After thinking and revising the mentioned design, the team will deliver and furnish the design through the accurate measurements of each portion of the materials that will use on the said project. These measurements will come from series of engineering calculations based on some features or properties such as mechanical, electrical, chemical, thermal, ergonomic and others. For the extruder, some of the chemical reactions will be discussed at this phase. The calculations of the flow rate of the recycled filaments shredded and melted that also occurred in the extruder will also be presented. Design of gears, screws, nozzle and the shredder will also be calculated together with its speed, as to provide with enough strength in the process of recycling the filaments. Heat applied or simply the temperature needed for the melting of the filaments shredded, losses in the motor and other parts of the machine, will also be discussed in this phase. Others will be included at the Analytical Investigation part of the next chapter.