You are on page 1of 1

Current Transformer Design Software

Current Transformer Design Software


This design routine assists design engineers in choosing the most appropriate core material and size for a
number of different current transformer (CT) topologies. Namely, the following three CT styles are included:
* Traditional (often line frequency) Current Transformers Traditional Current Transformers fall
into a general category known as instrument transformers. Their main purpose is to produce, from the primary
current, a proportional secondary current that can easily be measured or used to control various circuits. The
primary winding is connected in series with the source current to be measured, while the secondary winding is
normally connected to a meter, relay, or a burden resistor to develop a low level voltage that is amplified for
control purposes.
* Hall Effect Current Transformers The characteristics of a Hall Effect generator make it suitable for
detector elements in magnetometers, clamp-on DC-AC ammeters, transducers, magnetic field variation
meters, and wattmeters.
In the specific case of current sensors, the Hall generator/sensor is placed within air gap of a magnetic core.
The core is usually a toroid, and features a soft magnetic material (such as ferrite, Molypermalloy powder, or
Kool Mu). An initial core size is chosen to support the central primary conductor, and a gap is estimated to
accommodate not only the thickness of the Hall Sensor itself, but also to ensure that the correct flux field will
be set up within the core material at the sensors peak current to be detected.
* SMPS Current Transformers - Current Transformers for SMPS designs are used to sense current levels
within the control loop of the power supply. The current transformer in this scheme (usually made using a
ferrite toroid) helps to track the current in the control circuits feedback loop. This current is then used to
determine how the future behavior of the SMPS will be modified. For instance, the duty cycle (for pulse width
modulated systems) might be altered for future switching cycles.

You might also like