Professional Documents
Culture Documents
Code Name
Drake
Size
AWG
795.0
Stranding
(AL/STL)
26/7
Diameter
Individual
Wire
Aluminum
0.1749 Inches
Diameter
Individual
Wire
Steel
0.1360 Inches
Diameter
Steel Core
0.4080 Inches
Diameter
Complete
Cable
(O.D.)
1.108 Inches
Weight
Per
MFT
AL
750.3 Lbs
Weight
Per
MFT
STL
344.2 Lbs
Weight
Per
MFT
TOTAL
1094 Lbs
Content - Al
68.53 %
Content - Stl
31.47 %
Rated
Breaking
Strength
31500 Lbs
Resistance
DC
20 C
Per MFT
(ohm)
0.0214
Resistance
AC
75 C
per MFT
(ohm)
0.0261
Rating
907 Amps
Reel Size
PULLER-TENSIONERS
MAX PULL
MAX SPEED
25 kN
2.5 km/h
4.25 km/h
15 kN
TENSIONER PERFORMANCE
MAX TENSION
MAX SPEED
25 kN
5 km/h
Note: the basic machine performance is calculated at 20C and at sea level
CHARACTERISTICS
BULL-WHEEL DIAMETER
1500 mm
36 mm
10 mm
2300 kg
MASS
1/2
ENGINE
DIESEL
COOLING SYSTEM
ELECTRICAL SYSTEM
34 kW (46 hp)
water
12 V
HYDRAULIC TRANSMISSION
Closed hydraulic circuit thatALLOWS stepless speed variation in both rotating
directions.
This machine is provided with a pull presetting system that maintains the pre-set pulling
value (also when the speed is reduced to 0) by automatically adjusting the operation
speed according to the friction and unexpected loads which may occur.
CONFIGURATION
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control of maximum pull
Hydraulic oil cooling system
Digital meter counter
Control instruments for hydraulic system and Diesel engine
Rigid axle for towing at max speed of 30 km/h with mechanical parking brake
Hydraulic power pack to control 1 drum stand with hydraulic motor or 1 reel winder
Gearbox with 3 operating positions:
neutral position (with free bull-wheels for conductor loading and unloading)
low tension position (15 kN)
nominal tension position
Electronic pull and speed recorder kit (instrument not included)
Hydraulically actuated front plough stabiliser
Grounding connection point