You are on page 1of 4

EG50F8/EG50G8 Subsea Integrity

Discussion about Fundamentals of Mechanics

Dr.-Ing. M. Amir Siddiq (amir.siddiq@abdn.ac.uk)


School of Engineering, University of Aberdeen

Image courtesy: Offshoreenergytoday.com

Pre-Course Terminology
1. Metals
2. Corrosion
3. Fracture
4. Elastic Behaviour
5. Plastic Behaviour
6. Hookes Law
7. Modulus of Elasticity
8. Yield Strength
9. Fracture Strength
10. Ductility and Brittleness
11. Stress Concentration
12. Stress-Strain Curves for Metals
13. Microstructure of a Metal
14. Loads in Subsea Environment
15. Fatigue

www.abdn.ac.uk

Questions to Refresh Memories


Elastic Modulus; Poissons Ratio, Shear Modulus
A tension test was conducted on a 1.975-in.-wide by 0.375-in.-thick
specimen of a Nylon plastic. A 4.000-in. gauge length was marked on
the specimen before load application. In the elastic portion of the
stress-strain curve at an applied load of P = 6000 lb, the elongation in
the gauge length was measure as 0.023 in., and the contraction in the
bar width was measured as 0.004 in. Determine:
a) the elastic modulus E.
b) Poissons ratio .
c) the shear modulus G.

.
.

4.000 in.

1.975 in.

www.abdn.ac.uk

Tentative Plan (Lectures/Tutorials)


Thursdays 3 6pm
Week 1: 17th Sep 2015

Introduction to Subsea Integrity

Week 2: 24th Sep

Materials Selection and Corrosion in Design 1


Dr Robert Conder (Engg. Materials Soln Ltd)

Week 3:

1st

Oct

Materials Selection and Corrosion in Design 2

Industry
Tutorial

Dr Robert Conder (Engg. Materials Soln Ltd)

Week 4: 8th Oct

Subsea Environment, Corrosion and Protection; Tutorial 1

Week 5: 15th Oct

Fracture Mechanics and Environment Assisted


Tutorial 1 Solution

Week 6: 22nd Oct

Offshore Field Development

Cracking;

Ali Anaturk (Shell)

Week 7: 29th Oct

Fundamentals of Fatigue and its Application; Tutorial 2

Week 8: 5th Nov

Subsea Integrity Management


Gavin Mann and Mark Wilson (CNR Int.)

Week 9: 12th Nov

Fatigue Life Prediction; Tutorial 2 Solution

Week 10: 19th Nov

Non-destructive Inspection; Tutorial 3

Week 11: 26th Nov

Tutorial 3 Solution; Feedback; AOB

Week 12: 3rd Dec

Revision
www.abdn.ac.uk

You might also like