Professional Documents
Culture Documents
Line Trap
Features
The 9550 Line Trap features low loss and modular design. PLC is able to design line traps according to customer
requirements given the various application parameters such as outline dimensions and short time current per IEC
Series 2 standards.
The PLC 9550 Line Trap is inserted in series with high voltage a.c. power transmission lines to prevent loss of
carrier-frequency signal power in the range of 30 to 500 kHz. It also minimizes interference from carrier signalling
systems on adjacent power transmission lines.
November 2009
Construction
The PLC 9550 Line Trap consists of three parts: main coil, tuning device and protective device.
MAIN COIL
The main coil carries power frequency currents as well as short-circuit currents of the power system. The main
coils are made of several layers of insulated rectangular aluminum cable and epoxy resin fiberglass which results in a very strong structure. This manufacturing method also proves effective against ultraviolet rays and
aging. The main coils spiders, made of flat aluminum alloy connected by fiberglass ties, yield traps that provide
high mechanical strength, corrosion-resistance and low loss.
TUNING DEVICE
The tuning device generally constists of a capacitor, inductor and resistor. The tuning device combined with the
main coil forms a resonant circuit to block carrier signals. High voltage polystyrene film capacitors are used to
provide a line trap insulation margin that is much higher than that required by IEC 353.
PROTECTIVE DEVICE
The protective device is used to protect the main coil and the tuning device. It can limit lightning and switching
over-voltages applied across line traps to a certain extent. Depending on the voltage across the main coil,
lightning arrestors or zinc-oxide valve disks are used, which are specially designed for the PLC 9550 Line Trap.
Service Conditions
Mounting Options
a. Suspension line traps are provided with one, two, or four suspension points and eyenut(s), which must
be turned tightly during assembly to mount the line trap in a vertical state.
then
b. For pedestal mounted line traps, aluminum pedestal(s) should be mounted to the lower spider first,
connected to the post insulator. For large line traps with three or four supports, every support
November 2009
Specifications
Inductance of Main
Coil
Ln
(mH)
Band No.
6 kHz BW 4 kHz BW
0.1
340-500
300-400
265-340
245-300
230-275
210-245
133
109
0.2
260-500
220-360
186-280
164-228
150-195
135-170
95
79
0.3
208--500
164-300
142-228
124-184
116-164
104-140
78
65
0.5
160-500
120-268
96-168
80-124
72-106
60-78
62
51
1.0
84-500
70-208
58-126
48-84
42-64
40-60
45
40
1.5
64-500
40-84
32
30
2.0
48-500
Application chart for line traps with a blocking impedence of 800 Ohms. The blocking resistance is not less than 570
Ohms for wide-band traps, and is at least 800 Ohms for single-frequency traps. (Line Traps with other blocking
impedances, such as 400, 600 or 1000 Ohms, are also available.)
High-pass tuning
Single-frequency tuning
Figure 2. Tuning circuits and their characteristics
November 2009
Wide-band tuning
(Table 1) STANDARD SPECIFICATIONS for the PLC 9550 Line Trap (F Class)
No.
Type
M fg. Code
XZ F-630-0.1/20-B5
BT Z11A01
2
3
0.2
0.3
BT Z12A01
BT Z13A01
0.5
BT Z14A01
5
6
1
1.5
BT Z15A01
BT Z16A01
Ikn
Ikp
Ltn Loss
(A)
(k A)
(kA)
mH
(k W)
Sus p.
Ped.
0.1
0.2
1.54
604
680
55
2.51
794
680
75
0.3
3.41
974
680
0.5
3.73
754
750
124
1
1.5
5.69
7.45
4
4
7
7
824
1054
860
930
380
380
190
244
630
20
51
Figure No.
O
y DOa
/.a DOb
/.y
/.b W
D
In
97
BT Z17A01
8.77
1134
980
XZ F-800-0.1/25-B5
0.2
BT Z21A01
BT Z22A01
0.1
0.2
1.85
2.97
4
4
7
7
664
824
690
740
420
700
300
8
9
10
0.3
BT Z23A01
0.3
3.84
884
840
126
11
12
0.5
BT Z24A01
1
1.5
BT Z25A01
BT Z26A01
0.5
1
5.51
7.28
4
4
7
7
1074
894
900
920
420
330
171
243
BT Z27A01
16
XZF-1000-0.1/31.5-B5
0.2
BT Z31A01
BT Z32A01
17
0.3
BT Z33A01
18
19
0.5
1
BT Z34A01
BT Z35A01
20
1.5
BT Z36A01
1.5
13.23
21
22
BT Z37A01
XZ F-1250-0.1/40-B5
0.2
BT Z41A01
BT Z42A01
2
0.1
16.03
3.44
5
4
8
7
0.2
4.97
0.3
BT Z43A01
BT Z44A01
BT Z45A01
6.37
8.88
4
4
7
7
754
884
26
0.5
1
0.3
0.5
1
14
27
1.5
BT Z46A01
1.5
17.14
28
29
2
XZ F-1600-0.1/50-B5
BT Z47A01
BT Z51A01
2
0.1
20.37
4.4
5
4
8
7
30
31
32
33
34
35
36
37
0.2
0.3
0.5
1
1.5
2
XZ F-2000-0.1/50-B5
0.2
BT Z52A01
BT Z53A01
BT Z54A01
BT Z55A01
BT Z56A01
BT Z57A01
BT Z61A01
BT Z62A01
0.2
0.3
0.5
1
1.5
2
0.1
0.2
6
8.25
11.35
17.51
20.5
24.56
5.4
8.55
4
4
4
5
5
5
4
4
7
7
8
8
8
8
7
8
13
14
15
23
24
25
800
25
1000 31.5
1250
40
63.8
80.3
102
1600
50
127.5
2000
50
127.5
70
100
1.5
9.11
964
1060 420
700
323
2
0.1
11.04
2.62
4
4
8
7
800
380
84
0.2
3.6
130
0.3
4.77
934
470
166
0.5
1
7.24
11.1
4
4
7
8
208
326
940
800
1010 420
1060 470
202
264
900
440
1154
1214
1294
1344
926
1116
1060
1280
1480
1650
910
1010
1140 560
38
0.3
BT Z63A01
39
40
0.5
BT Z64A01
1
1.5
BT Z65A01
BT Z66A01
BT Z67A01
44
XZ F-2500-0.1/50-B5
0.2
BT Z71A01
BT Z72A01
45
0.3
BT Z73A01
46
47
0.5
1
BT Z74A01
BT Z75A01
48
1.5
BT Z76A01
1.5
34.1
49
50
2
XZ F-3150-0.1/63-B5
BT Z77A01
BT Z81A01
2
0.1
40.45
9.37
6
4
8
8
41
42
43
2500
50
127.5
0.3
10.4
916
0.5
1
14.02
21.71
5
5
8
8
800
360
1.5
27.84
2
0.1
31.31
7
6
4
8
8
0.2
10.8
700
400
0.3
13.41
900
520
0.5
1
18.74
28.16
2
2
8
8
51
0.2
BT Z82A01
0.2
13.72
966
52
53
0.3
BT Z83A01
0.5
1
BT Z84A01
BT Z85A01
0.3
0.5
17.17
25.33
5
5
8
8
1.5
BT Z86A01
BT Z87A01
54
55
56
November 2009
3150
63
161
1330 660
900
510
38.98
1.5
2
44.97
52.52
6
6
8
8
(Table1)
2)STANDARD
HEAVY DUTYSPECIFICATIONS
SPECIFICATIONS for the
(F(F
class)
(Table
the PLC
RFL9550
9550Line
LineTrap
Trap
Class)
Mfg. Code
No.
Type
1
2
3
4
XZF-630-0.1/25-B5
0.2
0.3
0.5
BTZ11B01
BTZ12B01
BTZ13B01
BTZ14B01
BTZ15B01
1.5
In
Ikn
Ikp
T Ltn Loss
(A)
(kA)
(kA)
/
Oy y Oa
/a Ob
/b W
Susp.
Ped.
(mm)
(kg)
0.3
1.28
1.99
2.57
4
4
4
7
7
7
654
754
804
680
730
830
65
90
113
0.5
3.81
874
830
146
904
870
350
226
BTZ16B01
1.5
6.38
954
970
470
290
BTZ17B01
8.04
1114
1000
XZF-800-0.1/31.5-B5
0.2
BTZ21B01
BTZ22B01
0.1
0.2
1.7
2.72
4
4
7
7
684
684
740
840
700
350
8
9
470
10
0.3
BTZ23B01
0.3
3.56
764
890
140
11
0.5
BTZ24B01
0.5
4.26
724
870
350
190
12
BTZ25B01
6.78
914
930
410
270
13
14
1.5
2
BTZ26B01
BTZ27B01
1.5
2
8.73
9.83
4
4
7
7
994
1204
1030
1040
365
480
15
XZF-1000-0.1/40-B5
BTZ31B01
0.1
2.23
604
850
730
730
100
16
0.2
BTZ32B01
0.2
3.48
684
1000
146
17
0.3
BTZ33B01
0.3
4.23
774
1050
500
190
18
19
0.5
BTZ34B01
4
4
7
8
884
1084
1150
1190
570
530
255
395
20
BTZ35B01
BTZ36B01
5.92
9.68
1
1.5
0.5
1
1.5
11.92
1244
1300
610
900
530
21
BTZ37B01
13.85
1414
1350
XZF-1250-0.1/50-B5
BTZ41B01
0.1
2.74
654
870
1000
660
22
700
23
24
0.2
BTZ42B01
BTZ43B01
BTZ44B01
4.25
5.51
4
4
7
7
754
834
970
1070
470
480
195
245
25
0.3
0.5
0.2
0.3
0.5
6.92
934
1180
510
800
365
26
BTZ45B01
11.41
1274
1230
510
900
575
27
1.5
BTZ46B01
1.5
13.51
1454
1330
610
1000
795
28
29
BTZ47B01
XZF-1600-0.1/63-B5
0.2
0.3
0.5
1
1.5
2
XZF-2000-0.1/63-B5
BTZ51B01
BTZ52B01
BTZ53B01
BTZ54B01
BTZ55B01
BTZ56B01
BTZ57B01
BTZ61B01
2
0.1
13.67
3.76
5
4
8
7
1484
786
1560
1100
740
550
1130
190
0.2
0.3
0.5
1
1.5
2
0.1
5.6
7.29
10.22
13.75
15.75
18.08
4.28
4
4
4
5
5
5
4
7
7
8
8
8
8
7
796
906
996
1306
1436
1616
806
1080
1080
1230
1410
1590
1650
1230
530
530
550
570
700
730
570
1200
30
31
32
33
34
35
36
mH (kW)
Figure No.
0.1
0.2
630
800
1000
1250
1600
25
31.5
40
50
63
63.8
80.3
102
127.5
161
800
900
1100
1200
1300
80
115
135
260
315
435
825
1215
1520
295
37
0.2
BTZ62B01
0.2
7.11
806
1160
530
800
350
38
0.3
BTZ63B01
0.3
9.18
906
1210
550
900
440
39
40
0.5
1
BTZ64B01
BTZ65B01
0.5
1
12.41
18.95
5
5
8
8
1026
1296
1310
1490
560
990
1000
1100
590
970
2000
63
161
41
1.5
BTZ66B01
1.5
23.68
1546
1550
1040
1200
1315
42
BTZ67B01
27.6
1636
1700
1190
1610
43
XZF-2500-0.1/63-B5
BTZ71B01
0.1
6.41
816
1260
530
1400
44
45
0.2
BTZ72B01
BTZ73B01
BTZ74B01
9.17
11.87
5
5
8
8
836
926
1260
1310
510
540
900
900
450
550
46
0.3
0.5
0.2
0.3
0.5
16.26
1006
1460
610
1100
725
47
BTZ75B01
26.4
1306
1630
1100
1200
1115
48
1.5
BTZ76B01
1.5
33.02
1556
1650
1040
1300
1515
49
50
BTZ77B01
BTZ81B01
BTZ82B01
38.39
8.62
6
4
9
8
1626
1058
1860
1260
1240
650
1500
900
1910
420
51
XZF-3150-0.1/80-B5
0.2
2
0.1
0.2
12.37
1068
1450
610
1100
635
52
0.3
BTZ83B01
0.3
15.85
1098
1600
780
1200
780
53
0.5
BTZ84B01
0.5
22.18
1248
1820
1290
1400
1070
54
BTZ85B01
34.31
1508
2020
1490
1600
1570
55
56
1.5
2
BTZ86B01
BTZ87B01
1.5
2
42.87
49.5
6
6
9
9
1708
1898
2100
2250
1490
1640
1700
1900
2170
2760
November 2009
2500
3150
63
80
161
204
320
= suspension type
= pedestal type
= rated inductance
= rated continous current
= rated short-time current, r.m.s./Duration
= asymetrical peak of Ikn
= 75 C power loss
= height of line trap
= weight of line trap
= outer diameter including anti-corona ball or anti-corona ring
= central distance between lifting holes
= central diameter of pedestal brace flange
Please Note:
Corona balls are not required on line traps with rated continuous current below 800A, and therefore are not
supplied.
For heavier traps, we do not use suspension mounting in general, therefore there is no suspension mounting
drawing is provided in the catalog tables.
Non-standard trap characteristics can be supplied upon request.
XZ F
Ordering #
1250
1.0/ 50
B5
Design serial
Line Trap
Mfg. code
Closed type
b. Short-time current
a. Continous current
c. 1.0mH
Rated inductance
Figure 3. Example for ordering
Other Items required (not pictured in Fig. 3): d. Line voltage/frequency, e. Minimum blocking impedance or
resistance, f. Suspension or pedestal mounting mode, g. With or without bird barriers, h. Altitude
November 2009
November 2007
Figure 5)
5. Outline
Outline for
for line
line trap
trap (suspension
mounting)
(suspensionmounting)
(Figure
November 2009
November 2009
November 2009
10
NOTES
November 2009
11
USA
2100 Ponce de Leon Blv
Suite 1178
Coral Gables, FL 33134; USA
Tel (786) 552 0035
Fax (786) 552 0037
email: plci@plcpower.com
Venezuela
Calle 8, Edif PLC
Caracas, Venezuela
Tel (582) 212 243 6055
Fax (58) 212 243 6064
email: info@plc.com.ve