This document provides a 3 question midterm test on thermodynamics. Question 1 asks students to determine the heat needed and initial and final pressures of water heated from 30C to 80C in a 1250 liter tank. Question 2 asks students to calculate the heat and work for an isobaric process where the volume of 2 moles of air doubles. Question 3 asks students to analyze the cooling of 10kg of R-134a refrigerant in a 145 liter tank where the pressure drops from 7.7 bar to 3.875 bar, calculating energies, enthalpies, temperatures, and sketching the process on a p-v diagram.
This document provides a 3 question midterm test on thermodynamics. Question 1 asks students to determine the heat needed and initial and final pressures of water heated from 30C to 80C in a 1250 liter tank. Question 2 asks students to calculate the heat and work for an isobaric process where the volume of 2 moles of air doubles. Question 3 asks students to analyze the cooling of 10kg of R-134a refrigerant in a 145 liter tank where the pressure drops from 7.7 bar to 3.875 bar, calculating energies, enthalpies, temperatures, and sketching the process on a p-v diagram.
This document provides a 3 question midterm test on thermodynamics. Question 1 asks students to determine the heat needed and initial and final pressures of water heated from 30C to 80C in a 1250 liter tank. Question 2 asks students to calculate the heat and work for an isobaric process where the volume of 2 moles of air doubles. Question 3 asks students to analyze the cooling of 10kg of R-134a refrigerant in a 145 liter tank where the pressure drops from 7.7 bar to 3.875 bar, calculating energies, enthalpies, temperatures, and sketching the process on a p-v diagram.
THERMODYNAMICS Time: 60min. Friday, May 08, 2015 References are allowed Question 1
(3 marks)
Lets study a 1250liter-tank containing 2kg of H2O at initial
temperature t1 = 30oC. After heating the tank, its final temperature is t2 = 80oC. Determine the heat needed and the pressures of H2O at the initial and final states. Question 2 (3.5 marks) Lets study two moles of air contained in a piston-cylinder assembly at p1 = 2bars and t1 = 32oC. After doing an isobar process, the volume V2 = 2V1. Determine the HEAT and WORK exchanged between the pistoncylinder assembly and its surroundings. Question 3 (3.5 marks) Consider a 145litre-rigid tank containing 10kg of refrigerant R-134a at p1 = 7.7bar. After cooling, the pressure of the refrigerant in the tank is p 2 = 3.875bar. a. Determine the specific internal energy, the specific enthalpy and the temperature of refrigerant R-134a at the initial state. b. Determine the specific internal energy, the specific enthalpy and the temperature of refrigerant R-134a at the final state. c. Calculate the heat rejected from the tank. d. Show the process on the p-v diagram.