure the files are correctly displayed in the VCRM homepage?
A. rescan the catalog
B. rescan the index
C. rebuild the repository
D. rebuild the index
Answer: A
QUESTION NO: 145
Your customer wants to purchase a new server that is fast, reliable and expandable. The
server needs to support RAID 5 internally. Which model would you recommend?
A. ProLiant DL360 G4
B. ProLiant ML370 G4
C. ProLiant DL100 G1
D. ProLiant DL145 G2
Answer: B
QUESTION NO: 146
Which tool is provided with HP ProLiant servers for setting and monitoring performance
thresholds?
A. SmartSetup
B. Workload Management Pack
C. Systems Insight Manager
D. GlancePlus Pack
Answer: C
QUESTION NO: 147
What is the recommended method for updating the repository in Version Control
Repository Manager (VCRM)?
A. auto update from the SmartStart CD
B. auto update from the HP website
C. auto update from the Firmware Maintenance CD
D. auto update from the VCRM subscription CD
Answer: B
Answer: D
QUESTION NO: 152
You want to install the ProLiant Support Pack (PSP) on a server running Red Hat
Enterprise Linux 3.0 using the deployment utility; however, the installation does not
proceed. What could be the issue?
A. You are running the utility from a read-only media (CD-ROM).
B. The PSP was not pre-configured.
C. You have no <root> access to the system.
D. The deployment utility is only supported on Windows operating systems.
Answer: C
QUESTION NO: 153
Which combination of HP management products allows you to track up to ten snapshots
of your local server configuration? Select TWO.
A. Virtualization Management Software
B. Systems Insight Manager
C. Business Copy
D. System Management Homepage
E. Insight Diagnostics Online Edition
Answer: D,E
QUESTION NO: 154
Which situation can cause the Version Control Agent (VCA) to deny access to the
Version Control Repository Manager (VCRM)?
A. The VCA is not identical to the version of the VCRM.
B. The trust relationship (security access) between the two system is not secured.
C. The VCA is pointing to a different IP gateway address.
D. The trust relationship (security access) between the two systems is not configured
correctly.
Answer: D
QUESTION NO: 155
Which utility validates the hardware of an unstable ProLiant DL380?
Answer: D