Professional Documents
Culture Documents
MANUAL
Item #142479
TM
Thank you very much for choosing an Ultra-Tow Product! For future reference, please complete
the owners record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this product not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This all-steel 60in.L x 20in.W cargo carrier attaches to any 2in. receiver hitch to transport secured
cargo behind a vehicle. Use only in a 2in. Class III or IV receiver with a minimum 500-lb. capacity.
Description
Product Size
Load Capacity
Hitch Size
CAUTION: Do not allow persons to use or assemble this cargo carrier until they have
read this manual and have developed a thorough understanding of how the cargo carrier
works.
Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents.
Keep children and bystanders away while assembling, installing or removing the cargo carrier.
Distractions can cause lose of control, so visitors should remain at a safe distance from the work
area.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when using the cargo
carrier. Secure all cargo with tie-down straps and /or bungee cords(not included).
Never exceed recommended load capacity of 500 lbs.
ASSEMBLY
Recommended Tools:
1 ea. 17mm combination wrench
1 ea. 19mm combination wrench
TIP: Refer to parts diagram during assembly to see fully assembled product.
OPERATION
MAINTENANCE
Maintain your cargo carrier. It is recommended that the general condition of the cargo
carrier be examined before each use. Keep your carrier in good condition by adopting a
program of conscientious repair and maintenance in accordance with the recommended
procedures found in this manual.
Keep the carrier clean. A Properly maintained cargo carrier will work more effectively. Keep
all of the parts dry, clean ,and free from oil and grease
Cleaning. Use only soap and a damp cloth to clean your cargo carrier.
Part#
Description
Qty.
Part#
Description
Qty.
Cotter Pin
Connector Plate
Hitch Pin
Fence Basket
Bolt M10X70
Plastic Cover
Bolt M10X16
WARRANTY
One-Year Limited Warranty
Distributed by
Northern Tool + Equipment Co., Inc.
Burnsville, MN 55337-0499
Made in China