You are on page 1of 4

FAILURE

No water is pumped out after pump


operation,and pressure gauge no reading
Tidak ada air dioutelt pompa setelah pompa
operasi, dan pengukur tekanan tidak membaca

Water pumped out and discharging pressure are not


enough during operation

REASON
1.Water level of feed piping
pressure at the specified t
1.water level dari feed wate
Tekanan pada suhu terten
2 Rotation direction of pump
2.arah putaran pompa sala

.Water level of feed piping is lower than the vaporization


pressure at the specified temperature
1.water level dari feed water piping lebih rendah dari penguapan yang
Tekanan pada suhu tertentu (level dearator rendah)
Rotation direction of pump is wrong
2.arah putaran pompa salah

Solution
1.Check and take actions to im
1.Check dan mengambil tinda
2.Correct the rotating directio
2.Check arah rotasi

.Check and take actions to improve the water input pressure


.Check dan mengambil tindakan untuk meningkatkan tekanan inlet water dan make up level dearator
.Correct the rotating direction
.Check arah rotasi

p level dearator

You might also like