Professional Documents
Culture Documents
Windsor - Mini Pro Carpet Extractor
Windsor - Mini Pro Carpet Extractor
(4 Gallon)
MPRO
10080390
MPROEU
10080400
MPROGB
10080410
MPROAU
10080420
86037780-AF
08/15/11
OVERVIEW
The carpet extractor is a mains powered, portable extractor intended for commercial use. The appliance sprays a
cleaning solution onto the carpet, agitates the wet carpet, and then extracts the soiled solution back into the units
recovery tank. The appliance can be fitted with an accessory tool for cleaning upholstery and stairs.
Warranty Registration
Thank you for choosing our product. Warranty registration is quick and easy.
Your registration will allow us to serve you better over the lifetime of the product.
To register your product go to:
http://warranty.karcherna.com/warrantyregistration.aspx
Table of contents
Machine Data Log & Overview . . . . . . . . . . . . . . . . . 2
Table of contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . 4
Safety
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . 5
HAZARD INTENSITY LEVEL . . . . . . . . . . . . . . . . . . 7
GROUNDING INSTRUCTIONS . . . . . . . . . . . . . . . . 9
Safety Label Location . . . . . . . . . . . . . . . . . . . . . . . 10
Operation
Technical Specifications . . . . . . . . . . . . . . . . . . . . . 11
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Controls & Components . . . . . . . . . . . . . . . . . . . . . 13
Filling The Solution Tank . . . . . . . . . . . . . . . . . . . . 14
Operating the Machine . . . . . . . . . . . . . . . . . . . . . . 15
Operating Machine With Accessory Tools . . . . . . . 16
PARTS
Brush Deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Decal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame & Wheels . . . . . . . . . . . . . . . . . . . . . . . . . .
Handle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tank & Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wiring Diagram - Main 230V . . . . . . . . . . . . . . . . .
Wiring Diagram-Control Panel 115V . . . . . . . . . . .
Wiring Diagram-Vacuum, Brush
Motor & Pump 115V . . . . . . . . . . . . . . . . . . . . . . .
Wiring Diagram-Control Panel 230V . . . . . . . . . . .
Wiring Diagram-Vacuum, Brush
Motor & Pump 230V . . . . . . . . . . . . . . . . . . . . . . .
Hose Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
26
28
30
32
34
38
40
42
44
46
48
50
52
53
53
Maintenance
Protect From Freezing . . . . . . . . . . . . . . . . . . . . . . 17
Daily Regular Maintenance. . . . . . . . . . . . . . . . . . . 17
Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . . 17
Maintenance Instructions . . . . . . . . . . . . . . . . . . . . 18
Brush Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Spray Jet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Brush Motor Removal . . . . . . . . . . . . . . . . . . . . . . . 19
Pump Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Vacuum Motor Removal . . . . . . . . . . . . . . . . . . . . . 20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
The MAINTENANCE section contains preventive maintenance to keep the machine and its components in
good working condition. They are listed in this general
order:
Periodic
Daily/Regular
Troubleshooting
Safety
Safety
Safety
The following symbols are used throughout this guide as indicated in their descriptions:
WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or
property damage.
FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper
operating condition. Following is information that signals some potentially dangerous conditions to the
operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate
all safety devices on the machine. Please take the necessary steps to train the machine operating
personnel.
FOR SAFETY:
DO NOT OPERATE MACHINE:
Unless Trained and Authorized.
Unless Operation Guide is Read and understood.
In Flammable or Explosive areas.
In areas with possible falling objects.
WHEN SERVICING MACHINE:
Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the
machine. Use only manufacturer approved replacement parts.
Safety
Les symboles ci-dessous sont utiliss travers ce manuel comme illustr dans leurs descriptions :
ATTENTION - Dangers ou mthodes dangereuses qui pourraient provoquer des blessures lgres ou
une dtrioration du produit ou des biens immobiliers.
POUR VOTRE SCURIT : ce signe permet d'identifier les mesures de prcaution prendre pour
assurer un bon fonctionnement du matriel.
Rendre compte immdiatement d'une dfaillance ou d'une dtrioration de la machine. Ne pas utiliser la
machine si celle-ci ne fonctionne pas correctement. Lire soigneusement les informations ci-dessous
signalant certains dangers potentiels pour l'oprateur de la machine. L'oprateur doit tre absolument au
courant de ces dangers potentiels. Localiser tous les dispositifs de scurit sur la machine. Il est
conseill de prendre les mesures ncessaires pour former le personnel oprateur.
POUR VOTRE SCURIT :
NE PAS MANOEUVRER LA MACHINE :
Lorsqu'on n'est pas expriment ou qualifi.
Lorsque le guide d'utilisation n'est pas t lu ou compris.
Dans des zones inflammables ou explosives.
Dans des zones o des objets peuvent tomber.
Safety
THIS PRODUCT IS FOR COMMERCIAL
USE ONLY.
ELECTRICAL
In the USA this machine operates on a standard 15
amp 120V, 60 hz, A.C. power circuit. The amp, hertz,
and voltage are listed on the data label found on each
machine. Using voltages above or below those
indicated on the data label will cause serious damage
to the motors.
EXTENSION CORDS
If an extension cord is used, the wire size must be at
least one size larger than the power cord on the
machine, and must be limited to 50 feet (15.5m) in
length.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock. This appliance is equipped with a cord
having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
GROUNDED
OUTLET BOX
GROUNDED
OUTLET
ADAPTER
TAB FOR
GROUNDING SCREW
METAL SCREW
GROUNDING
PIN
(A)
(B)
(C)
Safety
Safety Label Location
The following WARNING LABEL(S) are found on your cleaning unit. These labels point out important Warnings and
Cautions which should be followed at all times. Failure to follow warnings and cautions could result in fatality,
personal injury to yourself and/or others, or property damage. Follow these instructions carefully! DO NOT remove
these labels.
NOTE: If at any time the labels become illegible, promptly replace them.
Les TIQUETTES D'AVERTISSEMENT suivantes se trouvent sur votre unit de nettoyage. Ces tiquettes
signalent les avertissements et mises en garde importantes qui doivent tre suivis en tout temps. Le non respect
des avertissements et mises en garde pourrait entraner des dommages matriels, des blessures graves ou mme
la mort. Suivez attentivement ces instructions ! NE PAS retirer ces tiquettes.
REMARQUE : Si, tout moment, les tiquettes deviennent illisibles, remplacez-les rapidement.
WARNING LABEL
PART NUMBER 86220140
PRV 500895
10
Operation
Technical Specifications
MODEL
ITEM
Floating Brush
Main Jet Solution Pump
Accessory Solution Pump
Solution Capacity
Recovery Capacity
Brush Speed
Wheels
Vacuum Shoe
Solution Spray
Power cord
Height
Length
Width
Weight
Electrical
MEASURE
(1) 3 stage, 1.5hp 100 cfm (2.8cubic meters/min.)
Waterlift - 120 (305cm)
10 (25.4cm)
Solenoid Style
Solenoid Style
4.6 Gal (17.3L)
3.9 Gal (14.7L)
1160 rpm
(2) 10 dia. (25cm) by 2 (5cm)
12 (30.48cm) cast aluminum
1 quick change jet
25 (7.6m) (14 gauge)
39 inches (100cm) (Handle adjusted to highest position)
27 inches (69cm) (Handle adjusted to highest position)
14 inches (36cm)
75 lbs. (34kg)
115V, 15A, 60Hz
Electrical
Vacuum Motor
ALL
10080390
10080400
10080410
10080420
Height
Width
Length
11
Operation
Chemicals
To avoid electric shock use indoors only.To reduce risk
of fire, do not use volatile substances. Use only
cleaners intended for carpet application.
Inspection
Suitable Chemicals
Alkalis
Defoaming Agents
Detergents
Soaps
Vinegar
Hydroxides
12
Incompatible Chemicals
Aldehydes; Butyls
Carbon Tetrachloride
Chlorinated Bleaches
Chlorinated Hydrocarbons
Trichlorethylene
Phenols; Methyls (MEK)
Perchlorethylene (perc)
Aromatic Hydrocarbons
D-Limonene
Operation
2
11
10
12
3
13
2. Main Handle
3. Solution Button
Sprays solution on floor when pressed.
13
Operation
Filling The Solution Tank
14
Operation
15
Operation
Operating Machine With Accessory Tools
This extractor is easily adapted for use with Windsor
accessory tools: Contact Customer Service for details.
Cet appareil n'est pas conu pour aspirer des poussires dangereuses.
16
Maintenance
Protect From Freezing
Periodic Maintenance
17
Maintenance
Maintenance Instructions
Spray Jet
Only qualified maintenance personnel are to
perform repairs.
NOTE: To prevent a clogged jet due to alkali buildup, the spray system should be flushed with 1 to 2
gallons of clean hot water at the end of each day.
1. Turn off switch and unplug machine.
Brush Assembly
4. Pull off the clip mounting the jet to the frame. Push
the jet and hose out of the mounting hole in the
frame.
5. Loosen the hose clamp and pull the jet out of the
hose.
6. Reverse the process to reinstall the jet. Be sure to
have jet rotated correctly before installing clip. Clip
tab must face back of machine.
NOTE: Do not use pins or wire to remove obstruction
if clogged, this may damage jet and alter spray
pattern.
18
Maintenance
Brush Motor Removal
Pump Removal
19
Maintenance
Vacuum Motor Removal
1. Turn off switch and unplug machine.
End Cap
Carbon
Brushes
Inportant:
These brushes wear quicker as the length shortens due to
increased heat. Spring inside brush housing will damage
motor if brushes are allowed to wear away completely.
20
3 [9.5mm]
8
Periodically check the length of the carbon brushes. Replace
both carbon brushes when either is less tan 3/8" (9.5mm)
long.
Maintenance
Troubleshooting
PROBLEM
No power, nothing runs.
CAUSE
Is the cord plugged in.
Circuit breaker tripped in building.
Faulty switch.
Faulty power cord or pigtail.
Vacuum circuit breaker tripped.
Faulty main switch.
Loose wiring.
Faulty vac motor.
Plug in cord.
Reset breaker.
Call for service.
Call for service.
Reset breaker.
Call for service.
Call for service.
Call for service.
Replace as necessary.
Replace or repair as necessary.
Turn off vac motor. Drain and rinserecovery tank.
SOLUTION
21
Maintenance
Troubleshooting
Problem
Worn brush bearings
Cause
Squealing or grinding sound in
brush housing.
22
Solution
Replace bearings.
Make several passes at right angles to each other.
Use a pre-spray.
Replace spray jet which is producing a fine mist.
Clean solution filter screen located inside lower
tank.
Clean or replace jet. Do not use a wire to clean
jet. Damaged jet will cause over-saturation.
Check for and correct any loose wires. Repair or
replace.
Replace switch in handle.
PARTS
Brush Deck
2
1
3
15
16
8
11
10
13
5
7
12
6
1
7
14
17
24
Brush Deck
REF
PART NO.
PRV NO.
QTY
1
2
3
4
5
6
7
8
9
10A
10B
11
12
13
14
15
16
17
86173020
86217390
86215260
86223780
86223300
86214970
86229020
86005640
86173330
86247110
86306720
86217920
86223490
86216430
86216040
86173220
86223350
86010680
70916
270146
11051
70896
64115
03124
09163
57030
87513
53146
140893
67468
140912
02506
70954
64125
87030
5
1
1
2
1
1
2
2
2
1
1
1
2
2
1
2
1
1
DESCRIPTION
SCR, M5 X 10, PHMS, ISO7045, SS
COVER, PULLEY, BRUSH DECK
BELT, HTD 5MM 69T 9 WIDE
SET SCR, M4 X 6LG, CP BLK
PULLEY, BRUSH
AXLE, PIVOT, BRUSH DECK
BEARING, BRUSH PLASTIC
NUT, 10-32 HEX NYLOCK
WASHER, M5, FLAT, ISO7093, SS
MOTOR, 115V BRUSH DRIVE
MOTOR ASM, 230V DC PM
BRKT, FLOATING BRUSH, 10 IN
RING, 10MM EXT SNAP, DIN 471
BUSHING, BRUSH PRESSURE
BRUSH, CHEVRON, 10 IN
SCR, M6X12 PHCS, 12.5MM HD,SS
PULLEY, MOTOR
WASHER, 3/8 ID X 3/4 OD NYLON
SERIAL NO.
FROM
NOTES
115V ONLY
230V ONLY
25
Control Panel
11
10
9
2
1
7
3
12
26
Control Panel
REF
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
5A
5B
6A
6B
7
8
9
10
11
86007200
86002010
86173140
86217410
86230140
86001780
86291460
86198130
86223420
86302680
86292300
86173350
86216300
72162
14942
70945
270152
14622
14308
141047
67622
87515
140956
1
2
2
1
1
1
1
1
1
1
2
2
2
SERIAL NO.
FROM
NOTES
115V ONLY
230V ONLY
115V ONLY
230V ONLY
230V ONLY
230V ONLY
27
Decal
2
1
28
Decal
REF
PART NO.
PRV NO.
QTY
1
2
3
86221090
86221470
86013720
501128
501208
-
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
29
8
10
1
9
11
7
13
6
4
5
30
12
REF
PART NO.
PRV NO.
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
86215830
86173010
86216290
86218090
86225530
86172630
86173220
86226050
86011880
86214980
86272750
86219480
86291130
140897
70915
140895
35360
85086
57314
70954
89279
03125
67010
41567
-
1
6
1
1
1
6
6
2
2
1
2
2
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
31
Handle
26
27
38
13
23
18
22
21
17
44
33
19
28
45
20
32
25
24
49
46
48
31
36
34
37
24 29
36
31
8
40
39
5
41
37
30
13
42
35
43
7
47
6
14
1
16
2
15
9
4
10
11
12
32
Handle
86012660
86218570
86225910
86218560
86225140
86224650
86216470
86219460
86216440
86219660
86221790
86217360
86277600
86008650
86222600
86224150
86222340
86259430
86173220
86224930
86224460
86224140
86217380
86010640
86270800
86217350
86172870
86215520
86233170
86217140
86288380
86217030
86173030
86005640
86218230
86218220
86013730
86173320
86006770
86288680
86266080
38342
38343
38341
72204
730392
140922
41553
140934
48113
51548
270138
70882
80604
66887
730405
57512
87485
70954
730012
730406
730404
270144
87016
57014
270135
70898
140921
20054
23732
23706
23710
70917
57030
35376
35375
87510
70323
87230
76040
40
86296620
41
42
43
44
45
46
47
48
49
86292550
86296610
86296600
86292560
86266630
86297150
86297160
86298790
86173140
70945
QTY
DESCRIPTION
3
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
4
1
1
1
1
2
1
1
4
1
1
1
1
1
3
1
1
1
1
3
2
4
1
AS
REQD
1
1
1
1
1
1
1
1
4
SERIAL
NO.FROM
115V ONLY
230V ONLY
230V ONLY
*(2)
*(2)
*(2)
*(2)
*(2)
*(2)
*(1)
*(1)
*(1)
*(1)
NOTES
33
Solution
34
Solution
REF
PART NO.
PRV NO.
QTY
1A
1B
2
3
4
5
6
86201110
86201120
86240520
86010640
86006770
86215450
86304750
250-78
250-78A
40097
87016
70323
140930
-
2
2
4
2
2
1
1
DESCRIPTION
PUMP, 110/120 60HZ FLOJET
PUMP, 220/240V 50HZ FLOJET
HOSEBARB, 1/8MPT X 1/4 90D
WASHER, #10 LOCK EXT STAR
SCR, 10-32 X 1/4 PHTR PLTD
BOX, PUMP MOUNT
SHEILD, PUMP ENCLOSURE
SERIAL NO.
FROM
NOTES
115V ONLY
230V ONLY
*(1)
35
Solution
36
REF
PART NO.
PRV NO.
QTY
1
2
3
4
5
6
7
86219580
86216810
86219200
86172950
86233150
86219090
86200820
44106
270131
40114
70909
20042
39728
270-11A
1
1
1
4
3
1
1
86219070
39726
9
10
11
12
13
14
15
16
17
18
86219080
86233090
86289330
86219050
86240430
86012680
86005640
86010640
86219060
86291670
39727
20016
40062
39724
40083
57030
87016
39725
-
1
7
1
1
1
1
1
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
37
38
REF
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
86225240
86002390
86011910
86291230
86217700
86291170
86291190
86007970
86172940
86224960
86172990
86218530
86225260
86216770
86215970
86173350
86291180
86291210
86173000
86291220
86292450
75471
20063
28070
73864
70908
730373
70913
38338
75472
22113
141049
87515
70914
-
1
2
2
1
1
1
1
1
6
1
4
1
1
1
2
4
1
1
2
2
1
SERIAL NO.
FROM
NOTES
39
Vacuum
3
4
8
6
7
5
3
2
(GROUND
WIRE)
40
Vacuum
REF
PART NO.
PRV NO.
QTY
86173000
70914
2A
2B
3
4
5
6
7
8
86225480
86308980
86173220
86217420
86217370
86006770
86010640
86291680
53272
70954
270703
270140
70323
87016
-
1
1
4
1
1
1
1
1
DESCRIPTION
SCR, KA40x20, PT OHS, WN1412,
PLTD
VAC MOTOR, 120V 5.7 3ST W/TUBE
VAC MOTOR ASM, 230V MINIPRO
SCR, M6X12 PHCS, 12.5MM HD, SS
COVER, VAC MOTOR
COVER, LOWER BACK
SCR, 10-32 X 1/4 PHTR PLTD
WASHER, #10 LOCK EXT STAR
GASKET, VAC MOTOR
SERIAL NO.
FROM
NOTES
115V ONLY
230V ONLY
41
L
N
G
bn
bl
sw
bn
bl
1
3
-Z1
1
ws
4
ge
-F1
25A
ws
230V/50Hz
102
102
-S1
6
OFF
4
sw
ws
ws
3
sw
-K1
-K1
-K1
/1.5 4
/1.5 3
or
2
3
OFF
A
1.5
rt
1
4
5 /1.4
6 /1.3
ge
rt
1
-F2
-S2
NO
rt
-F3
2
NC
8A
1.2
6A
A
bn
bl
sw bn
rt
ws ge
bl
sw bn
rt
ws ge
-U1
bl
ge
ws
-V1
sw
bn
rt
ws
Z4
bn
bl
-Z2
Z3
sw
ws
-M1
sw
ws
-M2
bn
M
1~
ws
-M3
M
1~
ge
Z5
42
rt
-M4
ge
ws
M
1~
ge
REFERENCE
F1
F2
F3
K1
S1
S2
X*
Z1
Z2
Z3
Z4
Z5
V1
M1
M2
M3
M4
U1
DESCRIPTION
25 AMP FUSE
8 AMP CIRCUIT BREAKER
6 AMP CIRCUIT BREAKER
MAIN RELAY
MAIN SWITCH LINE ON/OFF/ACCESSARY
SWITCH
SEE SCHEMATIC
FILTER
FILTER
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD
RECTIFIER
BRUSH MOTOR
VACUUM MOTOR
PUMP MOTOR
PUMP MOTOR
6 CONDUCTOR CABLE
43
GROUND
SCREW
NC
NO C
HANDLE
MICRO SWITCH
3 CONDUCTOR
18 GUAGE
BLACK SHEATH
YEL
RED
6 CONDUCTOR
14/16 GUAGE
BLACK SHEATH
CONNECTOR
YEL
RED
RED
GRN
GRN
BRN
GRN
WHT
WHT
BLK
GRN
BLU
PEM
STUD
BLK
11A BREAKER
VAC MOTOR
BLK
4
3 CONDUCTOR
12 GUAGE
YELLOW SHEATH
BLK
1.5A BREAKER
BRUSH MOTOR
BLK
BLK
BLU
YEL
RED
MODE
SWITCH
TOP OF
MACHINE
BLK
P/N 880464
BLK
MODE SWITCH
FRONT OF CONSOLE
"BACK
POSTION"
44
"FORWARD
POSITION"
REF
PARTNO.
PRV NO.
QTY
86218840
41573
86226230
880464
3
4
86218830
86226250
41572
880466
1
1
DESCRIPTION
SERIAL
NO.FROM
NOTES
HARNESS, MAIN
WIRE ASM, CONTROL PANEL
JUMPER
HARNESS, HANDLE
WIRE, 14" BLACK/14 76010
45
RED
GRN
PUMP
ACC
WHT
WHT
GRN
PUMP
MAIN
RED
BRN
BRN
GRN
WHT
BLK
BLU
BLK
FULL
BRIDGE
RECT
WHT
BLU
CONNECTOR
WHT
GRN
BLK
GRN
BOTTOM OF
MACHINE
GRN
GRN
GRN
BRUSH
MOTOR
PEM
STUD
WHT
G
R
N
WHT
GRN
VAC
MOTOR
BLK
G
R
N
GRN
BACK COVER
46
REF
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
86226250
86223460
86303670
86303680
88884
67499
-
3
1
1
1
SERIAL NO.
FROM
NOTES
47
GROUND
SCREW
NC
NO C
MICRO
SWITCH
3 CONDUCTOR
18 GUAGE
BLACK SHEATH
YEL
RED
6 CONDUCTOR
14/16 GUAGE
BLACK SHEATH
YEL
GRN
GRN
RED
RED
BRN
GRN
WHT
BLK
GRN
BLU
GRN
6A BREAKER
VAC. MOTOR
PEM
STUD
BLK
BLK
R
E
D
WHT
.8A BREAKER
BRUSH MOTOR
EMI
FILTER
8
B
R
N
B
R
N
B
L
U
BLK
W
H
T
YEL
P/N
86305240
FUSE
25A
MODE
SWITCH
B
L
U
BLU
W
H
T
RED
TOP OF
MACHINE
5
W
H
T
B
L
K
WHT
FRONT OF CONSOLE
BLK
3 CONDUCTOR
12 GUAGE
YELLOW SHEATH
O
R
G
W
H
T
"BACK
POSTION"
"FORWARD
POSITION"
4
3
R
E
D
8
6
RELAY
48
86218840
86218830
86012400
86012420
86226250
86012430
86012410
86302680
86223420
41573
41572
880466
67622
QTY
1
1
1
1
1
1
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
HARNESS, MAIN
HARNESS, HANDLE
WIRE ASM, 18GA 4" BLK
WIRE ASM, 18GA RED
WIRE, 14" BLACK/14 76010
WIRE ASM, 18GA WHT
WIRE ASM, 18GA 4" ORG
ASM, FILTER EMI MAIN
RELAY, 10A 230VAC SPDT
49
RED
GRN
PUMP
ACC
WHT
BRN
GRN
GRN
PUMP
MAIN
RED
BRN
GRN
WHT
WHT
BLK
BLU
BRN
B
L
K
W
H
T
FULL
BRIDGE
RECT
WHT
B
L
K
W
H
T
BLU
BLU
3
GRN
GRN
GRN
GRN
BOTTOM OF
MACHINE
WHT
8
FERRITE
GRN
BLU
GRN
GRN
BRN
EMI FILTER
WHT
GRN
BRUSH
MOTOR
BLK
BLK
GRN
8
7
WHT
GRN
WHT
GRN
GRN
VAC
MOTOR
FERRITE
BLK
6
BACK COVER
50
FERRITE
BLK
REF
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
86226310
86308960
86223390
86303680
86303670
86302670
86309300
86311030
88884
67488
-
2
1
1
1
1
1
1
2
SERIAL NO.
FROM
NOTES
51
Hose Diagram
(86289330)
(PRV 40062)
(86240430)
(PRV 40083)
(86012680)
(86219090) (PRV 39725)
MAIN PUMP
(86240520)
4X
(PRV 40097)
ACCESSORY PUMP
(86219070)
(PRV 39726)
ACCESSORY TOOL
(86200820)
(PRV 270-11A)
52
(86219200)
(PRV 40114)
TO SOLUTION TANK
JET
(86219580)
(PRV 44106)
Spare Parts
PART NO.
PRV NO.
86216430
86229010
86216040
86223350
86223300
86215260
86247110
86306720
86217390
86218090
86219580
86201110
86201120
86224960
86225480
86308980
86135320
86135330
86291230
86291190
86291460
86230140
86215720
86001780
86002010
86007200
86349430
140912
09163
02506
64125
64115
11051
53146
270146
35360
44106
250-78
250-78A
730373
53272
140687
140688
14622
141047
14308
14942
72162
-
DESCRIPTION
BUSHING, BRUSH PRESSURE
BEARING, BRUSH
BRUSH, CHEVRON, 10 IN
PULLEY, MOTOR
PULLEY, BRUSH
BELT, HTD 5MM 69T 9 WIDE
MOTOR, 115V BRUSH DRIVE
MOTOR, 230V DC PM
COVER, BELT GUARD
GASKET, VAC SHOE
JET, RT ANG, 1/4 BARB
PUMP, 110/120 60HZ FLOJET
PUMP, 220/240V 50HZ FLOJET
STRAINER, RECT, 80 MESH SS
VAC MOTOR, 120V 5.7 3ST W/TUBE
VAC MOTOR ASM, MINIPRO 230V
BRUSH SET, 120V VAC
BRUSH SET, 230V VAC MTR
GASKET, DOME
SCREEN, DOME VAC INTAKE
BREAKER, 11A VDE CIRCUIT
BREAKER, 1.5A CIRCUIT
BREAKER, 6A VDE CIRCUIT
BREAKER, 0.8A CIRCUIT
BOOT, 3/8 CIRCUIT BREAKER
SWITCH, DPDT3-POSITION ROCKER
CHECK VALVE KIT
SERIAL
NO. FROM
NOTES
115V ONLY
230V ONLY
115V ONLY
230V ONLY
115V ONLY
230V ONLY
115V ONLY
230V ONLY
115V ONLY
115V ONLY
230V ONLY
230V ONLY
Accessories
PART NO.
86218790
86290360
PRV NO.
HTO
-
DESCRIPTION
HANDTOOL W/1/8 FEM QD (INCLUDES HOSE ASM)
HANDTOOL KIT (INCLUDES HOSE ASM AND CARRY BAG)
53
Serial Numbers
REF. NO
1
2
54
MODEL: SERIAL #
MPRO, MPROEU, MPROGB, MPROAU:1008039000126
MPRO, MPROEU, MPROGB, MPROAU:1008039000001