The document discusses how to format and transfer data using the GOTEK system's built-in formatting function and UFA1M44-100 emulator model. The process involves pressing two buttons while powering on the emulator to start the formatting process, which takes 1-2 minutes. After formatting, a USB stick plugged into the emulator will be recognized as a removable floppy drive on Windows, where different partitions can then be used to transfer data.
The document discusses how to format and transfer data using the GOTEK system's built-in formatting function and UFA1M44-100 emulator model. The process involves pressing two buttons while powering on the emulator to start the formatting process, which takes 1-2 minutes. After formatting, a USB stick plugged into the emulator will be recognized as a removable floppy drive on Windows, where different partitions can then be used to transfer data.
The document discusses how to format and transfer data using the GOTEK system's built-in formatting function and UFA1M44-100 emulator model. The process involves pressing two buttons while powering on the emulator to start the formatting process, which takes 1-2 minutes. After formatting, a USB stick plugged into the emulator will be recognized as a removable floppy drive on Windows, where different partitions can then be used to transfer data.
How to use format function built-in U100version emulator and use
model UFA1M44-100 to transfer data SFR1M44-U100K SFR1M44-U100K-R SFR1M44-TU100K SFRM72-TU100K UFA1M44-U100 with buili-in format function Format usb stick into partitions Plug usb stick(need FAT16/32 format ) on emulatorkeep the 2 buttons pressedpower onthe three 8segment display from 000-999after format finished, it return 000 total need about 1-2 minutes Transfer data Plug usb stick on emulator UFA1M44-U100connect to computerit will be recognize as a removable floppy driver Aor Bunder WINDOWS XP/2000/7select different partitions to transfer data under WINDOWS