Professional Documents
Culture Documents
Readme KLC Ae07 (E)
Readme KLC Ae07 (E)
MODULATION :
SW1 :
SW2 :
VECTOR(X) :
VECTOR(Y) :
ASSIGNABLE PEDAL :
Encoder8<>LPFCUTOFFMODEG2/EXT
Slider5<>VCO2WAVEFORM
Slider6<>VCO2SCALE
Slider7<>MASTERTUNE
Slider8<>VCO2LEVEL
- When both SYNTH1 and SYNTH2 are designated as MS-20s,
and you want the MS-20 controller to operate on only one
of the MS-20s (only SYNTH1 or only SYNTH2), set the MIDI
channel of the SYNTH you want to control to "1" using
Connection.
- When you want to control the stand-alone version using the
microKONTROL in the KORG Native mode, change the MIDI
channel of COMBINATION to "2" using Connection. Also
(The description "MIDI channel is fixed to 1 " in the manual
was wrong.), if you want to use the MS-20 Controller to
control the MS-20 at the same time, set the MIDI channel of
the SYNTH (to which the MS-20 is assigned ) to "1" using
Connection.
- When using the microKONTROL or the KONTROL49 and the
stand-alone version in the KORG Native mode, press the
[ENTER] key on the microKONTROL or the KONTROL49 and
the current parameter names will be shown on the LCDs.
- You can write (or update) a Performance program by
clicking the [Write] button, and then double-clicking a
destination program.
MDE-X
v1.2.5
- The method of the default setting of the .fxb file that is
loaded when launching the software is changed. If you
would like to make your saved .fxb file the default setting,
first, load the file which you have saved, then click "KORG"
logo on the MDE-X screen, and select "Make Current Bank