Professional Documents
Culture Documents
About us :-
MRI cages are our key product, so although we can supply general interior design
and medical centre fit out services, the design, installation and testing of MRI suites
is the main reason we exist.
We provide a full range of MRI shielding services including radio frequency shielding
design, manufacture, installation and testing. Our design teams work closely with
your key practice decision makers to help you explore all the design concepts and
finishing options available in your price range and our engineers have extensive
experience in designing MRI suites for new premises as well as suite upgrading and
magnet replacement.
Applications
This type of shielding is mainly used for application where we have transformers,
electric Board and electric cables
1.1.1 This layer is made from a low resistive alloy, coated with Aldine, (or Equal)
and with Passivation against rust.
1.1.2 The Aluminum boards are connected together with an overlap. The
connection to the wall is made by screws threw a plastic masonry anchor, to
guaranty isolation.
9/1/2015
1.2 MAGNETIC STEEL SHIELDING LAYER
1.2.1 In order to achieve an efficient shielding, a thick coating is needed. The layer
is made from several Steel plates to gain required thickness, the amount of plates
is determined specifically for each installation, to ensure suitable protection.
9/1/2015
2.2 The thickness of the layer is determined by factors like the
attenuation needed and the magnetic field's force.
9/1/2015
2.2 R.F. SHIELDED WALLS AND CEILING PANELS
2.2.1 Type A
The modular R.F. shielded panels for walls and ceiling shall be rigid and self - centered. Panels shall
provide electrically isolated' shielding with an interior copper facing.
The interconnected panels shall be continuously soldered . Ceilings may be self - supporting or
maintained by non - magnetic hangers from the parent structure.
Maximum allowable deflection under load shall not exceed 1/240 of the panel span. When specified,
provision shall be made for removable panel sections to facilitate access to and removal of large
equipment such as the magnet
2.2.2 Type B
The panels are laminates of electrolytically deposited zinc, sheet metal laminated to both surfaces of 1/4
inch structural core. Wall, floor and ceiling panels are of the same construction.
The panels are joined and supported by specially designed members that clamp the edges of the panels
and provide constant, low impedance joints with the shielding elements of the panels.
The steel framing-joining system consists of four types of channels: "M", "U", "hat" and "flat", with the "M"
and "U" channels forming the corner joints and the "hat" and "flat" channels forming the intermediate
joints. These channels are made of 1/8 inch zinc-plated steel and have eleven grooves or serrations
running lengthwise along each side of the contacting surface. The "M" and "hat" channels have weldnuts
welded to the inside of the channels on 3-inch centers. The "U" and "flat" channels have holes punched
on 3- inch !centers to correspond to the positioning of the weldnuts.
The "flat" channel has a convex contour for positive spring tension, insuring and R.F. tight enclosure.
Screw fasteners of either zinc-plated or cadium-plated steel 1/4-inch in diameter are provided to
complete the assembly. These screws fasteners do not penetrate the "M'" or the "hat" channels. At all
corner intersections of walls, floor or ceiling, a one piece factory pre-welded corner section is provided.
This corner consists of sections of "M" and "U" channels welded together and zinc-plated.
The entire steel frame work is supplied with integral interconnecting tabs and weld screws and is
assembled from the interior using only a posi-drive head screwdriver.
This interconnecting system enables rapid assembly and installation of the enclosure
9/1/2015
2.3 R.F. SHIELDED DOORS
2.3.1 Type A
The shielded door shall have a .minimum clear opening of 48 inches by 84 inches
unless otherwise specified The door unit shall be factory assembled complete with door leaf, door frame,
threshold hardware, and electrical contact strips (''Fingerstock").
The threshold sill shall be R.F. sealed by means of two rows of fingerstock attached to the door. The two
surfaces, door and threshold sill shall be sloped providing flush passage for wheel chairs and beds and
simul taneously assuring protective spacing for the fingerstock expansion. The door shall be faced inside
and out with a hard wood veneer, solid vinyl, or as otherwise specified per arrangement.
The door shall be provided with a three point latching mechanism completing the R.F. seal and operable
from both sides of the door by a handle which will not mechanically interfere with the door frame when
the shielded door is opened or closed and which shall require less than 20 pounds to perform this action.
The door shall be equipped with three non-ferrous hinges.
2.3.2 Type B
To achieve the attenuation levels required, our doors are equipped with a minimum of two rows of
beryllium copper ''fingers'' around the periphery of the door. In the closed position, the fingers contact
the door frame to assure an RFI/EMI leak-proof seal.
A brass extrusion is mounted on the periphery of the door frame. This extrusion houses two rows of
''fingers'' which are concealed form accidental damage. The door itself has a "knife-edged'' extrusion
around it's perimeter which mates with the fingers within the frame when the door is closed. This design
results in a damage-free closure seal with highly efficient prevention of RFI/EMI leakage.
9/1/2015
Latching Mechanism
The enclosure doors are equipped with a 3-point latching mechanism for tight, RFI-EMI-secure closing.
Bearing surfaces, rollers and door cams are of case-hardened tool steel, designed to provide years of
trouble-free operation with no loss of attenuation capability due to friction and wear. Our doors are
extremely easy to operate; they require less than 20 pounds of force on the handle.
Sizes available
Our standard single-personnel-door provides a 3'0" by 7'0" high clear opening and our standard double
door provides 6'0" by 7'0" clear opening. In addition any size door may be supplied on special order to
meet particular customer requirements.
Automatic Doors
SIE can supply shielded doors with power operated latch/unlatch mechanisms-also, fully automatic doors
with open and close cycling.
9/1/2015
2.6 R.F. SHIELDED ELECTRICAL AND COMMUNICATION SERVICES
9/1/2015
3.0 INTERIOR FINISHES
3.1 FINISHED FLOOR
Unless otherwise specified, the floor of the R.F. shielded enclosure shall be finished with a solid vinyl tile
conforming to federal specification SS-T-312B. If specified a seamless or regular conductive vinyl tile, a
conductive of regular carpet, or a raised computer type floor in any of the above mentioned finishes can
be supplied as per arrangement. All elements of the raised floor shall be of nonmagnetic material. In
addition to the above a vinyl cover base shall be provided.
4.0 R. F.TESTING
The R.F. shielded enclosure shall be tested to demonstrate the R.F. attenuation in compliance with the
MIL-STD-285. Testing will be carried out at a minimum of one location on each wall and before any
finished material has been erected within the shielded enclosure. An acceptance test shall be performed
after completion of the finished room prior to occupancy by the owner.
5.0 WARRANTY
The enclosure shall be guaranteed against defective materials and workmanship and to retain the
specified R.F. shielding characteristics for a period of five years from the date of the acceptance test
except for moving parts such as the door which shall have a one year warranty.
9/1/2015
INDIA RF SHIELDING ROOM work Detail
1.AMAR MRI SCAN CENTER IN KARNAL, KARNAL
Address of Amar MRI Scan Center : 97, Jernalily Colony, Karnal,: Near Government Hospital
more
University Road, Kurukshetra H O, Kurukshetra - 132118, Inside Anand Orthopedic Hospi.
18. Ooty Government Hospital
Superintendent Government Head Quarters, Udagamandalam, Ooty-643001
Near Ooty Market
19. Shushrusha Hospital
698-B, Ranade Road, Dadar (W),
Mumbai 400028. INDIA
1. INDONASIA 15
2. UKRAIN 4
3. VIETNAM 3
4. SINGAPORE 3
5. DUBAI 2
6. NEPAL 2
7. LABNAN 1
8. NAIGERIA 1
GM Office helpline@rfshieldingwork.com