You are on page 1of 16

Command:

Command: _scale 1 found

Specify base point:


Specify scale factor or [Copy/Reference]:
Command: _u Scale GROUP
Command:
Command:
Command:
Command: _copy 1 found

Current settings: Copy mode = Multiple


Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>:
Specify second point or [Array/Exit/Undo] <Exit>:
Specify second point or [Array/Exit/Undo] <Exit>:
Command:
Command:
Command:
Command: _rotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found

Specify base point:


Specify rotation angle or [Copy/Reference] <90>: 90

Command:
Command:
Command:

Command: _move 1 found

Specify base point or [Displacement] <Displacement>:


Specify second point or <use first point as displacement>:
Command:
Command:
Command:
Command: _erase 1 found

Command:
Command:
Command:
Command: _copy 1 found

Current settings: Copy mode = Multiple


Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>:

Command:
Command: Z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e

Command: TRIM

Current settings: Projection=UCS, Edge=None


Select cutting edges ...
Select objects or <select all>: 1 found

Select objects: 1 found, 2 total

Select objects: 1 found, 3 total

Select objects: 1 found, 4 total

Select objects: 1 found (1 duplicate), 4 total

Select objects: 1 found, 5 total

Select objects: 1 found, 6 total

Select objects: 1 found, 7 total

Select objects: 1 found, 8 total

Select objects: 1 found, 9 total

Select objects: 1 found, 10 total

Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: _u
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify
opposite corner:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

No intersections in the interior of the curve.


Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]: _u
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify
opposite corner:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify
opposite corner:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify
opposite corner:
No objects crossed by crossing window.
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:
Command: Z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:


Automatic save to C:\Users\Rismoyo Nahri
F\appdata\local\temp\Drawing2_1_1_5652.sv$ ...

Command:
Command: Z
ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or


[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e

Command: ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or


[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: z

Requires a distance, numberX, or option keyword.

Specify corner of window, enter a scale factor (nX or nXP), or


[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e

Command: TRIM

Current settings: Projection=UCS, Edge=None


Select cutting edges ...
Select objects or <select all>: 1 found

Select objects: Specify opposite corner: 0 found


Select objects: 1 found, 2 total

Select objects: 1 found, 3 total

Select objects: 1 found, 4 total

Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify
opposite corner:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:
Command: Z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e

Command: TRIM

Current settings: Projection=UCS, Edge=None


Select cutting edges ...
Select objects or <select all>: 1 found

Select objects: 1 found, 2 total

Select objects: 1 found, 3 total

Select objects: 1 found, 4 total

Select objects: 1 found, 5 total

Select objects: 1 found, 6 total

Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]: Specify opposite corner: Specify
opposite corner:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:
Command:
Command:
Command: _polygon Enter number of sides <6>:

Specify center of polygon or [Edge]:


Enter an option [Inscribed in circle/Circumscribed about circle] <I>: I

Specify radius of circle:


Command:
Command:
Command:
Command: _copy 1 found

Current settings: Copy mode = Multiple


Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>:

Command:
Command:
Command:
Command: _scale 1 found

Specify base point:


Specify scale factor or [Copy/Reference]:
Command:
Command:
Command:
Command: _scale 1 found

Specify base point:


Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Extremely small scale factor ignored.

Command: _u Scale GROUP


Command: Z
ZOOM

Specify corner of window, enter a scale factor (nX or nXP), or


[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e

Command: TRIM

Current settings: Projection=UCS, Edge=None


Select cutting edges ...
Select objects or <select all>: 1 found

Select objects: 1 found, 2 total

Select objects: 1 found, 3 total

Select objects: 1 found, 4 total

Select objects: 1 found, 5 total

Select objects: 1 found, 6 total

Select objects: 1 found, 7 total

Select objects: 1 found, 8 total

Select objects: 1 found, 9 total

Select objects: 1 found, 10 total

Select objects: 1 found, 11 total

Select objects: 1 found, 12 total

Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:

Select object to trim or shift-select to extend or


[Fence/Crossing/Project/Edge/eRase/Undo]:
Command:

Opening an AutoCAD 2010/LT 2010 format file.


Regenerating model.

AutoCAD menu utilities loaded.*Cancel*

Command:

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application or


Autodesk licensed application.

Command:

Command:
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 17.53
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 4.38
Command:
Command:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 3.08
Command:
Command:
Command: _dimaligned
Specify first extension line origin or <select object>:

Specify second extension line origin:


Specify dimension line location or
[Mtext/Text/Angle]:
Dimension text = 5.06

You might also like