Professional Documents
Culture Documents
IINT 2703A+
AdvancedLeadFree
RepairingSystem
INSTRUCTION MANUAL
ThankyouforpurchasingAoyueInt2703A+RepairingSystem.
Itisimportanttoreadthemanualbeforeusingtheequipment.
Pleasekeepmanualinaccessibleplaceforfuturereference.
Manufacturer:
AOYUETONGYIELECTRONICEQUIPMENTFACTORY
JishuiIndustrialZone,Nantou,ZhongshanCity,
GuangdongProvince,P.R.China
http://www.aoyue.com
TABLEOFCONTENTS
ProductDescription 3
Specifications4
PackageInclusion
FunctionsandFeatures
SafetyPrecautions
AssemblyandPreparation
ControlPanelGuide
OperatingGuidelines1017
AutoSleepFunctions1820
DigitalCalibration2123
CareandMaintenance2426
BasicTroubleshootingGuide
2729
ReplacementTips
30
AirNozzles31
31
REPLACEMENT TIPS
PRODUCT DESCRIPTION
The Aoyue INT2703A+ Advanced LeadFree Repairing System is a
reworking equipment that combines the functionality of Hot Air Gun,
SolderingIron,SmokeAbsorber,andDesolderingGuninonepackage.
ThedualportsystemoftheInt2703A+allowssimultaneoususeof
thedesolderinggunandsolderingiron.
The nozzle is specially designed with air spreader technology to
disperseheatandairevenlygreatlyenhancingtheheatoutputformore
effective reflows. When paired with our fourth generation BGA nozzle
technology, reworking larger BGAs (CPUs GPUs) will be even more
efficientandrepeatable.
It has several safety features such as the autocooling process of
the Hot Air Gun. This functionality protects the device (and its
components) from excessive heat upon reaching any of the following
conditions: (1) when the soldering gun remained idle on its resting
handle after a certain period and (2) when the temperature of the
deviceisaboveasafethresholduponturningoff.
It has several advanced features such as solder iron and
desolderinggundigitalcalibration,configurableautosleepforthehotair
gun,solderingironanddesolderinggun.
Thereisanautomatedfunctionthatallowtheprogrammingofa5
segmentreworkingprofileforautomatedandconsistentreflows.
Finally,theunique,innovativedesignwithdigitalcontrolpaneland
display provides precision, safety, and ease of use to match all
reworkingrequirements.
30
SPECIFICATION
MAINSTATION
PowerInput:
StationDimensions:
availablein110V/220V
188(w)x126(h)x250(d)mm
Weight:
5.6Kg
SOLDERINGIRON
PowerConsumption:
70W
TemperatureRange:
200C480C
HeatingElement:
CeramicHeater
OutputVoltage:
24V
HOTAIRGUN
PowerConsumption:
500W
TemperatureRange:
100C480C
HeatingElement
Pump/MotorType:
AirCapacity:
MetalHeatingCore
DiaphragmPump
23l/min(max)
DESOLDERINGGUN
TemperatureRange:
200C480C
HeatingElement:
CeramicHeater
OutputVoltage:
Case4: TheWiremeshcapisconnectedbutairflowlevelisstilllow.
SOLUTION:
Check the filter pad inside for dirt that can block the air passage. Clean or
replaceifnecessary.
ADDITIONALSOLUTION: Checkforanytanglesinthetubeofthehotair
gunthatcancausetheairblockage.
PROBLEM8:UNITSHOWSUNCONVENTIONALBEHAVIOR
Description:Unitoperateserratically.
SOLUTION1:TrytoswitchOFFthedeviceandswitchONagain.Unplugthe
systemfromthemainpowersourceandpluginagainwhennecessary
SOLUTION2: Restore unit to default factory setting. switch off/on the unit
while holding the hotair temperature down button until the banner finishes
scrolling,theunitwouldreverttoitsdefaultfactorysetting.
OTHERPROBLEMSNOTMENTIONED:
Contactthevendor.
24V
Specificationsaresubjecttochangewithoutpriornotice.
29
PACCKAGE INCLUSIONS
PROBLEM6:SOLDERINGIRONTEMPERATUREDISPLAYPANEL
SHOWSPLUGCHARACTERS
Case1: The system shows PLUG from the soldering iron temperature
displaypanel.
939VacuumSuctionPen
2703A+Main
03
27
A+
G001ICPopper
HotAirGunand
HotAirGunHolder
30150J
HeatResistantPad
SolderingIronwith
SmokeAbsorber
20125Filter
Spring
DesolderingGun
andHolder
201242Nozzle
cleaningpin
Desolderingtips
3017JFilter
Pads6pcs.
FilterVacuumCap
2630BSolderingIronHolder
withSolderWireStand
PowerCord
28
LF2BTipwith
HeaterCartridge
SuctionVacuumCap
AirNozzles
(1124,1130,1197,1313,1919,1010)
MicroprocessorcontrolledESDsafeequipment.
3in1repairingsystemcombiningHotAirGun,SolderingIron,and
DesolderingGuninonesophisticatedpackage.
Advancetechnologyairspreadernozzle
touchtypepanelcontrolsforprecisionandeaseofuse.
The desoldering gun is equipped with air cylinder type vacuum
efficientlyabsorbandfilterharmfulfumes.
Automatedreflowfunctionwith5segmentprogrammableprofile.
heatingelementandsensorinjustonecomponent.Replacingtips
isaseasyasslippingitin/outofthecompatible24Vsolderingiron.
User configurable 1 to 60 minute idletoautosleep mode for
additionaldeviceprotectionandpowersaving.
Builtin autocooling process that protects the system and its
componentsfromexcessiveheat,prolongingusagelife.
Largeselectionofairnozzles.
Compatibilitywithdifferentkindofsolderingtips.
27
SAFETY PRECAUTIONS
Changingnozzle:
Unlockthefilterdockbytogglingthefilterdocklockingmechanism.Thefilter
dock would push out to allow easy extraction of the filter barrel assembly
whichhousesthefilterpad,filterspringandfilterbarrelcap.
FilterBarrelAssembly
FilterDock
FilterDock
CAUTION:Improperusagecancauseseriousinjurytopersonnel
and/ordamagetoequipment.Foryourownsafety,pleaseobserve
theff.precautions.
everythingisingoodcondition.Ifthereareanysuspecteddamage,
donotusetheitemandreporttheissuetoyourvendor.
Turn OFF the main power switch and unplug the device when
movingthedevicefromonelocationtoanother.
Do not strike or subject the main unit to physical shock. Use
carefullytoavoidinjuryanddamagetoanypart.
Handlewithcare.
Neverdroporsharplyjolttheunit.
Filterdocklocking
mechanism
Containsdelicatepartsthatmaybreakiftheunitisdropped.
Make sure the equipment is always grounded. Always connect
powertoagroundedreceptacle.
Temperaturemayreachashighas480CwhenswitchedON.
Do not use the device near flammable gases, paper and other
flammablematerials.
Donottouchheatedparts,whichcancausesevereburns.
Donottouchmetallicpartsnearthetip.
Disconnect the plug from the power source if the unit will not be
usedforalongperiod.
Turnoffpowerduringbreaks,ifpossible.
Useonlygenuinereplacementparts.
Turnoffpowerandlettheunitcoolbeforereplacingparts.
Theunitmayproduceasmallamountofsmokeandunusualodor
during initial usage. This is normal and should not yield any
negativeresultwhenreworking.
Solderingprocessproducessmokeuseonwellventilatedplace.
26
B.SolderingIron
1. InstallthesolderwiretothesolderingironholderasinFigure1.
Inside the pipe, the quartz glass and heat insulation are installed.
5.
Loosenthecableandtakeouttheheatingelement.
Insertnewheatingelementandreconnecttheterminal.Becarefulnot
torubHeatingElementwire.
6.
Reconnectthegroundwireafterreplacingtheelement.
7.
Assemblethehandleagain.
SolderingIronErrorMessages
1. Soldering Iron connection assembly is not connected or not
properlyconnectedtothereceptacleonthecontrolpanel.
2. Soldering iron tip is damaged and needs to be replaced. The
devicewilldisplayPLUG.
3. Indicating a problem with the contacts of the soldering iron or
thetip.
Figure1.Solderingironstandwithsolderwireholder
DeSolderingGun
1. Beforeusagedampenthefilterpadswithalittlebitofwatertoallowefficient
air passage and filter action, redampen pads frequently for maximum
efficiency.
2. Routinely clean Spring Filter, and replace filter pads when they are dirty or
clogged.
3. ThesolderpathwaycanbecleanedusingtheprovidedNozzlecleaningpin,use
thecleaningpinwhenpathwayseemsclogged.
DeSolderingGunDisassembledillustration:
FilterBarrel
FilterPads
SpringFilter
Filterbarrel
cap
FilterDock
Securinglock
Heaterexternal
housing
DesolderingGunBody
Nozzle
Heating
element
25
Description
Hotairgunheatingelement
Plastichandleofhotairgun
Hotairguncompletehandle
Hotairgunmetalpipe
SolderingIroncompletehandle
Desolderinggunheatingelement
Plastichandleofdesolderinggun
Desolderingguncompletehandle
aoyue
REPAIRINGSYSTEM
Int2703A+
18
2
3
16
13
11 12
SolderingIronTip
Always keep the solderplated section of the tip/nozzle coated with a small
amount of solder. Oxide coating on the tip of the nozzle reduces its heat
1AirflowGauge
2HotAirGunTemperatureAdjustmentButtons
3HotAirGunAirflowAdjustmentButtons
4SolderingIronTemperatureControlButtons
conductivity. Coating the tip with a small amount of fresh solder ensures
maximumheatconductivityisobtained.
5DesolderingGunTemperatureControlButtons
6HotAirGunOutputTerminal
7SmokeAbsorberTerminalorVacuumCap
ReplacingtheSolderingIrontip
1. AlwaysturnOFFmainpowerswitchwhenremovingorinsertingatip.
2. Ifthetipishot,usetheheatresistantpadtopullitout.
3. Insertthenewtipfullyintothehandle.Ifthetipisnotfullyinserted(orif
8SolderingIronReceptacle
9 DesolderingGunReceptacle
10MainPowerSwitch
11DesolderingGunTemperatureDisplay
12DesolderingGunFunctionActivationSwitch
ReplacingtheheatingelementoftheHotAirGun
The heating element is found in the middle part of the hot air gun. The
13SolderingIronTemperatureDisplay
14SolderingIronFunctionSwitch
15SmokeAbsorberFunctionSwitch
16HotAirGunAirflowDisplay/AutomateDisplay
normallifeofaheatingelementis1yearundernormaloperatingconditions.
17HotAirGunAutomateFunctionSelector
Steps:
1. Loosenthe3screwsthatsecurethehandle.
14
LEGEND:
withthecontactsofthesolderingironorthetip.
17
15
Blower/VacuumAirTerminalFilters
Filtersshouldbecleanedandreplacedregularlytoavoiddirtwhichcanclogthe
air passage. More importantly, this will also effectively clean the toxic fumes
producedduringsolderingprocess.
19
10
18HotAirGunTemperatureDisplay/AutomateDisplay
19HotAirGunFunctionSwitch
2. Slideofftheplastictube.
3. Disconnectthegroundwiresleeve.
24
OPERATING GUIDELINES
IMPORTANTREMINDERS:
1. Make sure the equipment is placed on a flat stable surface
and all the heatgenerating components placed on their
respectiveholdersorstands.
2. EnsureallfunctionswitchesareOFFpriortoreworking.
3. Ensureallterminalconnectionsareproperlysecured.
IMPORTANT: Please refer to the CONTROL PANEL GUIDE
page for buttons and display panel directory.
A.INITIALPROCEDURES
1. Plug the device to the main power source using the power cord
providedinthepackage.
2. With all function switches deactivated and all terminal connections
properlysecured,switchONthedevicebyactivatingthemainpower
switch(10fromthecontrolpanel).
3. The display panels, will temporarily show the product name AOYUE
Int2702andthendisplayOFF.Thesystemwillremainatthisstate
untiltheuseractivatesafunction.
B.HOTAIRGUN
1. Followtheinitialproceduresabove,A.INITIALPROCEDURES.
2. ActivateHotAirGunswitch(19fromthecontrolpanel).
3. Thesystemwillimmediatelystarttoblowairatanairflowrateof50
while rapidly and safely increasing the air temperature to 100C
(defaultsystemoperatingparameters).Thesevalueswillbereflected
from the Hot Air Gun Air Temperature and Air Pressure display
panels,18and16fromthecontrolpanel,respectively.Themetal
ball inside the air gauge (1 from the control panel) will also settle
somewhereinthemiddleofthevisibleareaindicatingthatthesystem
isblowingairatanaverageornormalrate.
DIGITAL CALIBRATION
SolderIronDigitalTemperatureCalibrationExample
Theexternaltemperaturesensordisplays250degrees.
solderingironis300degrees.
300 250 = 50. An additional adjustment of 50 degrees is
required.Uponenteringcalibrationmode,thedisplayshows010,
indicatingacalibrationnumberof10isalreadypresent.
Therefore10+50=60.
Theexternaltemperaturesensorwouldnowdisplay298to302.
DesolderingGunDigitalTemperatureCalibrationExample
Theexternaltemperaturesensordisplays300degrees.
solderingironis350degrees.
300 350 = 50. An additional adjustment of 50 degrees is
required.Uponenteringcalibrationmode,thedisplayshows010,
indicatingacalibrationnumberof10isalreadypresent.
Therefore1050=50.
Weadjustfrom010to050bypressingthedownbuttonofthe
Desoldering Gun Temperature Adjustment button (5 from the
controlpanel)
Saveandexitcalibrationmode.
Theexternaltemperaturesensorwouldnowdisplay298to302.
NOTES:
Calibration will only make the newly calibrated point the most
accurate.Othertemperaturepointsmaybealittleoff.
10
23
DIGITAL CALIBRATION
OPERATING GUIDELINES
I.UtilizingtheDesolderingGunDigitalTemperatureCalibration
1. TurnontheDesolderinggunfunctionswitch.
2. Set to appropriate temperature you want to calibrate. Place the
tipofthedesolderinggunonanexternaltemperaturemeter.
3. Thereadingsontheexternaltemperaturesensorshouldbemore
orlessequaltothedisplayedtemperature.
4. Iftherearelargediscrepancyinthetemperaturereadingwecan
recalibrate the temperature setting. First write down the set
temperature of the soldering iron and the actual temperature
readingfromtheexternaltemperaturemeter.
Forexample:
Settemperature=300
externaltemperature=350
5. TurnofftheSolderingIronFunctionswitch(14fromthecontrol
panel).EnsurethattheDesolderingGunFunctionswitchisinthe
offposition(12fromthecontrolpanel).
6. PressandholdtheUP buttonoftheSolderingIronTemperature
Adjustmentbutton(4fromthecontrolpanel).
7. TheDesolderingGunTemperatureDisplay (14fromthecontrol
panel).Willswitchtofourzeros000indicatingitisnowinthe
desoldering gun temperature calibration mode. Release the UP
4. Adjust the air flow level using the AIR PRESSURE ADJUSTMENT
BUTTONS(3fromthecontrolpanel).
5. Adjust the hot air gun air temperature using the HOT AIR GUN
TEMPERATURE ADJUSTMENT BUTTONS (2 from the control
panel). The prefix of the display for Hot Air Gun Temperature will
change from C to c indicating that air temperature is being
adjusted. It will return to C indicating actual temperature is
displayed.
6. Reworking task can be started 1 minute after the desired hot air
buttonoftheSolderingIronTemperatureAdjustmentbutton(4
fromthecontrolpanel).
temperatureisgraduallydecreasing.Oncethetemperaturedropsto
approximately 90C thesystemwillhaltanddisplayOFFonthe
values.Inourexamplethesettemperatureis300buttheactual
temperature is 350, There is a difference of 50 degrees. Press
theupbuttonuntilwereach050.
9. Confirm the change by pressing and holding the UP button of
IMPORTANT: Whenadjustingtheairtemperature,itisstrongly
advisedtoinitially increase the airflow level in order to manage
the system temperature. This is to protect the heating element
insidethehandlefromexcessiveheatandavoidthepossibilityof
subjectingadjacentcomponentstothermalshock.
panel.Itisnowsafetoswitchoffthemainpowerswitch.
9. TurnOFFthemainpowerswitch.
10. Unplugthedevicefromthemainpowersource.
the SolderingIronTemperatureAdjustmentbutton(4fromthe
controlpanel).
22
11
OPERATING GUIDELINES
C.AUTOMATEFUNCTION
The system is equipped with a 5 stage automated hot air rework
profiling system. To access and change the time and temperature
settingsoftheprofilefollowtheguidebelow:
DIGITAL CALIBRATION
1. Ensurethatthehotairgunfunctionswitchisdeactivated.
2. TheHotAirGunAutomateFunctionSelector(17fromthecontrol
panel) allows us to scroll thru the different stages of the profile.
ThestagesusethesymbolsA,b,c,dandE,toindicatestages1to
5respectively.TheAutomateDisplay(18formthecontrolpanel)
shows the desired temperature for each stage and the Automate
Display (16 form the control panel) shows the duration at which
thesettemperatureistobemaintained.
3. NowpresstheHotAirGunAutomateFunctionSelector,thedisplay
willchangeto###A,and###t.ThesuffixAindicatesthatwe
are now adjusting the desired temperature for stage 1. The suffix
tindicatesthetimeinsecondsthedesiredtemperatureistobe
maintained.
4. UsetheHotAirGunTemperatureAdjustmentButtonstoselectthe
desired temperature for this stage. Use the Hot Air Gun Airflow
H.UtilizingtheSolderIronDigitalTemperatureCalibration
By default, the system is properly calibrated but for some cases
when a little adjustment of the soldering iron temperature is required
thefollowingprocedurecanbedone.
1. Turnonthesolderingironfunctionswitch.
2. Settoappropriatetemperatureyouwanttocalibrate.Placethetip
ofthesolderingirononanexternaltemperaturemeter.
3. Thereadingsontheexternaltemperaturesensorshouldbemore
orlessequaltothedisplayedtemperature.
4. Iftherearelargediscrepancyinthetemperaturereadingwecan
recalibrate the temperature setting. First write down the set
temperature of the soldering iron and the actual temperature
readingfromtheexternaltemperaturemeter.Forexample:
settemperature=350
externaltemperature=300
5. TurnofftheSolderingIronFunctionswitch(14fromthecontrol
panel).EnsurethattheDesolderingGunFunctionswitchisinthe
offposition(12fromthecontrolpanel).
6. Press and hold the UP button of the Desoldering Gun
TemperatureAdjustmentbutton(5fromthecontrolpanel).
7. The Soldering Iron Temperature Display (11 from the control
panel).Willswitchtofourzeros000indicatingitisnowinthe
soldering iron calibration mode. Release the UP button of the
DesolderingGunTemperatureAdjustmentbutton
8. UsetheSolderingIronTemperatureAdjustmentbuttons(4from
thecontrolpanel)toincreaseordecreasethecalibrationvalues.
In our example the set temperature is 350 but the actual
temperatureis300,Thereisadifferenceof50degrees.Pressthe
upbuttonuntilwereach050.
9. Confirm the change by pressing and holding the UP button of
the Desoldering Gun Temperature Adjustment button (5 from
thecontrolpanel).
12
21
OPERATING GUIDELINES
ChangingSLEEPTimer(DesolderingGun)
By default, the systems sleep duration is 0 indicating the sleep
timerisdisabled.Toactivatethesleepfunctionfollowtheprocedures.
1. Turn off the Soldering Iron Function switch (14 from the
control panel) .Ensure that the Desoldering Gun Function
switchisintheoffposition(12fromthecontrolpanel).
2. Press and hold the DOWN button of the Soldering Iron
TemperatureAdjustmentbutton(4fromthecontrolpanel).
3. The Desoldering Gun Temperature Display (14 from the
controlpanel).Willswitchto000tindicatingitisnowinthe
desoldering gun sleep timer adjustment mode. Release the
DOWN button of the Soldering IronTemperature Adjustment
button
4. UsetheDesolderingGunTemperatureAdjustmentbuttons(5
from the control panel) to increase or decrease the sleep
duration.Timerisadjustablefrom1to60minutes,avalueof0
indicatesthatthesleeptimerfunctionisturnedoff.
5. ConfirmthechangebypressingandholdingtheUPbuttonof
the Soldering Iron Temperature Adjustment button (4 from
thecontrolpanel).
20
Uponthestartoftheautomatedreworkingfunctionthehotairgun
wouldslowlyheatupuntilitreachesthesettemperatureofsegmentA.
After the set temperature is reached it would maintain the set
temperature for the duration as set in segment A. The displayed
durationwillstartcountingdownuntilthetimerreaches0afterwhichit
willproceedtothenextsegment,repeatingtheprocessuntilitfinishes
all 5 segments. Upon the end of the fifth segment the cool down
functionwillbeactivatedtoautomaticallycooldownthesystembefore
shuttingoff.
NOTES:
1. HotAirGunTemperatureisadjustablebetween100and480C.
2. HotAirGunAirflowRateisadjustablebetween15and100.
3. Thehotairgunisequippedwithatemperaturelimitingfeaturetoonly
allowatemperatureriseof3degreespersecond.Thisisinaccordance
with the industry standard allowable temperature rise time to prevent
damagetosensitivecomponents.
13
OPERATING GUIDELINES
D.SOLDERINGIRON
1. Connect the Soldering Iron connection assembly to the 6pin
receptacle located at the front of the control panel (9 from the
CONTROLPANELGUIDE).
2. Followtheinitialprocedures(A.INITIALPROCEDURES).
3. Connect the vacuum tube to the Smoke Absorber Terminal or
Vacuum Cap (7 from the control panel). If smoke absorber
functionistobeused.
4. Activate the SOLDER IRON Activation switch (14 from control
panel). This will automatically start to increase the temperature of
thesolderingironto350C(default).
5. AdjustthesolderingirontemperatureusingtheSOLDER/DESOLDER
TEMPERATUREADJUSTMENTbuttons(4fromthecontrolpanel).
6. If smoke absorber function is to be used. Activate the SMOKE
ABSORBERActivationswitch(15fromthecontrolpanel).
7. Start using the soldering iron as soon as desired temperature is
reached.
8. Whenthetaskisfinished,deactivatetheSMOKEABSORBERswitch.
9. DeactivatetheSOLDERIRONactivationswitch.
10. Allow sufficient time for the soldering iron to cool down before
keepinginasafestorage.
D.DESOLDERINGGUN
1. Connect the Desoldering gun connection assembly to the 6pin
receptacle located at the front of the control panel (8 from the
CONTROLPANELGUIDE).
2. Followtheinitialprocedures(A.INITIALPROCEDURES).
3. Connect the vacuum tube to the Smoke Absorber Terminal or
VacuumCap(7fromthecontrolpanel).
14
Thesleepmodetimerisconfigurablebetween1and60minutes.
Asleepmodetimervalueof0disablesthesleepfunction.
SleepmodesettingsforHotAirgunissavedintothememoryand
shallremainineffectuntilitisresetornewdataisentered.
G.AutoSleepMode(SolderingIronandDesolderingGun)
The device has a builtin autosleep feature to conserve power
enhance the heater life. The sleep timer can be configured to power
downthesolderingironordesolderinggunafteradefinedtime.When
insleepmodefourdashes willbeshownindicatingthatitis
nowinsleepmode.Toreactivatethesolderingironordesolderinggun
simply push the its function button or its temperature adjustment
button.
ChangingSLEEPTimer(SolderingIron)
By default, the systems sleep duration is 0 indicating the sleep
timerisdisabled.Toactivatethesleepfunctionfollowtheprocedures.
1. TurnofftheSolderingIronFunctionswitch(14fromthecontrol
panel).EnsurethattheDesolderingGunFunctionswitchisinthe
offposition(12fromthecontrolpanel).
2. Press and hold the DOWN button of the Desoldering Gun
TemperatureAdjustmentbutton(5fromthecontrolpanel).
3. The Soldering Iron Temperature Display (14 from the control
panel).Willswitchto000tindicatingitisnowinthesoldering
ironsleeptimeradjustmentmode.ReleasetheDOWN buttonof
theDesolderingGunTemperatureAdjustmentbutton
4. UsetheSolderingIronTemperatureAdjustmentbuttons(4from
the control panel) to increase or decrease the sleep duration.
Timer is adjustable from 1 to 60 minutes, a value of 0 indicates
thatthesleeptimerfunctionisturnedoff.
5. ConfirmthechangebypressingandholdingtheDOWNbutton
ofthe DesolderingGunTemperatureAdjustmentbutton(5from
thecontrolpanel).
19
OPERATING GUIDELINES
F.AutoSleepMode(HotAirGun)
The device has a builtin autosleep mode feature such that if the
HotAirGunsitsonitshandleandremainedidleafteracertainperiodthe
prefixofthedisplayforHotAirGunairtemperaturewillalsochangefrom
C to d) , the device will switch to sleep mode. This mechanism is
triggeredbyacountdowntimer.Whenthetimerhaselapsed,thesystem
will blow air (at room temperature) at maximum rate in order to bring
downthetemperature.Duringthistime,theHotAirGunairleveldisplay
willchangetocool.Oncethetemperaturedropstoapproximately90
C,theHotAirGunwillautomaticallystopandshowfourdashes
indicatingthatthesystemisnowinsleepmode.Toreactivatethehotair
gunsimplypresspickupthehotairgunfromitsdock.
4. ActivatetheDESOLDERGUNActivationswitch(12fromcontrol
panel). This will automatically start to increase the temperature of
thedesolderinggunto350C(default).
5. Adjust the desoldering gun temp. using the DESOLDER
TEMPERATUREADJUSTMENTbuttons(5fromthecontrolpanel).
6. Allow the desoldering gun's tip and its barrel to heat up. Tip
temperaturecanbereachedwithin56minutesanditsbarrelwould
obtainoptimumtemperature59minutesafterthetiptemperature
hasbeenreached.Ifuponinitialusesoldergetsstuckattheendof
the barrel, clean the barrel and wait a few more minutes for the
barreltoheatup.
7. Check the tip temperature with an external temperature sensor,
adjust temperature settings higher or lower for the right
temperature.Orrecalibrateatthedesiredtemperaturelevel
8. Ensure that all the solder is melted before triggering the pump.
(Partiallymeltedsolderwillstillbesuckeduphoweveritwouldclog
thebarrel).
9. Upon pressing the pump trigger hold the trigger for 1 to 2
secondslonger,aslargerlumpsofsoldermayneedalongersuction
timetoclearthebarrelandgointothefilter.
10. Cleanthefilteranddampenthespongefrequentlyduringandafter
usagetoallowbettersuctionpower.
11. When the taskis finished, deactivate the DESOLDERGUN function
switch.Allowthedesolderingguntocooldownbeforehandlingfor
storage.
Notes:
Pleasefollowtheproceduresandtipspresentedaboveformore
efficientusageofthedesolderinggun.
ChangingSLEEPModeTimer(HOTAIRGUN)
Bydefault,thesystemhas15minutecountdowntimebeforethehot
air gun goes to sleep mode. This can be altered by the following
procedure.
1. While the hot air gun is on standby mode (0FFisdisplayedon
the panels 18 and 16), Press and hold the UP button of the
HOTAIRGUNAIRFLOWadjustmentbutton(3controlpanel).
2. Wait until 015d is displayed on the Hot Air Gun Temperature
displaypanel,18.
3. Releasethebuttonwhen005dappears.
4. Adjustthetimeusingthe UP and DOWN buttonsoftheHOTAIR
GUNTEMPERATUREadjustmentbuttons(2controlpanel).
5. Confirm the change by pressing and holding the DOWN button of
the HOT AIR GUN AIRFLOW adjustment button. (3 from control
panelguide)
6. ThesystemwillswitchbacktodisplayingOFFindicatingthenew
sleeptimerissavedintothesystem.
18
15
OPERATING GUIDELINES
Thesolderingironanddesolderinggunoperatingtemperatureis
configurablebetween200Cand480C
Becauseofthedifferenceintheheatingelementandsizeofthe
solderingirontipanddesolderinggun,thesolderingironwillheat
upfasterthanthedesolderinggun.Thisisnormalanddoesnot
haveanyimpactonthesystemsperformance.
Therewillbeaslightdropintemperaturedisplayoncethetrigger
ofthedesolderinggunisused.Thisisduetorapidintakeofairin
whichtemperatureissignificantlycoolerthanthedesolderinggun
tip.Whenthesystemdetectsthis,itwillautomaticallyadjustthe
temperaturetocompensateforthetemperaturedifference.
NOTICE: When using the desoldering gun and
soldering iron simultaneously, the smoke absorbing
functionofthesolderingironwillbedeactivated.This
ittogiveprioritytothedesolderinggun.
OPERATING GUIDELINES
E.HotAirGunSafetyFeature
Thesystemshotairgunhasasafetyfeaturetolimitthetemperature
rise to no more than 3 degrees per second. The 3 degrees per second
limit is an industry standard recommendation to minimize component
damageduetoarapidincreaseoftemperature.Thisprotectionfeatureis
activated by default and can be deactivated if desired. Below are the
proceduresonactivation/deactivationofthissafetyfeature:
1. Turn OFF system and ensure all function switches are in OFF
position.
2. Press and hold this two buttons. The Hot Air Gun Automate
FunctionSelector(17fromthecontrolpanel)andtheUPbutton
of the DESOLDER GUN TEMPERATURE adjustment button.(5
fromthecontrolpanel).
3. With the two buttons held in the pressed position turn
ONthesystembyswitchingtheMainPowerSwitch(10).
4. Release the buttons when SAFE OFF appears on the Hot Air
Gun Temperature Display/Hot Air Gun Airflow Display . Release
thebuttonswhenthisisdisplayed.
5. The display below the word SAFE will indicate whether the
safety feature in On or OFF by displaying the corresponding
wordontheHotAirGunAirflowDisplay Thesystemwillproceed
tostandbymode.
6. ToswitchthesafetyfeatureOnorOFFsimplyrepeatsteps1to
5.
7.
16
17