Professional Documents
Culture Documents
TEMS Oeration Steps
TEMS Oeration Steps
when we finish the install ,we will found the view as follow:
3Basic information by
4Basic information
1Map and
engineer
2Service
and
neighbors
5Rx_level and Rx_quality
window
Second:
genral cellfile load add .
press configuration
For we can see Rx_level and quality clearly when we do the drive
test. Operation stes as bellow:
Chart
And also we can set the service cell line when you do the drive
test .
All of the above interface was set up later ,just need to connect
the GSP and cell phone(K790).
Mobile phone setting : MS1 is dedicate mode ; MS2 is
idle mode
Pls remember the port of MS and GPS , do not replace the
mobile and GPS port unless it is not working.
set mobile and GPS port
Times calling
Call duration
Call setup
time
Lock BCCH
When you finish connection ,we can lock the BCCH as bellow:
Required field
Display
cell_name
Rx_level
Firstly export the Rx_level form tems , operation steps as
bellow:
Click the
button
Setting
Rx_level
Clcik
recalc
Save as
B Rx_quality
We are same steps with Rx_level , when you export file form
tems,it is Rx_quality format. The details are as follows:
Combine
logfile
Choose
logfile
,
Field is Rx_qual Sub , set ranges Styles and Legend.
After you finish the ranges set , next step is style setting, and
last step is legend setting . The details are as follows:
Save sa
Standard
name
C FER layer
Notes:
1 if your laptop power off or disconnect
with device ,
you must check the MS1 and MS2 ,
sometimes we found the MS3 exist
2
All of the above chart are kept to same
size .
3 During the test, if the path has more than
cluster level,