This liquid particle count report from Pharmedic Laboratories provides quality control testing results for a batch of injectable solution. The report specifies that the solution must meet British Pharmacopoeia specifications allowing no more than 3,000 particles per container 10 micrometers or larger in size and 300 particles per container 25 micrometers or larger. The report documents the results of this quality testing but does not state the actual results.
This liquid particle count report from Pharmedic Laboratories provides quality control testing results for a batch of injectable solution. The report specifies that the solution must meet British Pharmacopoeia specifications allowing no more than 3,000 particles per container 10 micrometers or larger in size and 300 particles per container 25 micrometers or larger. The report documents the results of this quality testing but does not state the actual results.
This liquid particle count report from Pharmedic Laboratories provides quality control testing results for a batch of injectable solution. The report specifies that the solution must meet British Pharmacopoeia specifications allowing no more than 3,000 particles per container 10 micrometers or larger in size and 300 particles per container 25 micrometers or larger. The report documents the results of this quality testing but does not state the actual results.
Pharmedic Laboratories (Pvt) Limited Doc. No. LPC-001 Version No.:00 Truth in Medicine Next Rev:07-01-2016 Page: 1 of 1
LIQUID PARTICLE COUNT REPORT
Date: __________________
Product:
Batch No:
Batch Size:
Mfg. Date:
Exp. Date:
SPECIFICATION (BP Specs)
Solution for injection supplied in containers with a nominal content of less than 100ml. Average number of particles in the units tested not exceeds 1. 3000 per container equal to or greater than 10m. 2. 300 per container equal to or greater than 25m.