Professional Documents
Culture Documents
A Specific Goal A New Procedure To Be Implemented All of The Above
A Specific Goal A New Procedure To Be Implemented All of The Above
Velociq-101
...Choose...
Rank model
Linear model
Staged model
Process area model
6. Achieving the goal of means your product will be defect free to an extent of:
Answer :
...Choose...
a.
b.
c.
d.
...Choose...
a. V-Process Model
b. Maintenance model
c. Rational Unified Process Model
d. 2I Process Model
54. In the execution of maintenance projects each trigger from the customer is
recorded in a:
Answer :
...Choose...Change Request MRP MR Change control Register
55. In CMMI the Level 2 stage is described as
Answer :
...Choose...Managed Repeatable defined optimized
56. Project monitoring reviews are conducted :
Answer :
...Choose...
a. On a monthly basis
b. Whenever we have a client release
c. In the external audit meeting
d. By the SQA Team periodically
57. Release review process involves
ANS : (TM,PM,QC/TL)
Answer :
...Choose...
a. PM, customer and TM PM, QC, TM All team members entire team along with SQAM
and customer
58. Prior to start of the project, the PM
Answer :
...Choose...good idea - he can
guidelines it is a must to plan better on
estimation and address differences if any
should estimate
get familiar with our estimation
execution of the project verify
all of the above
77. The threshold value of Risk Score beyond which the Mitigation and
contingency plans need to be documented is
Answer:...Choose...181002745
78. The Six Sigma technique/tool recommended for use for Risk Analysis is
Answer :
...Choose...
a. Voice of Customer
b. FME
c. ARCA
d. Pugh Matrix
79. Effort Deviation means
Answer :
...Choose...
(Actual Ans: Difference b/w actual effort and planned effort expressed as % of
planned effort)
a. Variation between planned effort and actual effort+ effort to go PM's effort
allocated to the Team member Projected effort and planned effort Actually
consumed effort only
80. Which of this is not the intended use of Metrics?
Answer :
...Choose...To monitor the project performance To take appropriate
decisions based on measured values To monitor individual performance To revise
plans
81. Which of the below situations recommends an RCA?
Answer :
...Choose...Metrics computed as part of the project is better than
norm Metrics computed as part of the project is below norm Metrics is equal to
the norm All of the above
82. What is the monthly mechanism to record and track metrics of the project?
Answer :
...Choose...
a. PDMR(Project data and metrics report)
b. Work Plans
c. PMR(Project Monitoring Review)
d. ASR(Account Status Report)
83. Which metric is used for tracking change in requirements?
Answer :
...Choose...
a. Requirements Change Index
b. Requirements Volatility
c. CRs Index
d. None of the above
84. What does function point estimation mean:
Answer :
...Choose...A standard method to measure size of software projects A
Metric for effort calculation A review technique / mechanism An experimental
method to calculate project delivery time
85. A Functional specification review involves one of the following:
Answer :
...Choose...The following factors like safety, performance,
reliability are considered. Code review Identification and testing of sub
modules Validation of the work items with the environment
86. The effectiveness of the Quality Management System is continuously improved
through
Answer :
...Choose...Audit results, corrective and preventive actions, CSATs,
Management Review Sales reports, Balance sheets, Company audit reports Quality
group recruitments Individual Performance appraisals
87. Preventive action is different from corrective action in terms of
Answer :
...Choose...Fire Fighting Identifying the necessary action as soon as
the non conformities occurred Identifying the problems, waiting for its
occurrence and doing the post mortem study Identifying potential nonconformities and stops the non conformitis before occurring
88. Quality Policy
Answer :
...Choose...Should not be shown to the customer as it is very
confidentialis prepared for the Mission Quality Group is used to rate the
Mission Quality Group performance every year states a clear commitment to
quality and consistent with organization goals
89. What is re-work in a development project?
Answer :
...Choose...Working late night Working on the job repeatedly
Reviewing the specifications Bug Fixing
90.
stands for
Answer :
...Choose...International Organization for Standardization
International Systems for Organization International Systems Orientation
International Systems Organization
91. Purpose of Project performance report is to
Answer :
...Choose...provide the project team appropriate reward compute
average time it takes for screens to load To record the learnings from the
project for future referencere start the project again at a future date
92. Process improvements can be suggested by anyone in Wipro
Answer :
...Choose...TRUE FALSE Only Project Managers are eligible None of the
above
93. Prototype helps in validating
Answer :
...Choose...technology design requirements technical skills
94. PDCA stands for
Answer :
...Choose...Plan, Define, Change, AddPlan, Do, Change, AidPlan, Do,
Check, ActPlan, Define, Check, Add
95. Process improvement suggestions are periodically reviewed and evaluated for
implementation
Answer:
...Choose...
a. SQA
b. External Agency
c. SEPG
d. None of the above
96. Quality is defined as
Answer :
...Choose...
a. Ability of the product to meet stated or implicit needs of customers
b. Set of process and procedures
c. Use of checklists and templates
d. Observation
105. An assessment consists of
Answer :
...Choose...
a. Questionnaire,
b. Documents review and Interviews
c. Review of quality System Interview of customers
d. All of the above
106. is an initiative that involves measuring and analyzing business processes.
Answer :
...Choose...
a. Six Sigma
b. Root Cause Analysis
c. Pugh Matrix
d. None of the above
107. Statistical term that describes the amount of variation in data
Answer :
...Choose...
a. Normal Distribution
b. Median
c. Standard Deviation
d. Six Sigma
108. DPMO stands for
Answer :
...Choose...
A. Defects per million opportunities
B. Defects per million occasions
C. Derivations per million opportunities
D. Any of the above
109. In a six sigma project, the problem owner is
Answer :
...Choose...
A. TMGreen
B. Black Belt
C. BeltWhite Belt
110. Six sigma methodology that is used for reduction of cycle time is
Answer :
...Choose...
A. Cross Functional Process Mapping
B. DMAIC
C. DSSS
D. Six steps
111. DSSS, DMAIC and TQSS are six sigma methodologies used for
Answer :
...Choose...
a. Reduction of cycle time
b. Defect Reduction
c. Cost calculations
d. None of the above
112. is a repository of data and learning from closed projects.
Answer :
...Choose...Project Data Bank Veloci-QSix SigmaNone of the above
113. A list of project documents, quality records and customer supplied
documents are recorded in
Answer :
...Choose...Master List of Documents Project Folder Document Bank
None of the above
114. Look ahead meetings and root cause analysis are examples of
Answer :
...Choose...
a. Defect prevention activities
b. Error capture activities
c. Appraisal activities
d. None of the above
115. Triggers for root cause analysis are documented in
Answer :
...Choose...
a. Master list of documents
b. Project Dashboard
c. Project Plan
d. Quality Plan
116. At organizational level, metrics are reviewed by management in
Answer :
...Choose...Management Review Meeting Quality Review Meeting Quality
Improvement Council Any of the above
117. Schedule deviation, effort deviation, field error rate are some of the
metrics captured for
Answer :
...Choose...
a. Service projects
b. Development Projects(/conversion or porting projects)
c. Maintenance projects
d. Any of the above
118. Difference between actual end date and planned end date expressed as a % of
planned duration is
Answer :
...Choose...
a. Requirements volatility
b. Schedule volatility
c. Schedule deviation
d. None of the above
119. Ratio of product size to total project effort is
Answer :
...Choose...
a. Effort DeviationCUT productivityOverall ProductivityNone of the above
120. The ratio of defected reported during UAT to the size of project is
Answer :
...Choose...Overall ProductivityPhantom Error RatePost Delivery
defect rateAny of the above
121. Projects shared vision should be derived from
Answer :
...Choose...Organization Shared VisionCustomer & project
NeedsOrganizational process performance baselinesAll the above
122. Inputs for project initiation are
Answer :
...Choose...
a.
b.
c.
d.
Project Requirements
Contract/Proposal
Both (a) and (b)
Either (a) or (b)
123. The quality group responsible for process definition, metrics analysis and
quality assurance activities at organizational level is
Answer :
...Choose...
a. SEPG
b. SQA
c. Tools Group
d. None of the above
124. The quality group responsible for process definition, metrics analysis and
quality assurance activities at vertical/group vertical level is
Answer :
...Choose...
a. SEPG
b. SQA
c. Tools Group
d. None of the above
125. Acceptance criteria should be part of RS
Answer :
...Choose...TRUE FALSE Can be part of RS if provided by customer None
of the above
126. The mandatory members for RS and FS review are
Answer :
...Choose...
a. PM / TM
b. PM / TM / SQA
c. Either PM or SQA Team members
127. The mandatory members for review of plan documents are
Answer :
...Choose...TM, PM, SQA Either PM or SQA TM Tech Lead
128. Risk quantification is done based on
Answer :
...Choose...Risk probability and impact of riskRisk mitigationRisk
scheduleNone of the above
129. is used for tracking and monitoring risks.
Answer :
...Choose...Risk Management planProject planRisk Identification
checklistNone of the above
130. Modification of the approved process to suit the requirements of a project
is known as
Answer :
...Choose...
a. Process Tailoring
b. Process Approval
c. Process Deviation
d. None of the above
131. Modification of the approved process to suit the requirements of a project
are documented in
Answer :
...Choose...
a. Project Plan
b. Veloci-Q
c. Master List of Process
d. None of the above
132. The process model suited for projects with dissimilar service requests is
Answer :
...Choose...Service Process modelRational Unified Process ModelVProcess ModelNone of the above
Answer :
testing