Professional Documents
Culture Documents
: ________
Enrolment No.___________
Date: 13/09/2013
Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q.1
(a) State the rules for the selection of rotor slots. Describe the methods for reducing the 07
Q.2
07
07
Q.3
Q.4
Q.3
07
07
07
07
07
(b) Find the current in the bars and end rings of a cage rotor of a 6 pole 3 phase, 07
induction motor having 72 stator slots with 15 conductors in each slot if the
stator current per phase is 20A and rotor slots are 55. Hence find the suitable
size of the cage bars and end rings.
Q.4
OR
(a) Explain the factors affecting the selection of Air gap of three phase Induction 07
Motor.
(b) Find the main dimensions, no of stator turns, and number of stator slots of a 07
30 H.P., 440 Volt, 3 phase, 50 Hz , 960 rpm, sq. cage Induction motor using
following data:
Specific magnetic loading=0.45wb/m2,Sp.ele.loading=250amp.condctors/cm
full load efficiency= 0.86, full load p.f. =0.87.Assume that stator winding is
delta connected, for normal running.
1/2
Q.5
(a) Explain the designing of capacitance value for maximum starting torque in case of
07
(b) State the procedure for designing an auxiliary winding in case of resistance
split phase induction motor.
Q.5
07
OR
(a) Explain the terms critical speed and run away speed with reference to 07
synchronous machine.
(b) Explain evaluation of Direct and Quadrature axis reactance of Alternator.
07
*************
2/2