Professional Documents
Culture Documents
Wellhead Systems
DMS & DW-HC MS-700
2
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700
Family
3
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 Family of Wellhead Systems
* Note: the 16-3/4” MS-700 has a total system capacity of approximately 4.7 MM lbs.
4
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 System Load Capacity
5
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Stack Up
Drawing
6
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DMS & DWHC MS 700 Wellhead Systems
7
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DMS & DWHC MS-700 Wellhead
– 7.1m lbs. load bearing capacity
– 3.0m lbs. casing capacity
– 5.25m ft-lbs. bending capacity
– 15,000 psi pressure rating
– 500k ft-lbs. anti-rotation minimum
– 4.0m lbs. housing lockdown capacity
– 750k lbs. lockdown capacity per casing
string
– VX-2/VT-2 Gasket Profile
– Conductor size 36’’
– High capacity, fatigue resistant LPH to
HPH Interface
8
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DMS & DWHC MS-700 Wellhead System
MS-1 Seal
Housing Latch Ring
9 5/8’’ Casing Hanger
Taper Socket
MS-1 Seal
Anti-Rotation Key
13 3/8’’ Casing Hanger
9
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DMS & DWHC MS-700 Wellhead System
Casing Strings
36” • Drill, Run and Cement 20’’ Casing & 18 ¾’’ Wellhead
13-5/8’’ or 13-3/8”
10 ¾’’ or 9-5/8”
10
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Differences between
DMS & DWHC
11
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
HP/LP Housing Comparison
Difference
> DMS is 6 in. longer LP and HP housings 12
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36’’ Section
13
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36’’ Wellhead Equipment
14
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DMS & DW HC-2 36” Low Pressure Housing
DW HC-2 DMS
Part No: H57720-71 Ref Part No: H57730-11 Ref
Material: 8630 Mod 95ksi Material: 8630 Mod 95ksi
Flow By Area 70.90 in2 Flow By Area 70.90 in2
Maximum O.D 38.660 in Maximum O.D 38.660 in
Minimum I.D. 31.295 in Minimum I.D. 31.295 in
Length: 39.50 Length: 45.50 in
Weight 3,506 lbs. Weight 4,145 lbs.
Working Pressure 1,000psi Working Pressure 1,000psi
Extension: 2 in or 1.5 in WT Extension: 2 in or 1.5 in WT
15
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” Low-Pressure Wellhead Housing
4’ Load-bearing Taper
3’ Load-bearing Taper
16
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Ball Valve Sub
17
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Ball Valve Assembly
18
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Slope Indicator
19
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Mud Mat Latch (No 26’’ CH Profile)
Part No: H57502-11 Ref
Operating Service Procedure: OSP 25000
Maximum OD: 38.425’’
Minimum ID: 31.320’’
Length of Sub 30.00 in
Weight 2,140 lbs.
Pressure Rating: 1,000 psi
36’’ Casing BWP: 2 .0’’ or 1.5’’ WT
20
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Mud Mat Latch (with 26’’ CH Profile)
Part No: H57435-45 Ref
Material: 8630 95ksi
Operating Service Procedure: OSP 25000
Maximum OD: 38.425’’
Minimum ID: 30.240’’
Length of Sub 34.50 in
Weight 2,140 lbs.
Pressure Rating: 1,000 psi
36’’ Casing BWP: 2 .0’’ or 1.5’’ WT
21
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Mud Mat Assembly
Part No: H222790- 25 Ref
Operating Service Procedure: OSP 25000
Mud Mat Footprint: 12 ft x 12 ft’’
Minimum ID: 37.060’’
Height: 24.50 in
Weight 8,100 lbs.
Capacity of Mud Mat: 400k lbs @ 6 ft Centers
Capacity of Mud Mat: 200k lbs equally distributed below
22
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 36” Cam Actuated Running Tool (CART)
Part No: H56314-1
Operating Service Procedure OSP 24002
Casing tension rating 500,000 lbs
Cementing pressure 1,000 psi
Top Tool Connection 6 5/8 Reg. Box
Bottom Tool Connection 4 ½’’ IF Pin
Max. Torque (Tool – Housing) 27,000 ft-lbs
Tool OD 33.06 in
Stem I.D. 3.50 in
Length 51.50 in
Weight 4,934 lbs.
Turns to function Tool 5 turns (LH make up – RH release)
Cam Sleeve Travel 2.50’’
23
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” Housing Cam-actuated Running Tool
Fill Plugs
(1 off removed for Ball Valve)
Position Indicator
Stem Bearing
24
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 36” Drill-Ahead Tool (DAT)(Old Style)
Part No: H56336-2
Operating Service Procedure OSP 24001
Casing tension rating 1,150,000 lbs
Top Tool Connection 6 5/8 Reg. Box
Bottom Tool Connection 6 5/8’’ Reg Pin
Max. Torque (Tool – Housing) 25,000 ft-lbs
Tool Stem Make Up: 3,000 ft-lbs
Tool OD 33.06 in
Stem I.D. 3.00 in
Length 83.50 in
Weight 6,547 lbs.
Turns to function Tool 2 3/4 turns (LH make up – RH release)
Cam Sleeve Travel 2.50’’
Flow through Tool (No Bull Plugs) 38.81 sq in
Max RPM in Drill Ahead Mode 100 rpm
25
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” Housing Drill-Ahead Tool
6 5/8’’ Reg Box Tool Joint
Safety Key
Anti-rotation Block
27
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” Housing Drill-Ahead Tool
6 5/8’’ Reg Box Tool Joint
Safety Key
Flow-by Area
Flow-by Area
J-out Pins
28
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” Housing Rotary Clamp
Optional
Impact Wrench 1’’ Ingersol Rand H154442-1
Model 2934P2 Pistol Grip
50’ Air Hose with Crows Foot Connection:
Parker #709220101-8-8-050
29
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” Housing Rotary Clamp
Optional
Impact Wrench 1’’ Ingersol Rand H154442-1
Model 2934P2 Pistol Grip
50’ Air Hose with Crows Foot Connection:
Parker #709220101-8-8-050
30
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” RL-4RB Connector
31
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” RL-2HCX Connector
Anti-Rotation Key
32
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” RL-2HCX & RL-4RB Clamp
33
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
36” RL-2HCX & RL-4RB Landing Shoes
Part No: R117482-5
Operating Service Procedure N/A
Maximum Casing Load 55 tons each
8 off SHCS 1.25’’ – 8unr
Make up Torque 200 ft-lbs.
1 off Eye Bolts 1/2’’- 13unc
Shoe OD on 36’’ Casing 52.50 in
Shoe Height 26.00 in
Shoe Weight 237 lbs.
Allen Socket required 7/8’’ AF
Optional
Kawasaki Air Impact Wrench 1/2’’ Drive
50’ Air Hose with Crows Foot Connection:
Parker #709220101-8-8-050
34
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
28 & 26’’ Section
35
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
28” / 26” Sub Mudline Equipment
36
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
28” Landing Sub Flow-By
Part No: H159468-1 Ref
Operating Service Procedure OSP 24013
Maximum OD: 36.88’’
Minimum ID: 31.115’’
Maximum Casing Load 750,000 lbs.
Maximum Pressure: 1,000 psi
Length: 24.00 in
Weight: 1,794 lbs
Flow By: 46.80 in2
38
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
28” Casing Hanger
O-Rings Seal
Lock Ring
28’’ CH BWP
39
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
28” Casing Hanger Load Ring Actuation
40
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
28” Casing Hanger Running Tool
41
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
26” Casing Hanger
42
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
26” Casing Hanger
Lock Ring
O-Rings Seal
26’’ CH BWP
43
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
26” Landing Sub
Part No: H57559-1 Ref
Operating Service Procedure OSP 24023
Maximum OD: 36.00’’
Minimum ID: 30.240’’
Maximum Casing Load 750,000 lbs.
Maximum Pressure: 1,000 psi
Length: 18.00’’
Weight: 1,222 lbs
45
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
26” Casing Hanger Running Tool
6 5/8’’ Reg Box Tool Joint
Non-rising Stem
18 ¾’’ CART
Retainer Plate
47
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DWHC MS-700 18 ¾ Wellhead Equipment
48
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
DMS & DW HC-2 18-3/4” High Pressure Housing
DW HC-2 DMS
Part No: H57832-11 Ref Part No: H57842-12 Ref
Maximum O.D 32.94 in Maximum O.D 32.94 in
Minimum I.D. 17.56 in Minimum I.D. 17.56 in
Length 69.00 in Length 74.75 in
Weight 7,338 lbs. Weight 8,293 lbs.
Working Pressure 15,000psi Working Pressure 15,000psi
Ring Groove VX / VT Ring Groove VX / VT
Connector Profile DW H-4 Connector Profile DW H-4
Casing Load Capacity 3.0m lbs. Casing Load Capacity 3.0m lbs.
Bending Capacity 5.25m ft-lbs. Bending Capacity 5.25m ft-lbs.
Lock-down Capacity 4.0M lbs. Lock-down Capacity 4.0M lbs.
Anti-Rotation 500,000 ft-lbs. Anti-Rotation 500,000 ft-lbs.
49
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18-3/4” High Pressure Housing
VX/ VT Gasket Profile
4’ Load-bearing Tapers
3’ Load-bearing Tapers
50
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 18-3/4” CART
51
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾’’ Wellhead Cam-actuated Running Tool
Non-rising Stem
Stem Bearing
53
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
H-4 Clamp
54
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
HC H-4 Clamp
55
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Slotted Support Plate
56
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
H4 Family
57
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
H-4 Family of Wellhead Connectors
58
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
H-4 Style ‘E’ Wellhead Connector
59
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Style ‘E’ H-4 Wellhead Connector
No: 27 Hub with BX-164 Groove
Indicator Rod
VX / VT Gasket Profile
Cam Ring
Pistons
End Caps
60
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
VX-2 Gasket
61
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
VX-2 / VT-2 Gasket
Part No: H0931-2
Operating Service Procedure OSP 18001
Maximum Working Pressure 15,000 psi
Temperature Range 35’ – 250’ F
Coating Molybdenum Disulfide
Weight 78 lbs.
62
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
VX-2 & VGX-2/VT-2 Gaskets
VX-2 Gasket provides a Metal to Metal seal between the Wellhead and
BOP.
Rating 15,000psi
Material 316 Stainless Steel with Moly 106 coating
Rating 15,000psi
Material 316 Stainless Steel with Moly 106 coating
63
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
H-4 Wellhead Connector Ring Gaskets
65
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16’’ Casing Hangers
66
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” “No-Go’’ Casing Hanger
67
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” ‘’No-Go’’ Casing Hanger
Wicker Profile for Seal Lockdown
Holes for holding Seal
Slots for Seal Shear Pins while installing CHRT
Anti-rotation Slot
Landing Shoulder
8 x Flow-by Slots (10.57 in2 flow-by)
68
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” “No-Go’’ Landing Sub
69
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” “No-Go’’ Landing Sub
20’’ BWP
Orientation Groove
Sealing Area
20’’ BWP
ID 17.135’’ 70
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” “Collet Style’’ Casing Hanger
71
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” ‘’Collet Style’’ Casing Hanger
Anti-rotation Slot Wicker Profile for Seal Lockdown
Holes for holding Seal
Slots for Seal Shear Pins
while installing CHRT
Serpentine Collet
Detaining Ring
72
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” “Collet Style’’ Landing Sub
73
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” “Collet Style Landing Sub
20’’ BWP
Orientation Groove
Sealing Area
20’’ BWP
ID 17.565’’ 74
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” Seal Assembly
Part No H57361-2
Maximum OD 17.38 in
Minimum ID 15.88 in
Length 14.88 in
Weight: 126 lbs
75
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” Seal Assembly
Shear Pins
MS Seal
O-Ring Seal
76
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” Casing Hanger Running Tool
77
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
16” Casing Hanger Running Tool
6 5/8’’ Reg Box
4 ½’’ IF Pin
78
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
13 5/8’’, 10 ¾’’ & 9 5/8’’
Casing Hanger Section
79
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Casing Hangers
80
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 13 5/8” Casing Hanger
81
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
13 5/8” Casing Hanger
Anti-rotation Slot
Running Tool Double Latch Groove
82
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 10 3/4” Casing Hanger
Part No A50601-?? Ref
Hanger OD 18.595 in
Hanger ID 9.406 in
Drifted 9,250 in
Length 21.44 in
Material 4130 80 ksi
Weight 1,019 lbs
83
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 9 5/8” Casing Hanger
Part No A50602-?? Ref
Hanger OD 18.595 in
Hanger ID 8.535 in
Drifted 8.500 in
Length 21.80 in
Material 4130 80 ksi
Weight 1,019 lbs
84
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
10 ¾’’ & 9 5/8” Casing Hanger
Anti-rotation Slot
85
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Section
86
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Casing Hanger Seal Assemblies
18 ¾” MS-1 Seal
18 ¾” SG-TPR Seal
18 ¾” MS-E Seal 87
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾” MS-1 Seal
Part No H57028-1
Maximum OD 18.540 in
Minimum ID 16.900 in
Height 9.77 in
Weight 84 lbs.
Pressure Rating 15,000 psi
18 ¾” MS-E Seal
Part No H57465-1
Maximum OD 18.540 in
Minimum ID 16.900 in
Height 9.77 in
Weight 85 lbs.
Pressure Rating 15,000 psi
18 ¾” MS SG-TPR Seal
Part No H57030-1
Maximum OD 18.592 in
Minimum ID 16.850 in
Height 9.53 in
Weight 105 lbs.
Pressure Rating 15,000 psi
88
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-1 Seal (Primary Seal Assembly)
89
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-1 Seal Assembly
Seals annulus between casing hanger and wellhead
90
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-1 Seal Assembly
Wear Bushing Anti-
rotation Slots
Energizing
Ring
Retainer Nut
91
Support Ring GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-1 Seal Assembly
Energizing
Ring
Energizing Ring is forced down
into the “U” Ring Seal
“U” Ring feature expands against
the wickers of the hanger and HP
Housing “U” Ring
Seal
Un-energized
Energized
92
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-1 Seal Assembly
HP Housing
Energizing
Ring
“U” Ring
Seal
Support Concentric
Ring Seal Energized Wicker
Profiles
Casing
Hanger
94
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
HC-PADPRT
Part No: H56570-4
Operating Service Procedure OSP 24031
Tool Casing Capacity 1.25m lbs. (120ksi hanger)
1.0m lbs. (80ksi hanger)
Tool Stinger Capacity 165,000 lbs (4 ½’’-8rd)
Max Test Pressure 15,000psi
Pressure to set Seal 3,000psi
Pressure below Tool 5,000 psi (with no load)
Top Tool Connection 6 5/8 FH Box
Bottom Tool Connection 4 ½’’-8rd Box
Max. Torque capacity 8,000 ft-lbs
Torque to rotate Stem 700 – 1,200 ft-lbs.
Max. weight down on Tool 300,000 lbs.
Flow-by 27 in2
Tool OD 18.592 in
Stem I.D. 3.00 in
Length 94.98 in
Weight 3,206 lbs.
95
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Pressure-Assist Drill Pipe Running Tool (PADPRT)
Stem
Setting Sleeve
96
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Setting Sequence: Step 1a
9 5/8’’ CH
Step 1b:
9 5/8’’ CH
98
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Setting Sequence: Step 2
Step 2:
99
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Setting Sequence: Step 3a
100
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Setting Sequence: Step 3b
Polypak in position and Sealing on PADPRT Body 15-25 kips lbs weight down will complete
Positioning of Seal on to Hanger Shoulder
Smart Latch Triggered
Seal in position and Energized on Wellhead ID Energized Bulk Seal will Seal on ID of
Wellhead
9 5/8’’ CH
101
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Setting Sequence: Step 4
9 5/8’’ CH
102
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Setting Sequence: Step 5
Step 6
PADPRT (Pressure Assist Drill Pipe Running Tool) Once BOP Testing is complete
release 100k lbs Tension to 5k
9 5/8’’ CH
104
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-E Seal Assembly
Similar to MS-1 Seal but with additional Tin Indium Inlay
105
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
SG-TPR Seal Assembly
Seals annulus between casing hanger and wellhead in different are from MS-Seals
Two separate seals are integral to SG-TPR, a metal-to-metal bi-lip seal and an
elastomer pack-off
The SG-TPR is axially set and energized with minimum 15k lbs weight
Seal is robust and sets/seals in heavy cuttings, offset hangers and gumbo.
106
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
SG-TPR Seal Assembly
107
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
NSP & Wear Bushing
Section
108
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾’’ Nominal Seat Protector
NSP OD 18.60 in
NSP I.D. 17.61 in
Length 42.32 in
Weight 307 lbs.
109
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾’’ x 13 3/8’’ Wear Bushings
110
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18-3/4” x 13-3/8” Wear Bushing
Wear bushing-to-
hanger seal
Anti-rotation Pin
Lockdown “D” Ring
111
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾’’ x 10 3/4’’ Wear Bushings
112
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾’’ x 9 5/8’’ Wear Bushings
113
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
18 ¾’’ x 10 ¾’’ or 9 5/8’’ Wear Bushings
Plug Tool
Seal Area
Casing Drift
Spear Tool Bore Diameter
Catch Area
Spear Tool
Test Area
Wear Bushing-
to-Hanger Seal
Anti-rotation Pin
Lockdown
“D” Ring
114
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Wear Bushing Running / Retrieving Tool
Part No: H56123-2
Operating Service Procedure OSP 24033
Tool Load Capacity 500k lbs. (4 ½’’ IF Box)
Max Test Pressure 15,000psi
Top Tool Connection 4 ½’’ IF Box
Bottom Tool Connection 4 ½’’ IF Box
Tool rotation to function Tool ¼ RH turn
Flow-by 12 in2
Tool OD 18.56 in
Stem I.D. 3.75 in
Length 49.00 in
Weight 1,354 lbs.
115
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Wear Bushing Running / Retrieving Tool (WBRRT)
Centralizer
Locking Pin,
interfaces to J slot
Flowby Holes
116
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Retrieving the NSP with the Spear Tool
Spear Tool
Spear Tool
Large Slips
NSP
117
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Wear Bushing “D” Ring Retention Profile
118
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Jet Sub
119
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS Test Tool
Section
120
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
MS-700 Test Tools
121
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
BOP Isolation Test Tool
122
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
BOP Isolation Test Tool
Seal Retainer
J Block
“C” Ring
10o Cam
123
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Isolation Test Tool Seated Above NSP in Wellhead
Isolation
Test Tool
Nominal Seat
Protector
124
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Plug Type Test Tool
125
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Plug Type Test Tool
Stem
127
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Corrosion Cap
128
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Corrosion Cap Pod Line Interface
129
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Corrosion Cap Running/Retrieving Tool
130
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Corrosion Cap R/T J-Slot Interface
Spring Loaded
J-Slot Interface
Retainer Plate
131
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Running Tool Interface
Emergency
Equipment
132
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Retrieval Tools
133
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Retrieval Tool
134
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Seal Retrieval Tool
Mule Shoe
Stem J Pin
Hydraulic Fluid
Pressure-test Seals
Piston
135
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Mill and Flush tool
136
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Mill and Flush tool
Impression Block
137
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
13 3/8’’ Bridging Hanger
138
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
13 3/8’’ Bridging Hanger
Running Tool Dual
Anti-rotation Slot Latch Groove
139
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved
Thank You
140
GE Confidential and Proprietary Information
GE©2007 All Rights Reserved