Professional Documents
Culture Documents
Press release
controlled via the ENGEL injection moulding machine CC 200 control unit. This means that
injection moulding machine operators don't have to learn how to use new technology; they
will simply be guided intuitively through the integrated injection and blow moulding process
by the ENGEL control unit which they are already familiar with.
Injection moulding machines from the ENGEL victory and ENGEL e-victory series, which
are adapted to the individual requirements of the application, can be used in the
manufacturing cells. These machines offer plenty of free space for the sliding table mould
because their clamping unit does not have a tie bar. As the mould clamping platens of tiebar-less machines can be used up to their edges or even beyond, large moulds can fit on
comparatively small injection moulding machines. Machine size can therefore now be
decided according to the required clamping force instead of the size and movement radius
of the mould, which keeps investment and operating costs low. The barrier-free mould area
also simplifies the automation process, because the robot can access the mould from the
side without being hindered.
Press release
product to another, and the production of small batches economical. As the inject2blow
process is based on standard injection moulding machines, the system can be used with
moulds for classic injection moulding products too.
With the inject2blow method, processing of preforms continues in the mould straight after the
injection moulding stage to create the finished product.
Press release