Professional Documents
Culture Documents
Primary uses
Surface coating particularly suitable for elastic coatings.
MASTERTOP TOP COAT 44P offers improved UV
resistance and greater resistance to scratching and general
abrasion.
Typical properties*
Mixing ratio part A : part B
Density at 20C, mixture
Touch dry
Curing, to foot traffic
Potlife at 20C
3 : 1 by weight
1.05 gm/cm (colourless)
1.30 gm/cm (coloured)
After approx. 4 hours
After 24 hours
Bearing loads after approx. 3 days
Approx. 1.5 hours
Guide to application
MASTERTOP TOP COAT 44P is normally applied, but not
restricted to, elastomeric MASTERTOP products.
Advantages
Substrate preparation
Elastic
Good chemical resistance
Excellent resistance to abrasion
UV stable
Good adhesion to polyurethane and epoxy substrates
Colour
Clear or coloured
Packaging
MASTERTOP TOP COAT 44P is available in 10kg packs.
Coverage
0.08-0.12kg/m per coat.
Storage
Store under cover out of direct sunlight and protect from
extremes of temperature. In tropical climates the product
must be stored in an air conditioned environment.
Failure to comply with the recommended storage conditions
may result in premature deterioration of the product or
packaging. For specific storage advice consult MBT's
Technical Services Department.
Note
Field service, where provided, does not constitute
supervisory responsibility. For additional information
contact your local MBT representative.
MBT reserves the right to have the true cause of any
difficulty determined by accepted test methods.
* Properties listed are only for guidance and are not a guarantee of
performance.
www.degussa-cc.ae
e-mail: marketingcc.mideast@degussa.com
Certificate No.
963680
As all Degussa technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.
Certificate No.
945787
Certificate No.
772556