Professional Documents
Culture Documents
RM Receipt Area
LINEAR
BEARING
OPERATION:
Date: 02/27/2015
PAG
Fabrication Process
Inspection
Final Assy
inspection plate
N/A
1 OF 1
QA Area
Shipping Area
Start
Heat Treat
Race
Grinding
Noise Test.
Graduation Process
Ramp Grinding
process.
Stamped bearing
(Model & date code).
VISUAL AID
SPM40 & SPM50 PROCESS FLOW
Part No. :SPM40 & SPM50
Drw:
N/A
RM Receipt Area
LINEAR
BEARING
OPERATION:
Date: 06/03/2015
Fabrication Process
Start
Molding Area
Metalic Balls
Area
PAG
1 OF 2
Final Assy
QA Area
N/A
Shipping
Area
Raw Material is
received.
Cut raw material to
build plate.
Assembly
bearings SPM40
or SPM50
WITHOUT Wiper.
Develop the
following
inspection:
1- OD Ring Gage.
2- ID Plug Gage
Go/
No Go.
3- Rotation & lack
of
balls.
4- Coast Test.
Heat Treat
100% Noise
inspection
100% Noise
Test
Weight test
100%
Race
Grinding
Engraving/Marki
ng Bearing
Ramping process.
Apply grease
inside bearing.
Install WIPER
into bearing.
Graduation Process
Apply grease
outside bearing
(see work inst).
Plate inspection
Metalic Balls
Area
Finish
RM Receipt Area
Raw Material is
received. (TEP 205
Resin)
Fabrication Process
Molding Area
Metalic Balls
Area
Final Assy
QA Area
Molding process
Annealing in oven
Assemble plastic
sleeve and retainer
manually
QA Approval
100% Visual
Inspection
Raw Material is
received. (TEP 631
Resin)
Molding process
Remove plastic
excess
QA Approval
100% Inspection
QA Approval
Raw Material is
received. (TEP 631
Resin)
Lapping process
Shipping
Area