Professional Documents
Culture Documents
Physics and Measurement: Answers To Questions
Physics and Measurement: Answers To Questions
*Q1.5 The answer is yes for (a), (c), and (f ). You cannot add or subtract a number of apples and a
number of jokes. The answer is no for (b), (d), and (e). Consider the gauge of a sausage, 4 kg2 m,
or the volume of a cube, (2 m)3. Thus we have (a) yes (b) no (c) yes (d) no (e) no (f ) yes
*Q1.6 41 41 (1 L1.3 )(1 qt1 L)(1 gal4 qt) (101.3) gal 8 gallons, answer (c)
*Q1.7 The meterstick measurement, (a), and (b) can all be 4.31 cm. The meterstick measurement and
(c) can both be 4.24 cm. Only (d) does not overlap. Thus (a) (b) and (c) all agree with the
meterstick measurement.
*Q1.8 0.02(1.365) = 0.03. The result is (1.37 0.03) 107 kg. So (d) 3 digits are signicant.
SOLUTIONS TO PROBLEMS
between the tabulated densities of aluminum and iron. Typical rocks have densities around 2 000
to 3 000 kgm3. The average density of the Earth is signicantly higher, so higher-density material
must be down below the surface.
m
P1.2 With V = ( base area ) ( height ) V = ( r 2 ) h and = , we have
V
m 1 kg 10 9 mm 3
= =
r h (19.5 mm ) ( 39.0 mm ) 1 m 3
2 2
= 2.15 10 4 kg m 3 .
m
P1.3 Let V represent the volume of the model, the same in = for both. Then iron = 9.35 kg V
V
mgold gold mgold 19.3 10 3 kg/m 3
and gold = . Next, = and mgold = 9.35 kg = 23.0 kg .
V iron 9.35 kg 7.86 10 3 kg/m 3
2.3 1017 kg/m 3 /(11.3 10 3 kg/m 3 ) = it is 20 1012 times the density of lead .
4 3 4
P1.5 For either sphere the volume is V = r and the mass is m = V = r 3. We divide
3 3
this equation for the larger sphere by the same equation for the smaller:
m 4 r3 3 r3
= = = 5.
ms 4 rs3 3 rs3
P1.6 From the gure, we may see that the spacing between diagonal planes is half the distance
between diagonally adjacent atoms on a at plane. This diagonal distance may be obtained from
the Pythagorean theorem, Ldiag = L2 + L2 . Thus, since the atoms are separated by a distance
1 2
L = 0.200 nm, the diagonal planes are separated by L + L2 = 0.141 nm .
2
P1.7 (a) This is incorrect since the units of [ ax ] are m 2 s 2 , while the units of [ v ] are m s .
kg m = G [ kg ] .
2
s 2 [ m ]2
Multiply both sides by [ m ]2 and divide by [ kg ] ; the units of G are
2 m3 .
kg s 2
32 86 400 s day
This means the proteins are assembled at a rate of many layers of atoms each second!
P1.11 Conceptualize: We must calculate the area and convert units. Since a meter is about 3 feet, we
( )( )
should expect the area to be about A 30 m 50 m = 1500 m 2 .
Categorize: We model the lot as a perfect rectangle to use Area = Length Width. Use the
conversion:1 m = 3.281 ft.
*P1.13 The area of the four walls is (3.6 + 3.8 + 3.6 + 3.8)m (2.5 m) = 37 m2. Each sheet in the book
has area (0.21 m) (0.28 m) = 0.059 m2. The number of sheets required for wallpaper is
37 m20.059 m2 = 629 sheets = 629 sheets(2 pages1 sheet) = 1260 pages.
The pages from volume one are inadequate, but the full version has enough pages.
P1.15 From Table 14.1, the density of lead is 1.13 10 4 kg m 3 , so we should expect our calculated
value to be close to this number. This density value tells us that lead is about 11 times denser than
water, which agrees with our experience that lead sinks.
m
Density is dened as mass per volume, in = . We must convert to SI units in the calculation.
V
3
23.94 g 1 kg 100 cm 23.94 g 1 kg 1 000 000 cm 3
= 3 = 3 = 1.14 10 4 kg m 3
2.10 cm 1000 g 1 m 2.10 cm 1000 g 1m 3
At one step in the calculation, we note that one million cubic centimeters make one cubic meter.
Our result is indeed close to the expected value. Since the last reported signicant digit is not
certain, the difference in the two values is probably due to measurement uncertainty and should
not be a concern. One important common-sense check on density values is that objects which sink
in water must have a density greater than 1 g cm 3, and objects that oat must be less dense than
water.
(b) The circumference of the Earth at the equator is 2 ( 6.378 10 3 m ) = 4.01 10 7 m. The
length of one dollar bill is 0.155 m so that the length of 8 trillion bills is 1.24 1012 m.
Thus, the 8 trillion dollars would encircle the Earth
1.24 1012 m
= 3.09 10 4 times .
4.01 10 7 m
P1.19 Fg = ( 2.50 tons block ) ( 2.00 10 6 blocks ) ( 2 000 lb ton ) = 1.00 1010 lbs
d
dnucleus, scale = dnucleus, real atom, scale = ( 2.40 10 15 m ) = 6.79 10 3 ft , or
300 ft
P1.20 (a)
datom, real 1.06 10 10 m
3 3 3
(b) Vatom 4 ratom
3
/ 3 ratom datom 1.06 10 10 m
= = = = 2.40 10 15 m
Vnucleus 4 rnucleus / 3 rnucleus
3 d
nucleus
4
Fe rFe 3 = Al rAl 3
4
3 3
1/ 3
1/ 3
= ( 2.00 cm )
7.86
rAl = rFe Fe = 2.86 cm .
Al 2.70
4 Al rAl 3
mAl = AlVAl =
3
and
4 Fe rFe 3
mFe = FeVFe = .
3
Setting these masses equal,
4 Al rAl 3 4 Fe rFe 3 and r = r 3 Fe .
=
3 3
Al Fe
Al
The resulting expression shows that the radius of the aluminum sphere is directly proportional to
the radius of the balancing iron sphere. The sphere of lower density has larger radius. The
fraction Fe is the factor of change between the densities, a number greater than 1. Its cube root
Al
is a number much closer to 1. The relatively small change in radius implies a change in volume
sufcient to compensate for the change in density.
P1.25 Model the room as a rectangular solid with dimensions 4 m by 4 m by 3 m, and each ping-pong ball as a
sphere of diameter 0.038 m. The volume of the room is 4 4 3 = 48 m 3, while the volume of one ball is
4 0.038 m
3
= 2.87 10 5 m 3.
3 2
48
Therefore, one can t about ~ 10 6 ping-pong balls in the room.
2.87 10 5
As an aside, the actual number is smaller than this because there will be a lot of space in the
room that cannot be covered by balls. In fact, even in the best arrangement, the so-called best
packing fraction is 1 2 = 0.74 so that at least 26% of the space will be empty. Therefore, the
6
above estimate reduces to 1.67 10 6 0.740 ~ 10 6 .
P1.26 A reasonable guess for the diameter of a tire might be 2.5 ft, with a circumference of about 8 ft.
( )( )( )
Thus, the tire would make 50 000 mi 5 280 ft mi 1 rev 8 ft = 3 10 7 rev ~ 10 7 rev .
P1.27 Assume the tub measures 1.3 m by 0.5 m by 0.3 m. One-half of its volume is then
Pennies are now mostly zinc, but consider copper pennies lling 50% of the volume of the tub.
The mass of copper required is
mcopper = copperV = (8 920 kg m 3 ) ( 0.10 m 3 ) = 892 kg ~ 10 3 kg .
METHOD TWO
We add the fractional uncertainties in the data.
A = ( 21.3 cm ) ( 9.8 cm )
0.2 0.1
+ = 209 cm 2 2% = 209 cm 2 4 cm 2
21.3 9.8
1.85
= = 1.61 10 3 kg m 3
( ) ( 6.5 10 m)
2 3
4
3
and
= (1.61 0.17 ) 10 3 kg m 3 = (1.6 0.2 ) 10 3 kg m 3.
*P1.35 The tax amount is $1.36 $1.25 = $0.11. The tax rate is $0.11$1.25 = 0.088 0 = 8.80%
*P1.36 (a) We read from the graph a vertical separation of 0.3 spaces = 0.015 g .
(c) Because the graph line goes through the origin, the same percentage describes the vertical
and the horizontal scatter: 30 cm2380 cm2 = 8% .
(d) Choose a grid point on the line far from the origin: slope = 0.31 g 600 cm2 = 0.000 52 gcm2 =
(0.000 52 gcm2)(10 000 cm21 m2) = 5.2 g/m2 .
(e) For any and all shapes cut from this copy paper, the mass of the cutout is proportional to
its area. The proportionality constant is 5.2 g/m2 8%, where the uncertainty is estimated.
(f ) This result should be expected if the paper has thickness and density that are uniform
within the experimental uncertainty. The slope is the areal density of the paper, its mass
per unit area.
*P1.38 Let o represent the number of ordinary cars and s the number of trucks. We have
o = s + 0.947s = 1.947s, and o = s + 18. We eliminate o by substitution: s + 18 = 1.947s
0.947s = 18 and s = 180.947 = 19 .
*P1.39 Let s represent the number of sparrows and m the number of more interesting birds.
We have sm = 2.25 and s + m = 91. We eliminate m by substitution: m = s2.25
s + s2.25 = 91 1.444s = 91 s = 911.444 = 63 .
*P1.40 For those who are not familiar with solving equations numerically, we provide a detailed solution.
It goes beyond proving that the suggested answer works.
x 3 2 1 0 1 2 3 4
y = 2 x 4 3 x 3 + 5 x 70 158 24 70 70 66 52 26 270
We see that the equation y = 0 has two roots, one around x = 2.2
and the other near x = +2.7. To home in on the rst of these solutions y
we compute in sequence: When x = 2.2, y = 2.20. The root must be
between x = 2.2 and x = 3. When x = 2.3, y = 11.0 . The root is
between x = 2.2 and x = 2.3. When x = 2.23, y = 1.58 . The root x
is between x = 2.20 and x = 2.23. When x = 2.22, y = 0.301. The
root is between x = 2.20 and 2.22. When x = 2.215, y = 0.331.
The root is between x = 2.215 and 2.22. We could next try FIG. P1.40
x = 2.218, but we already know to three-digit precision that the root
is x = 2.22.
*P1.42 We draw the radius to the initial point and the radius to the nal point. i
The angle between these two radii has its sides perpendicular, right side
to right side and left side to left side, to the 35 angle between the original 35.0
and nal tangential directions of travel. A most useful theorem from R f
geometry then identies these angles as equal: = 35. The whole N
circumference of a 360 circle of the same radius is 2 R. By proportion, W E
then 2 R = 840 m .
S
360 35 FIG. P1.42
360 840 m 840 m
R= = = 1.38 10 3 m
2 35 0.611
We could equally well say that the measure of the angle in radians is
2 radians
= 35 = 35
840 m
= 0.611 rad = .
360 R
Solving yields R = 1.38 km.
*P1.44 We use substitution, as the most generally applicable method for solving simultaneous equations.
We substitute p = 3q into each of the other two equations to eliminate p:
3qr = qs
1 1 2 1 2.
2 3qr + 2 qs = 2 qt
2
3r = s 3r 2 + ( 3r ) = t 2
2
These simplify to 2 2 2 . We substitute to eliminate s: . We solve for the
3r + s = t 12r 2 = t 2
combination t :
r
t2
= 12 .
r2
t
= either 3.46 or 3.46
r
*P1.45 Solve the given equation for t: t = 4QLkd 2(Th Tc) = [4QLk (Th Tc)] [1 d 2].
(a) Making d three times larger with d 2 in the bottom of the fraction makes
t nine times smaller .
(c) Plot t on the vertical axis and 1/d 2 on the horizontal axis.
(d) From the last version of the equation, the slope is 4QL/k(Th Tc) . Note that this quantity
is constant as both t and d vary.
Additional Problems
and therefore
x = 1.00 10 5 m 2 = 316 m .
*P1.47 (a) The mass is equal to the mass of a sphere of radius 2.6 cm and density 4.7 gcm3, minus the
mass of a sphere of radius a and density 4.7 gcm3 plus the mass of a sphere of radius a and
density 1.23 gcm3.
(b) For a = 0 the mass is a maximum, (c) 346 g . (d) Yes . This is the mass of the
uniform sphere we considered in the rst term of the calculation.
(e) For a = 2.60 cm the mass is a minimum, (f ) 346 14.5(2.6)3 = 90.6 g . (g) Yes . This
is the mass of a uniform sphere of density 1.23 gcm3.
(h) (346 g + 90.6 g)2 = 218 g (i) No . The result of part (a) gives 346 g (14.5 gcm3)
(1.3 cm)3 = 314 g, not the same as 218 g.
( j) We should expect agreement in parts b-c-d, because those parts are about a uniform
sphere of density 4.7 g/cm3. We should expect agreement in parts e-f-g, because those
parts are about a uniform liquid drop of density 1.23 g/cm3. The function m(a) is not a
linear function, so a halfway between 0 and 2.6 cm does not give a value for m halfway
between the minimum and maximum values. The graph of m versus a starts at a = 0 with
a horizontal tangent. Then it curves down more and more steeply as a increases. The
liquid drop of radius 1.30 cm has only one eighth the volume of the whole sphere, so its
presence brings down the mass by only a small amount, from 346 g to 314 g.
*P1.48 (a) We have B + C(0) = 2.70 gcm3 and B + C(14 cm) = 19.3 gcm3. We know B = 2.70 g/cm3
and we solve for C by subtracting: C(14 cm) = 16.6 gcm3 so C = 1.19 g/cm4 .
14 cm
(b) m= 0
(2.70 g/cm 3 + 1.19 g/cm 4 x )(9 cm 2 )dx
14 cm 14 cm
= 24.3 g/cm dx + 10.7 g/cm 2 xdx
0 0
(c) When the balloon radius is twice as large, its surface area is four times larger. The new
volume added in one second in the ination process is equal to this larger area times an
extra radial thickness that is one-fourth as large as it was when the balloon was smaller.
Since 1 Mft 3 = 10 6 ft 3 ,
*P1.52
(deg) (rad) tan ( ) sin ( ) difference between and tan
15.0 0.262 0.268 0.259 2.30%
20.0 0.349 0.364 0.342 4.09%
30.0 0.524 0.577 0.500 9.32%
33.0 0.576 0.649 0.545 11.3%
31.0 0.541 0.601 0.515 9.95%
31.1 0.543 0.603 0.516 10.02%
We see that in radians, tan() and sin() start out together from zero and diverge only slightly
in value for small angles. Thus 31.0 is the largest angle for which tan < 0.1.
tan
P1.53 2 r = 15.0 m
r = 2.39 m
h
= tan 55.0
r
h
h = ( 2.39 m ) tan (55.0 ) = 3.41 m
P1.54 Let d represent the diameter of the coin and h its thickness. 55
The mass of the gold is r
2 d 2
m = V = At = + dh t
4
FIG. P1.53
where t is the thickness of the plating.
( 2.41)2
m = 19.3 2 + ( 2.41) ( 0.178 ) ( 0.18 10 4 )
4
= 0.003 64 grams
cost = 0.003 64 grams $10 grram = $0.036 4 = 3.64 cents
m m 4m
P1.58 The density of each material is = = = .
V r 2h D2h
4 ( 51.5 g )
The tabulated value 2.70
g g
Al: = = 2.75 3 is 2% smaller.
( 2.52 cm ) ( 3.75 cm )
2
cm cm 3
4 ( 56.3 g )
The tabulated value 8.92 3 is 5% smaller.
g g
Cu: = = 9.36 3
(1.23 cm )2 ( 5.06 cm ) cm cm
4 ( 94.4 g ) g
Brass: = = 8.91 3
(1.54 cm ) ( 5.69 cm )
2
cm
4 ( 69.1 g ) g
Sn: = = 7.68 3
(1.75 cm ) ( 3.74 cm )
2
cm
4 ( 216.1 g )
The tabulated value 7.86 3 is 0.3% smaller.
g g
Fe: = = 7.88 3
(1.89 cm )2 ( 9.77 cm ) cm cm
(108 cars)(10 4 mi yr )
P1.59 V20 mpg = = 5.0 1010 gal yr
20 mi gal
(108 cars)(10 4 mi yr )
V25 mpg = = 4.0 1010 gal yr
25 mi gal
r 2t = (10 21 m ) (1019 m ) ~ 10 61 m 3.
2
If the distance between stars is 4 1016 m, then there is one star in a volume on the order of
( 4 10 m ) ~ 10 50 m 3 .
16 3
P1.4 2.3 1017 kgm3 is twenty trillion times larger than the density of lead.
P1.6 0.141 nm
P1.10 9.19 nm s
P1.14 (a) 0.071 4 gal s (b) 2.70 104 m3s (c) 1.03 h
P1.18 2.57 10 6 m 3
13
P1.24 rAl = rFe Fe
Al
P1.26 ~10 7 rev
P1.28 No. There is a strong possibility that you would die before nishing the task, and you have much
more productive things to do.
P1.30 ( 209 4 ) cm 2
P1.36 (a) 0.015 g (b) 30 cm2 (c) 8% (d) 5.2 gm2 (e) For any and all shapes cut from this copy paper,
the mass of the cutout is proportional to its area. The proportionality constant is 5.2 gm2 8%,
where the uncertainty is estimated. (f) This result is to be expected if the paper has thickness
and density that are uniform within the experimental uncertainty. The slope is the areal density of
the paper, its mass per unit area.
P1.38 19
P1.42 1.38 km
P1.46 316 m
P1.50 (a) 478 cm3s (b) 0.225 cm s (c) When the balloon radius is twice as large, its surface area is
four times larger. The new volume added in one increment of time in the ination process is equal
to this larger area times an extra radial thickness that is one-fourth as large as it was when the bal-
loon was smaller.