Professional Documents
Culture Documents
I-DEAS Material Nonlinearity Tutorial
I-DEAS Material Nonlinearity Tutorial
OD = 3.0 in.
ID = 2.5 in.
Thickness = 0.25 in.
In the Plain Strain Physical Property Table form, change the value of Plastic Yield Function to 1
to allow the use of von Mises yield criterion.
Now, define a non-linear
material. Use the
Create icon to define a
generic material. Now,
select this generic
material (named
nonlinear1 in the screen
shown below). Use the
pull down menu to be
sure the material type is
set to Statics, Nonlinear
Matl. Now double click
on the Properties
(Optional) item in the
Material table to bring up
additional entries.
Boundary Condition:
Now, click on OK on this and all the subsequent forms. You may wish to change the Solution name
to a more descriptive one. Dismiss this form as well.