Professional Documents
Culture Documents
Brochure 38-01E
Concrete
Application
Extension rod
and stone feed
tube (material
storage)
Flexible coupling
Electrical
motor
Stone feed
tube
Eccentric
weight
Nose cone
Scope of use
With CMM Hybrid Columns the
use of piles and piled foundation
slabs is avoided increasing the soil
bearing capacity and decreasing its
compressibility.
This soil reinforcement can be used
for every construction field (housing,
commercial, industrial buildings, civil
engineering works, road and railway
embankment, harbour platforms).
The technique applies to a wide range
of soils including backfills and highly
organic soils.
Installation method
1
Penetration
Small diameter drilling
generally performed
with a displacement tool
down to design depth.
2
Rigid lower part
Use of concrete (if
necessary of mortar or
grout) through the central
hollow core of the tool
from the design depth to
the required elevation.
Foundation slab
Application
3
Overlapping zone
A bottom feed vibrator,
on which an additional
downward pressure or
activation force is applied,
is penetrated into the fresh
concrete approximately
50cm.
4
CMM Hybrid Columns under
foundation slabs
By avoiding the hard point effect of the rigid inclusion thanks the gravel top of the CMM Hybrid
Columns, the foundation slab can be designed as
usual according to the French shallow foundation
standard DTU 13.3 Dallages, with uniformly
distributed, punctual, dynamic loads and with an
improved and homogenised stiffness modulus.
w w w. Ke l l e rH o l d ing.co m
w w w. Ke l l e r G r u nd b a u .co m
0113 38-01E
www.KellerHolding.com