Professional Documents
Culture Documents
Classpad Add-In Installer: User'S Guide
Classpad Add-In Installer: User'S Guide
ClassPad
Add-In Installer
Users Guide
RJA510188-4
http://world.casio.com/edu_e/
Important!
Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to
malfunction.
Note
Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States
and other countries.
AMD Duron is a registered trademark or trademark of Advanced Micro Devices, Inc. in the United States and/or other
countries.
Company and product names used herein are trademarks of their respective owners.
20031201
E-1
Contents
1. Installing the ClassPad Add-In Installer ......................................................... E-3
To install the ClassPad Add-In Installer .............................................................. E-3
2. Using the ClassPad Add-In Installer ............................................................... E-5
To use the ClassPad Add-In Installer ................................................................. E-5
To uninstall an add-in application ..................................................................... E-10
3. Checking for Correct Add-In Installation ...................................................... E-11
4. Installing Language Pack Add-In Software .................................................. E-12
To install the Language Pack add-in software .................................................. E-12
E-2
20031201
20031201
E-3
6. Click [Install].
7. Click [Finish].
E-4
20031201
Note
Specify USB cable for the ClassPads Cable Type setting. For details, see Communication Dialog Box on page
13-3-8 of your ClassPad Users Guide.
Tapping the [Cancel] button on the ClassPad screen during ClassPad Add-In Installer operation cancels operation on
both the ClassPad and the computer. Conversely, clicking the [Cancel] button on your computer screen also cancels
operation on your ClassPad. After you execute a cancel operation, it will take a few seconds for it to take effect. This
is normal, and does not indicate malfunction.
20031201
20040201
E-5
Since your ClassPad is not connected to the computer yet, the message ClassPad - Not connected
will appear in the left pane.
4. Use the USB cable that comes with your ClassPad to connect it to the computer.
5. If the Found New Hardware Wizard appears on
your computer screen, perform the steps below to
install the ClassPad USB driver.
The Found New Hardware Wizard will not appear
if you already have the ClassPad USB driver
installed on your computer. In this case, advance
to step 6.
E-6
20031201
20040201
c. Click [Finish].
7. Tap [OK].
8. Tap [Link], [Install], and then [Add-In].
20031201
20040201
E-7
9. Tap [OK].
10. On the ClassPad Add-In Installer window, click
12. Drop the add-in software you want to use onto the right pane.
This starts installation of the add-in.
You can also use the following steps to install a single add-in
application.
(1) On the ClassPad Add-In Installer window, click [Add-In] and
then [Application].
(2) On the file selection window that appears, click the file you
want to install.
(3) Click [Open] and then go to step 14.
icon.
E-8
20031201
20031201
E-9
1. Perform steps 1 through 11 of the procedure under To use the ClassPad Add-In Installer on page E-5.
2. On the list of add-in applications in the right
pane, click the one you want to uninstall.
3. Click the
icon.
4. Click [Yes].
Clicking [No] cancels the delete operation.
5. Perform steps 13 through 17 of the procedure under To use the ClassPad Add-In Installer on pages
E-8 to E-9.
E-10
20031201
2. Select Additional and confirm that the icon of the newly installed add-in
appears on the display.
You could also select All to check the installed add-in software.
The screen shot shown below shows the icon after the E-Con EA-200
Add-In was installed.
20031201
E-11
Note
Specify USB cable for the ClassPads Cable Type setting. For details, see Communication Dialog Box on page
13-3-8 of your ClassPad Users Guide.
Tapping the [Cancel] button on the ClassPad screen during ClassPad Add-In Installer operation cancels operation on
both the ClassPad and the computer. Conversely, clicking the [Cancel] button on your computer screen also cancels
operation on your ClassPad. After you execute a cancel operation, it will take a few seconds for it to take effect. This
is normal, and does not indicate malfunction.
E-12
20031201
20040201
Since your ClassPad is not connected to the computer yet, the message ClassPad - Not connected
will appear in the left pane.
4. Use the USB cable that comes with your ClassPad to connect it to the computer.
5. If the Found New Hardware Wizard appears on
your computer screen, perform the steps below to
install the ClassPad USB driver.
The Found New Hardware Wizard will not appear
if you already have the ClassPad USB driver
installed on your computer. In this case, advance
to step 6.
20031201
20040201
E-13
c. Click [Finish].
7. Tap [OK].
8. Tap [Link], [Install], and then [Add-In].
E-14
20031201
20040201
11. Click the file you want to install, and then click [Open].
12. Click [OK].
20031201
E-15
E-16
20031201
SA0402-B