Professional Documents
Culture Documents
DT Syntax Check
EPLAN Training
DT Syntax Check
EPLAN Training
DT Syntax Check
2. In the group boxes Identifier blocks, Device tags, and Count numbers,
specify the scope of the test for the components of the DT.
3. Click [OK].
After specifying the device data in the Properties <...> dialog, EPLAN checks
whether the syntax for the specified device tag identifier is correct.
If this is not the case, EPLAN opens a message dialog in which the incorrect
elements are displayed. Via [Settings], you can go from this message dialog to the
setting for DT syntax checking. There you can check, and if necessary, correct your
syntax settings. If the "error" is a an intentional deviation from the syntax, you can
EPLAN Training
DT Syntax Check
select [Ignore] to leave the dialog and accept your entry without having to change
the settings.
EPLAN Training
DT Syntax Check
EPLAN Training