Professional Documents
Culture Documents
Author:
Peter Mills
HPC Administrator
University of Plymouth
Run application you will see security warning window, click run to start
application.
Depending on which cluster you are using.
Enter 141.163.170.133 (fotcluster1) or 141.163.170.236 (fotcluster2) in the
host Name.
Ensure Connection Type is SSH.
Enter Cluster or something you will remember in Saved Sessions.
Click to save.
Once saved, you can now select the session you require, in this case Cluster
and then click to open.
Page 1 of 2
To now login to the cluster you will need to enter your user name <press enter>
When prompted enter your password <press enter>
Note: - your password is not displayed as you type it in.
If login was successful you should see a similar window as below, with your
user name (e.g. <username>@fotcluster1)
Page 2 of 2